toyota tundra door panel removal and speaker replacement install

[@MrJamesgrate]

Awesome install tutorial video bro, you are the only person to address the aftermarket 6X9 speaker installation in the Toyota Tundra's, the window bracket doesn't allow a proper install without a spacer!! Thanks for clarifying that important fact, gonna install some Rockford Fosgate Punch Series into my 2019 Tundra, you made me (Subscribe) to your Channel!!!😇😎💯🤜🤛✌

[@TheTomar33]

This is a great resouce to have. Thanks for making the video.

[@noonespecific9463]

You fixed my electric window problems last night, or gave me needed to knowledge to do so, I’m going to be doing sound stuff next.

[@jptheinstallguy]

go for it bro i believe in you

[@antonilaynez6609]

TIP:‼️ Bro I used the old speaker as a bracket too hold the new speaker, I cut out the old speaker out & the new one fit in just perfect, then I screwed 4 long screws for the speaker to mount itself well to the old speaker bracket & door panel without it touching the glass or the glass pathway as it rolls down then I screwed on the main 4 screws of the old speaker bracket & it worked well. I has some new wires stored away & just stuck the wires into the old harness & blacked taped it together & plug the other end. To the new speaker, That was my way to save some money 😭

[@FourRunnin]

Loved the vid dude, plan on doing my tundra’s doors soon. If you can use a little tripod on the seat or floor, that might help filming the demo aspect and make your own life easier but mad props on that one handed taping 🤙🏼

[@kbsvlog1442]

Question. Do they fix on all four sides or are the rear speakers different size from the front ? I would like to do these speakers all the way around on my tundra

[@noonespecific9463]

Dude, you are becoming my hero!

[@jptheinstallguy]

glad to hear that...lol

[@noonespecific9463]

Test tape? Is that like friction tape? People use different names in different areas , it looked like friction tape and that’s a good idea for using it. I just put my own led tail lights in a stock truck rear bumper. I cut holes in the stock bumper too install protected tail lights inside the bumper made from oval and round 3 function tail lights and ten dual function leds. I lit that thing up like Christmas , I might have to tint those leds they are so bright back there. Using that tape to clean up that mess of wiring it took to do that is a excellent idea. The one handed taping was good, the skills of a KZbinr, holding that camera, most of the time this method , one handed can make things hard to follow, you explain what your doing so well and clear it doesn’t matter here though. Thank you for your content, KZbin basically re did my pick up, well KZbin and 5k in parts and about 1 mil in aggravation factor, lol. I’ve almost got a new 93 f-150 by now, I’ve been over every square inch of it almost now. Almost ready to ride it. Your making these last few electrical things so much easier. Thank you!

[@jptheinstallguy]

thanks for noticing the one handed method...lol but it may be friction tape i think the company name is tesa at least thats whats on the inside of the roll

[@lsohweldfab6575]

What about the tweeter wire with 4 connections???

[@adrianmaldonado4621]

Just what I needed to see 👍🏽

[@justinhudson7705]

Nice work! Thanks for the video!

[@puroparriva1618]

this is the same process for a 2013 tundra?

[@cedrickeys8296]

Can you do a video on the rear doors?

[@jessicacelis69]

Thank you for this explanation , on tundras the magnet will touch the windows rail , because this video I’ll have it right , THANKS

[@lorddracnos]

one handed...you got the like!

[@elishalott8860]

Thanks!!! Great video!

[@bh5697]

Clean install!

[@dogkill7466]

Great! Thanks!

[@pinoceo]

Go check the nissan frontier video, we need help!

[@dawkinss2422]

“Popping off these clips “

[@americandude3825]

That piggy tail plug is a mofo