Toyota Tacoma Anytime Backup & New Front Facing Camera Kit Installation

In this Install & Review segment, we install our Anytime Backup & New Front Facing Camera Kit in a 2020 Toyota Tacoma.
Our kit adds a new front facing camera to your rig and allows you to access, via a switch, your new front camera and also your factory rear camera at anytime.
Grab your Anytime Backup & Front Facing Camera Kit for your 2020+ Toyota Tacoma: trailgridpro.com/shop/accesso...
Grab your Anytime Backup & Front Facing Camera Kit for your 2014 - 2019 Toyota Tacoma: trailgridpro.com/shop/accesso...
Trail Grid Pro | www.trailgridpro.com | 301.835.9100
Please comment below with any questions or feedback and we will respond promptly! If you like our content, please follow along by tapping that subscribe button.
Have a blast out there.
Trail Grid Pro | Frederick, MD | www.trailgridpro.com

[@ejforsberg612]

Installed the camera on my 2022 Tacoma. Best upgrade yet. I absolutely love it. I'm using it all the time due to my lift. Makes it easy to see everything below my hood and bumper. Very happy and satisfied with my purchase of this camera.

[@TrailGridPro]

Woohoo! We're super pumped you're happy with your Anytime kit! Thanks for your kind words!

[@citizenpark2782]

Great step by step instructional! Ty fellas

[@TrailGridPro]

Absolutely! It's our pleasure! Glad you found it helpful!!

[@Heysahs007]

Best video out there! Thanks.

[@TrailGridPro]

Thanks so much! We appreciate ya!

[@chharlorakim7346]

just finished my installation yesterday came out great 👍, also the kicker speaker installation sounds good too ,next step is subwoofer and amp 😅!

[@TrailGridPro]

Right on! We love to hear it!!

[@erickflores01]

Just installed mine. Ordered the version that comes all put together. The hardest part was mounting the camera on the grill. Everything else was a walk in the park.

[@TrailGridPro]

Great job with the installation!!!

[@senseidadproductions]

Got and installed mine - all as advertised. the hardest part of the install was routing the connectors but it was worth the effort. Great product and great instructions. BTW $30 is well worth the work they they to pre-wire the harness. thanks!

[@TrailGridPro]

Woohoo! Great news and great job on the installation!! Thanks for your super kind words!!

[@AnhH88]

I also got the 30 dollars prewired option. It saves me time for sure. I had to use my dremel tool to knotch the plastic part on my TRD Off Road grill-which takes half the time. The rest is just popping on the plastic parts and routing interior work. I didn’t know what to do with the black fuse box so it tucks behind the airbag dash. The rest works as planned.

[@PARTner91]

Looks like an Icom IC-7000 HF radio was previously installed. Awesome HF radio 😎

[@TrailGridPro]

Thanks for watching and for your comment!

[@shelbygtrag5859]

I have the factory cameras on my 2020 TRD OR but you guys do a great job of showing install and understanding of camera hook up ! Great job! Only thing missing is 360 view but great for after market install.Great price too because factory option was way more expensive!

[@TrailGridPro]

Thanks so much! We appreciate your kind words!!

[@frisko430]

Just ordered mine! Disappointed with the Tacoma lifestyle one so just decided to order yours

[@TrailGridPro]

Woohoo! Thanks so much! We appreciate ya!

[@ryan_hansen22]

What is wrong with the Tacoma Lifestyle one? Just curious what is different since that is what I just ordered. Thanks!

[@jeffwithglasses6976]

Awesome video dude

[@TrailGridPro]

Thank you so much for your kind feedback! We appreciate you!

[@JC-td4gg]

Just had mine installed by a audio install shop. Works great, nice clear video. I like being able to choose front or back viewing.

[@TrailGridPro]

Woohoo! So happy you’re happy!!

[@chharlorakim7346]

How much they charge for front camara?

[@Hansaman58]

Bought this kit from this company with the pre wired option. Glad too. Waiting for warmer temperatures to install. Good to know I should be able to install mine exactly like this video. Installed camera last Wednesday. I have a bad leg due to an accident so my installation took about six hours. Everything worked during a “dry fit” but front camera stopped working after full installation. TGP sent out a replacement component that should arrive tomorrow so I should be go to go. TGP works with their customers so contact them if you have issues. I also spent the extra $30 for pre-wired kit. Made installation much easier.

[@TrailGridPro]

Thanks so much for your purchase! Let us know if there's anything else we can help with!

[@Hansaman58]

Update! I had issues with this camera. All self-inflicted. Trail Grid Pro took care of me. My wife and I visited a daughter in Baltimore area this week and I scheduled an appointment with Trail Grid Pro for Friday, 2 Feb. Casey installed my camera and it works perfectly. Thank you Casey and thank you Trail Grid Pro!

[@rcuev5919]

Great installation video, I followed the steps and was an easy install on my OR.

[@TrailGridPro]

Fantastic news! Thanks so much! 🙏

[@michellegarza9614]

Thanks for this detailed video. I was able to install this camera onto my Tacoma today. So excited it actually works.

[@TrailGridPro]

Woohoo! So happy to hear that! We appreciate you!

[@user-blacktaco2golf]

Hello, I just received the anytime kit from the manufacturer. I’ve been checking out multiple installation videos and found yours to be the most comprehensive. I do have a question though. You used a switch location on the left side of the steering wheel and connected all the wiring ahead of time on a table. Are your harnesses all the same wire lengths as the ones in the anytime kit (I’d also like to locate the switch on the left side of the cab - and I watched another KZbin video where they added wire length to make this work)?

[@TrailGridPro]

We extend the wires in our kits to allow them to reach to the left side of the steering column.

[@rtarjwells]

Confused. On the table wiring you show the green to green to red. And black to black for a ground. In the install portion you have the green going to ground.

[@johnbailey1305]

Thanks for the detailed instructions. My TRD SPORT hood bulge always throws me off when I park. I need this! Lol

[@TrailGridPro]

Thanks for your super kind words! We appreciate ya!

[@lifeof_j]

Does this also work with Pro Grill? I'm trying to see how the camera would mount on Pro Grill if I were to swap out the grill. I'm planning to do all the work at once. thanks in advance!

[@TrailGridPro]

Yep, it’s actually way easier to mount it on the Pro grille! All you’ll do is measure your spot in the middle of the grille, drill your hole and you’re golden!

[@stevenjohnston2823]

So if I am installing the switch in the center console (by the ect power button) I can just keep all the wiring and the relay right there behind the display?

[@TrailGridPro]

Yep, you sure can!

[@russgaddy]

Where does the relay mount on a 2022 TRD Sport Tacoma? The video doesn’t mention it after the connections are made? What about 12V power to the fuse box? Nothing is mentioned about power either as the installation progresses?

[@TrailGridPro]

Thanks for your message! You can mount the relay wherever you’d like. Most use 3M Velcro to mount it near your switch. Power comes from the head unit, you don’t need to run power to the fuse box.

[@subradiant_music]

just the fact that you mentioned the microfiber just made you an OCD customer's dream. I hate seeing dudes just tossing the dash on the shifter on any car and not even use non marring prying tools on everything they do. It's annoying and frustrating. also I love the dig on the 10mm socket haha that sucker hates being found

[@TrailGridPro]

Thank you so much for your super kind words! We appreciate you very much!!

[@royb2797]

The camera comes with the front / rear controls system. I like to know that camera can fitting front view camera logo embedded, at 2014 Tacoma Thanks

[@TrailGridPro]

Yep, it can definitely fit your 2014! Here’s the kit for your rig: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-14-19-tacoma/

[@glennhiltz9234]

Looks good! thinking about getting one for my 22 TRD Sport, what about us Canadians, it doesn't specify pricing is in US $$????? or what the conversion is ???

[@TrailGridPro]

Great question! Feel free to reach out and we'll get you a price!

[@Spartan-zx2nq]

Everything seems to work except that my switch only turns to front camera. As I switched to the neutral position of the button is shows the rear camera for a slight second then it goes to my regular unit screen. Is it a bad switch or wired wrong?

[@TrailGridPro]

That's normal as the feed is switching from the front view to the normal position (i.e. rear camera view) since they pass through the same video feed.

[@troy3456789]

I had already installed it in front of the shift knob, and I realized that is a mistake since I want to install a USB 3.0 power plug on the right. I want to move it to the left side. I'm wondering if there is enough wire to make it over to the left side without having to extend it.

[@TrailGridPro]

Great question! Did you purchase the kit from us?

[@ryanriggs2282]

Can anyone tell me why some videos say to tap into a 12v power source for the red wire in the engine bay for the camera? I have a '21 and its is hooked up just like this one (triple checked wiring and grounds) and black image from front cam. Can feel/ hear relay click when going to front cam. Im using a Raayoo front cam. The only thing I can think of is that I need to tap into a power source for the red wire. That or the camera is bad. Thanks.

[@TrailGridPro]

The videos that show running 12v power are older and not required anymore when you purchase our complete kit. I’m not familiar with the front camera you have so unfortunately not much help I can provide (maybe it does require power?) - but, generally, if the front camera doesn’t work and all other functionality works then it’s usually due to a weak front camera ground.

[@jonnytacooutdoors]

Great video. Do you not need to run wires to the rear?

[@TrailGridPro]

Nope! It utilizes your factory rear camera!

[@royb2797]

Did the front and rear camera control system work with 2014 Toyota Tacoma Pre Runner Extended Cab Pickup? Thanks

[@TrailGridPro]

Yep, it sure does! Grab one here: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-14-19-tacoma/

[@rickypalomares9786]

I have a slight line that swipes across the screen, any idea what could be the culprit? Bad ground, or something else?

[@TrailGridPro]

For the front camera I assume? Yep, it could be a weak ground - the other possibility is that when running the front camera wire through the firewall it could have been damaged internally which is interrupting the feed.

[@xxxxMaddnesSxxxx]

This is awesome! Gonna have to get this in the near future. Do you know if there is a higher quality replacement for the backup camera? The front one you provide looks so much higher resolution.

[@TrailGridPro]

Our front cameras are very similar quality to the 2020+ rear cameras!

[@patkap41]

This video is top notch. Thanks so much for the needed detail to perform this task. I'll be picking up one of these soon

[@TrailGridPro]

Thanks so much for your kind words! We appreciate ya!

[@SkinWalker_Taco]

Pretty straight forward install. Positive wire that doesn’t get connected at the end threw me off a bit, but other than that everything was clear. Definitely needed to modify the bottom of the tss sensor bracket (like shown). Stoked overall!

[@TrailGridPro]

Woohoo! Great job!!

[@schlong1011]

On a 2016 Tacoma, how would I have the switch be illuminated when DRL or headlights are on?

[@TrailGridPro]

The easiest way is to connect the blue to red from the switch and grey to ground. That will always illuminate your switch!

[@duncan8542]

I installed it and it works, but the default screen goes to my rear camera. Not the Toyota Home screen. It WILL switch to the front cam, but when the switch is on the middle position its the rear cam,,, any ideas?

[@TrailGridPro]

That doesn't sound right! Did you buy it from us? Give us a shout and we'd be happy to help: trailgridpro.com/pages/contact

[@marklalone3091]

It appears that not all ground wires are black. It appears the green wire on the relay switch is a ground wire. Right?

[@TrailGridPro]

Hmm, the black is ground. Did you buy the kit from us?

[@joemejiadronepilot773]

Hey , I have trd of road 2021 this camera is work ? I live in New Jersey we close to Maryland where are your located

[@TrailGridPro]

We’re in Frederick, MD! Yep, here’s the kit for your rig: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-20-tacoma/

[@chharlorakim7346]

I like it ,great job well done ,I can't do it ,how much you charge to do it for my Tacoma?😂

[@TrailGridPro]

You can do it! If you'd prefer to have us do the install for you, feel free to shoot us an email or give us a call!

[@hemiman1967]

Do you have a video to install the switch under the heater controls?

[@TrailGridPro]

We don't but the install is exactly the same. Just pop out a switch under the heater controls and install it there - you can use a grounding point on the side of the head unit.

[@Genesis12nivana]

@@TrailGridPro I'm trying to order one now. Do you have a valid coupon I could use?

[@SAPPER510]

How does the front camera gets power if the red wired is capped off?

[@TrailGridPro]

From the main harness.

[@kevinodonnell8353]

Great video, very informative! How long did it take to install and how much did you charge the customer?

[@TrailGridPro]

Thank you for your super kind words! Install is about 2 hours and our current install rates are $120 the first hour, $80 each additional hour.

[@paulsiebenaler3618]

2019 Tacoma Access Door SR5 The only blue / Grey wires I have are in the Switch and have no clue how to connect since the other wire harness doesnt have a blue and grey as in the video. Please advise since im not a wire expert. Thank you

[@TrailGridPro]

The 14-19 kit does not have a blue or gray wire from the harness. You can connect the blue wire to red from the switch and the gray wire to ground from the switch and that will allow your switch to illuminate at all times.

[@paulsiebenaler3618]

@@TrailGridPro Thank you for the quick response. Is there a way to have the switch light when headlights are on or only can be illuminated at all times?

[@TrailGridPro]

@@paulsiebenaler3618 You’d have to tap into your illumination wiring within your vehicle.

[@frankthetank2286]

Does it beet when you get close to something like how the reverse does

[@TrailGridPro]

Great question! This kit does not interfere with your factory collision sensors!

[@fabienpics]

Wowwww great product. Very good video job and explaining 👍👍👍👍

[@TrailGridPro]

Thank you so much for your super kind words! We appreciate you!

[@kyleguthrie4598]

Accidentally cut the wrong wire when following this video, is there anything I can do to fix it?

[@TrailGridPro]

You can solder the wires back together, or use a butt connector!

[@billbeams7875]

Is the installation the same on a 2019 Tacoma? Do the body parts remove the same as your 2020? Thanks

[@TrailGridPro]

It’s pretty much exactly the same disassemble and reassembly. The kits are different for 2019 versus 2020 but installation is basically exactly the same.

[@billbeams7875]

@@TrailGridPro many thanks

[@luissantiago147]

Not sure if this question was brought, but those this work if you already have the 360 cam option like in my limited? 😊

[@TrailGridPro]

Great question! Unfortunately this kit is not compatible with the factory 360 cam.

[@luissantiago147]

@@TrailGridProThat would be awesome if it did.

[@Mark-vs3hx]

What about the dimmer wiring for the switch?!?

[@TrailGridPro]

For 14 to 19, if you want the switch to always illuminate you will connect the blue from the switch to red, and grey from the switch to black.

[@JoseDiaz-mc3uf]

what shop did the install on this video, are they still doing installs?

[@TrailGridPro]

We did it in our shop in Frederick, MD!

[@ejforsberg612]

Just got my kit today. Ready to install it this weekend using your excellent video. I can't wait to get it installed. I do have a question as to where you mounted the relay.?

[@TrailGridPro]

Woohoo! We’re excited for you! You can mount it anywhere that’s convenient for ya. We typically use a heavy sticky Velcro to attach it.

[@ejforsberg612]

​@@TrailGridPro: It's like you're reading my mind man. Thanx for getting back with me and much appreciation again for the outstanding video. The Nerds were a nice touch..........

[@TrailGridPro]

@@ejforsberg612 haha! It’s absolutely our pleasure! Glad you liked the nerds! 🙌

[@sammyperez7921]

Hi. This camera work wit my Sony XAV-AX8000 radio

[@TrailGridPro]

If your head unit install currently uses the factory wiring connections, this kit is compatible! Some additional wiring may be required.

[@victorrael8714]

ugh... after 4-months of a great working anytime camera kit, all of a sudden I'm now getting blank screens both front and back. I'm not sure where to trouble shoot since all was working good before.

[@TrailGridPro]

Thanks for reaching out and sorry to hear shout the issues! I’d check your relay ground to make sure it’s still solid. We suggest removing the ground and then reseating it in the same place. Then, also unplug and then replug in both harnesses and let us know how that goes! Feel free to continue this conversation via our support line at [e-mail]

[@victorrael8714]

@@TrailGridPro thanks, will try that my next day off.

[@TrailGridPro]

@@victorrael8714 Okay, if it doesn’t let us know! We’re here to help!

[@goride365]

Wish I would've used the metal fisher tape and tapped it all the way to the length to the second connector that goes through the firewall grommet ... got the first connector through and then while trying to get the second one though I severed the wire completely off of the connecter pulling too hard on it... it was a super tight fit on a 2022 trd Offroad... so I got to take it all out... otherwise it was simple up to that point 🤣🥴

[@TrailGridPro]

Oh no! Hope you got it all worked out!!

[@goride365]

@@TrailGridPro I did.. kind of.. I had to get 2 kits… each kid had extra ground tapped into the power wire at the switch which made the rear camera not work… literally just one strand that was missed upon the assembly by the company… not the best of luck with them but at least I got it sorted out.

[@jturner3206]

Watched the video, this drove me to purchase the setup for TGP. The box arrived at my door in record time. The install was easier than expected. I do have a question about the camera specifically. The camera moves around in the metal base. Not sure if this is normal. So the picture tends to change a little from time to time as I drive.

[@TrailGridPro]

Hmm, the camera angle can change with the new HD camera - it shouldn't move though without the amount of force we can provide with our fingers. We may want to send you another camera to test out. Hit us up here: trailgridpro.com/pages/technical-support

[@TheCapitanAmericano]

Is this comparable with a 2015 Tacoma?

[@TrailGridPro]

Yep, here’s the kit for your rig: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-14-19-tacoma/

[@BrianLiming]

I just had this kit installed on my Tacoma and it works great. Thank you.

[@TrailGridPro]

Awesome news!! So happy to hear it! We appreciate ya!

[@Genesis12nivana]

@@TrailGridPro does this kit apply for 2022 Tacoma's?

[@TrailGridPro]

@@Genesis12nivana Yep, it sure does! trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-20-tacoma/

[@Genesis12nivana]

@@TrailGridPro I ordered it last night. I'll be back with an update after the install.

[@bawilian2211]

I have a 2021 Tacoma sr 5. I was wondering if this would match with it. Anyone know?

[@TrailGridPro]

It will absolutely work in your rig! Here’s the product page for the one for your rig: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-20-tacoma/

[@bawilian2211]

I recently order a different camera but there was a plug that did not match. I’m really hoping this one fit.

[@TrailGridPro]

@@bawilian2211 Yes, ours will definitely work with your Tacoma.

[@projectd9272]

Were can I get the panel for the switch Since its a smaller switch?

[@TrailGridPro]

Cali Raised sells a panel that replaces the coin slot.

[@projectd9272]

@@TrailGridPro Yea I found it a day after I posted this. Its installed and works great just need to install more stuff to cover the other holes now 👍🏽

[@brytondeguia8645]

I have a blue and grey off the switch with no blue and grey coming off the harness. Got my kit a while ago and am finally installing it. Any idea if this is an old style kit or what I’m supposed to do with the extra blue and grey wires? Thanks!

[@TrailGridPro]

If you want your switch to always illuminate you can connect the blue to red from the switch and gray to ground (black).

[@stoned_kapre]

will this work for a +23 siennas?

[@TrailGridPro]

We've never tested it but it might!

[@JoelWalkerofthe828]

Just ordered this, would be great if it could loop record both cameras to an external SSD or SD card.

[@TrailGridPro]

Thanks for your order! As of now, the Anytime camera is not a recording device but we have dash cam bundles that can take care of that for you! trailgridpro.com/camera-shop/

[@trop7490]

Porque no viene montado y listo para instalarlo

[@TrailGridPro]

¡Vendemos dos versiones! ¡Puedes comprarlo premontado o el Kit desmontado!

[@freddygabriel2405]

Great Video. I have a question even though I'm probably over analyzing. I have a 2019 SR5 Tacoma. Is the power to run this system being supplied through the connections coming from the radio? You capped off the red wire from the camera and only have ground wires exposed. Does this mean I don't need to worry about drawing 12 volts from a fused source? Thank you!

[@TrailGridPro]

Yep, all the power comes from the radio!

[@freddygabriel2405]

@@TrailGridPro So, if I decide to purchase the unassembled kit for the 2019 Tacoma, will I follow the exact steps that you outlined in the assembly? Or is the assembly slightly different for both kits?

[@TrailGridPro]

@@freddygabriel2405 The 14-19 kit does not have a blue and gray wire - so the workaround to illuminate your switch is to connect the blue wire to red from the switch and gray to black (ground) from the switch.

[@freddygabriel2405]

@@TrailGridPro My final question is, will the premium camera included in the kit be mountable to the "Tacoma Pro Camera Brcket" sold by Taco Vinyl? Thank you for your quick responses. I will be purchasing this system soon.

[@TrailGridPro]

@@freddygabriel2405 Yes, I believe it should work!

[@user-gf7lg4lf8l]

where to buy video harness for 2021+

[@TrailGridPro]

trailgridpro.com/products/anytime-backup-new-front-camera-kit-20-tacoma

[@yoloyolo5253]

I snipped the green wire and I still have grid lines

[@scoobysti09]

Same!

[@yoloyolo5253]

@@scoobysti09 is there any fix?

[@TrailGridPro]

Feel free to reach out to our support email and we'll be happy to help! Our email is [e-mail]!

[@yoloyolo5253]

@@TrailGridPro hey I sent an email 2 weeks ago and still haven’t heard anything

[@ferdinandorotondi621]

Do need a fuse?

[@TrailGridPro]

Nope, you won’t need an additional fuse!

[@jimborambo958]

I’ve been using a cheap eBay dual camera controller for 2 years now with no issues. Cost me $35 for controller, $50 for 2 Natika cameras. Total cost $85.

[@TrailGridPro]

That's so awesome! So glad it's worked well for you!

[@MassDriver]

My 21 has a rubber grommet between the cab and engine bay that is different than the one in the video. And short of drilling a hole, I don’t know how to get through it. Any suggestions?

[@zach5169]

There should be a "nipple" sticking out of the grommet on the engine side. Snip the end off the nipple and feed wires through the hole.

[@TrailGridPro]

Good question! As mentioned below you can use the grommet with the "nipple" if necessary!

[@Malingkat5949]

Hello, I’m thinking of I’ll let you install it on my tacoma. So where are you located?

[@TrailGridPro]

We’re located in Frederick, Maryland!

[@Malingkat5949]

@@TrailGridPro I’m in California. I need to look for someone or somewhere from here who knows on how to install it before purchasing the camera from you. Thanks

[@Malingkat5949]

@@TrailGridPro hello, I think I might try installing it myself. My truck is a 2016 Toyota Tacoma Trd Sport. Do you have an installation video for the year 2016 ?

[@unpocodetodom9586]

Me gusto tu información thank you my friend I ordered my kit from you company

[@TrailGridPro]

Great news! Thank YOU!

[@BobWadeGuitar]

will this work on a 2019 Taco?

[@TrailGridPro]

Yep, it absolutely will! Here’s the product page for your rig: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-14-19-tacoma/

[@BobWadeGuitar]

@@TrailGridPro Thank you!

[@gerkal7757]

@@TrailGridPro Is there an install video for a 2019 Tacoma?

[@TrailGridPro]

@@gerkal7757 install is basically exactly the same! Give us a shout in the shop if you want to ask more specific questions, 301.835.9100. We’re here to help!

[@atitudlanggam3125]

Will this work in 2022 Tacoma?

[@TrailGridPro]

Sure does! Check it out here: trailgridpro.com/shop/accessories/anytime-backup-new-front-camera-kit-20-tacoma/

[@atitudlanggam3125]

@@TrailGridPro thank you! Great video!

[@TrailGridPro]

@@atitudlanggam3125 Absolutely! Thanks for your kind words!

[@fredsausage8794]

Should have disconnected the battery before doing any wiring.

[@TrailGridPro]

Absolutely! Great tip!

[@weeziteer]

Only disconnect the black cable right?

[@donthesheek]

@@weeziteer yes the negative cable.

[@TD-se5lc]

Not sure why you would sell the product if not all pre connected. If it is a Tacoma Kit, 16-19 are all the same. The explanation on the table was ridiculously complicated. A complete waste of time watching that part of the video. Not sure anyone would remember all of connections vs. reading an instruction set. Adding labels to wires like all stereo systems include would make sense if it is not pre-wired.

[@TrailGridPro]

Thanks for your feedback! You can find complete written instructions here: trailgridpro.com/wp-content/uploads/2021/09/Anytime-Backup-Camera-Supporting-Document-2.pdf

[@ronalddimmerling5849]

Would this work with a after market headunit?

[@TrailGridPro]

Great question! We have tested these kits with Sony and Alpine head units running our plug-and-play setup, but haven't tested it with any other brands. Feel free to shoot us an email at [e-mail] for more information!

[@glennschiffer1742]

would it work with a kenwood@@TrailGridPro