TP-Link Smart Wi-Fi Light Strip, Multicolor (Tapo L930-5) Review/Unboxing/Setup and Install

[@YorkiesBitsandBobs]

You can use this code ‘YORKB10 at checkout to save 10% off

[@muttley1956]

You should have shown setting up colour segments which is a key feature that differentiates the L930 from other Tapo LED light strips

[@YorkiesBitsandBobs]

thanks for the feedback Muttley, sorry about that, I will do a followup video at some point and add that in

[@LeeTavMusic]

Good vid pal… it says on the box once cut, the excess strip cannot be used… so even if you have those connecting parts (t-connection, right angle etc) these will NOT work right? Thanks

[@YorkiesBitsandBobs]

That's correct you need the pins at the ends to connect too, It can be done but at your own risk kzbin.info/www/bejne/fpzbeImflrShjpY

[@THUNDERSTROKE]

Can we adjust the brightness of each individual effects as well?

[@YorkiesBitsandBobs]

Yes you can

[@evrebel4941]

Thank you for the review. It was very helpful! I wanted to ask if you have noticed any puzzling noise coming from the power supply, especially when changing colors.

[@YorkiesBitsandBobs]

Not that I know of evrebel4941

[@kos25k]

Hello! Can we connect another 5m led strip also as an extension? (With same controller).

[@YorkiesBitsandBobs]

Maybe but it might need more power

[@kos25k]

@@YorkiesBitsandBobs So it doesn't have any kind of connector at the end of the strip right?

[@YorkiesBitsandBobs]

@@kos25k No I don't think so, you can cut the strips and rejoin it but you will need to buy joining connectors

[@YorkiesBitsandBobs]

@@kos25k not as far as I can remember

[@esswhy2076]

I have a problem saving presets. I created a colour painted preset and set 50% brightness. It saves it and if I go back in and check it says 50%. Problem is when I press to activate the preset, it only comes on at 20%. Any ideas why this is?

[@YorkiesBitsandBobs]

Not seen that before, try contacting them directly

[@avp.69]

Do these maintain their on/off state post a power cut sir? And the color/brightness settings?

[@YorkiesBitsandBobs]

I thnk so, Im still using mine

[@chengiskahn2415]

Is it possible to join two 5 metre strips together? If not then can they be synced up on the app

[@YorkiesBitsandBobs]

I think it is possible to join them but I've never tried it

[@User_cc]

How many leds per meter?

[@YorkiesBitsandBobs]

I don't know

[@hudadawood3857]

I have a question before you start connecting there was lighting patters flow that was very good After i finish connecting to app I wasn’t able to find that pattern and flow, could you please help me out in this thanks

[@YorkiesBitsandBobs]

On the effects, screen scroll up the predefined effects and you should have 17 effects there's one called lightning on the left-hand side 3 from the bottom

[@hudadawood3857]

@@YorkiesBitsandBobs I tried that one it’s good But I was looking for the effect on your video at 8:47 when you connected to power first time I was looking for that effect if possible

[@YorkiesBitsandBobs]

@@hudadawood3857 I see, that is only for the Bluetooth setup but You can make your own colour pattern on customized Effects just by moving the small circles to the colour you want and if you only want 2 colours just move the spare two circles over the other circles

[@hudadawood3857]

Thanks so much that was very helpful 👍🏼

[@nakshatrarajesh7908]

Excellent video.. Thank you.. I have a question on extending the length of the light strip.. Could you please tell me, what is the maximum length we can extend this to? I plan to use this in living room and need about 20m of strip. Can I use one and extend or do I need to buy 4? In case I have to use 4, could the 4 be synced?

[@lacifried]

Awesome 👍

[@YorkiesBitsandBobs]

Thanks Noodles for the comment

[@jedpallett2872]

great video

[@YorkiesBitsandBobs]

Glad you enjoyed it @jedpallett2872