Traces of Lines: Concept & Procedure

Download the Manas Patnaik app now: cwcll.on-app.i... This tutorial will give you insights on the concept of traces of lines. This is an advanced topic, yet has been explained in a very simple and lucid manner. Here you will learn to locate horizontal and vertical trace. Once you have understood the concept i am sure that you will be able to solve problems based on traces of lines.
So enjoy the video. If you appreciate the content and presentation in this video do give it a thumbs up.
Link to subscribe:
/ @manaspatnaikofficial
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf

[@rjat__]

sir your teaching method and concept is far far better than our professors

[@Jeorgereddy]

What is meant by distance between the end projectors is 50,reply fast....

[@childplayofficial777]

True 😂

[@shadowking773]

Sir even our proffessors at iit told us to watch youtube for ED and I found your channel far far better than proffessors.

[@rahuls451]

which iit?

[@heheboiii4336]

@@rahuls451 all iits it's the same 😂

[@rajashruthim5451]

Sir really you are an awesome person....I belong to middle class family my father can't afford tuition fees but because of your lectures there is no need if coaching classes or tuition.... The value of your lectures is more to me ....Let god bless you with good health and happy family... Thank you so much Sir 👏👏🙏🙏🙏

[@ManasPatnaikofficial]

All the best Shruthi.... God bless u.... Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@ShivamSingh-vu8vq]

me and so many of my friends from NIT JAMSHEDPUR watch and clear concepts from your channel sir........thankyou so much !

[@ManasPatnaikofficial]

All the best shivam

[@Jeorgereddy]

What is meant by distance between the end projectors is 50,reply fast....

[@pavandattaabbineni41]

I am from an iit sir.....Even our sirs dnt xplain it in such a good way.....thank u sir.....Keep up the gd work......

[@ManasPatnaikofficial]

You are welcome Pavan... Thanks for appreciating the content Do watch all the videos on drawing and mechanics...... And also let your your friends know about this Channel so that they can also benefit.......

[@Official-tk3nc]

I am from NIT sir you are teaching better than our professors

[@ManasPatnaikofficial]

Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Projection of Point: kzbin.info/www/bejne/nHyXmWidgpxmrZo 3. Projection of Line: OLD: kzbin.info/aero/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: kzbin.info/www/bejne/pquoYXdjfs-rmpY 4. Projection of Plane: kzbin.info/aero/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: kzbin.info/aero/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: kzbin.info/aero/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: kzbin.info/aero/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: kzbin.info/aero/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: kzbin.info/aero/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: kzbin.info/aero/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: kzbin.info/aero/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: kzbin.info/aero/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: kzbin.info/aero/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: kzbin.info/aero/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: kzbin.info/aero/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: kzbin.info/aero/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: kzbin.info/aero/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: kzbin.info/aero/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: kzbin.info/aero/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: kzbin.info/aero/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC 8. Development of Surfaces in Hindi: kzbin.info/www/bejne/bqLThaeXibiXeKM

[@susgram_13]

Thanku soooo much sir.... I was searching a lott throughout..... Finally i found the absolute one ..now i understood to draw traces..well....thank god😄😄😄

[@ManasPatnaikofficial]

Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@saibabuinukonda9745]

Hii

[@sreekumar7177]

@@ManasPatnaikofficial , sir could you please send the mail to send doubted questions to you????...... Please......

[@harshitasingh2526]

Your explanation is next level !! Thank you for making this video 🙂

[@tushxrm2468]

Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject . So blessed You are doing a great job sir ! Respect

[@Primus00709]

i am from iiest and you are far better than our professors

[@rahiabrar8400]

Wish our professors explained such beautifully.

[@hrkalita159]

Dhunia hoise de Banai thaka👍

[@saurabh8020]

I am btech 1st year student in iit and I likes your lectures so much

[@sagarkrish578]

I'm soooooooo much impressed & thankful to U for an simple & clear explanation sir.

[@ManasPatnaikofficial]

"Engineering Drawing / Engineering Graphics LIBRARY" Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Projection of Point: kzbin.info/www/bejne/nHyXmWidgpxmrZo 3. Projection of Line: OLD: kzbin.info/aero/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: kzbin.info/www/bejne/pquoYXdjfs-rmpY 4. Projection of Plane: kzbin.info/aero/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: kzbin.info/aero/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: kzbin.info/aero/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: kzbin.info/aero/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: kzbin.info/aero/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: kzbin.info/aero/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: kzbin.info/aero/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: kzbin.info/aero/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: kzbin.info/aero/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: kzbin.info/aero/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: kzbin.info/aero/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: kzbin.info/aero/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: kzbin.info/aero/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: kzbin.info/aero/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: kzbin.info/aero/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: kzbin.info/aero/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: kzbin.info/aero/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC 8. Development of Surfaces in Hindi: kzbin.info/www/bejne/bqLThaeXibiXeKM -- Manas Patnaik Videopreneur, Teacher and Mechanical Engineer www.manaspatnaik.in kzbin.info

[@farmanAli-cx9ur]

i am master's student your way of explanation is very impressive in kids can understand your lectures. Thanks for sharing your knowledge with us

[@hanupawandwivedi6613]

Sir hats off to you 🤘✌️🎩you are my life line of ed great content and your way of teaching amazing

[@devanshgarg6298]

Sahi bola bhai, manas sir hi pass karvayenge apan ko to😂😂

[@shobhitjain1978]

Amazing work..!!👍✌✌ Understood everything with clarity. Nice explanation. Keep up the good work.👍👍

[@Soofiya02]

Sir can u please put a video on traces of oblique lines🙏 ur videos r really helping me...

[@Amba97]

thank you so much for this video! it was brilliant

[@ManasPatnaikofficial]

Thanks for appreciating my work... Do encourage your friends also to subscribe and learn from this channel..... All the best in life....

[@zahoor_akbar]

Sir! please make a video for the traces of a line that is inclined to both planes

[@Pr24s_yt]

Superb 👍

[@mawi6118]

He is drawing with his hands better than me with a ruler lol

[@ganeshracha5552]

Brilliant way of teaching sir. Very helpful 👍👍👍

[@bideeptaacharya6581]

Thanks a lot Sir for clearly making us understand the concepts...🙂

[@abhishekrs2647]

Hello sir....your classes are so amazing🔥🔥🔥..... It would be better if you could add one more content... That is the midpoint type problem...😁😁😁

[@ManasPatnaikofficial]

It's in this playlist: Level 3 Problem 6 PROJECTION OF LINE | RELOADED | BEST ANIMATIONS: kzbin.info/aero/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu

[@abhishekrs2647]

@@ManasPatnaikofficial oh my god.... didn't expect such a suddenreply sir 😀❤️... Thanks a lot sir..... You are a saviour 🔥... May your channel cross 1 Million subscribers in no time....

[@saratmohan7327]

Superb class sir 👏

[@shanthanurai9621]

Thank u sir. Very good presentation. Helped me clarify my doubts. 👍

[@eseaspirant6993]

u teach like a god.thank u :)

[@ManasPatnaikofficial]

+Ese Aspirant Thanks Aspirant..... Do watch all the content which is in the syllabi of ES....

[@pavansaigrandhi7284]

You are simply awesome sir.Thank you soo much.

[@theerdhalaramesh4185]

Excellent ♥️

[@niveditamishra8709]

Love ur writing sir

[@rameshboradiy6861]

A line AB contains a point C on it such that the ratio of the distance of the CB:AC is 2:1. The end A is 20 mm above H.P. and it is in 1st quadrant. And the other end B is in V.P. The point C is 35 mm above H.P. The line is inclined with the H.P. at an angle 30°. The elevation length of the line AB is 70 mm. Draw the projections of the line AB.

[@rushikeshkawade1333]

great explanation sir.......

[@ManasPatnaikofficial]

Thanks Rushikesh for appreciating my work.... Hope that u enjoyed and learned a lot from this... All the best..... And Rushikesh...Do recommend this channel to your friends also, so that all can learn Engineering Drawing in the best possible way....

[@AkshGandharv]

Awesome 3D presentation....nice work.....😊

[@sarthaksomani4426]

Thank You, Sir. Your videos are of great help!

[@ManasPatnaikofficial]

Sarthak... Thanks for your appreciation and support All the best man.. And do encourage and recommend this channel to your friends...

[@Jeorgereddy]

What is meant by distance between the end projectors is 50,reply fast....

[@sandeeptiwari3655]

Clear ho gaya thank-you you are great sir

[@pkprabha123]

Sir please make a video some problems on traces

[@deepakvlogs6026]

Very Nice explanation Sir, I have enjoyed the session 😊👍👌

[@ManasPatnaikofficial]

Thanks and all the very best

[@samruddhipatil4364]

Thank you sir....It helped a lot...😀

[@ManasPatnaikofficial]

Hi Samruddhi.... Thanks for appreciating my work and do spread a word about this channel among your friends and classmates so that they can also benefit.

[@gadesushanth9262]

great explanation sir its very useful thank you so much

[@ManasPatnaikofficial]

Thanks a lot Sushanth for appreciating the content... Do check out Engineering Mechanics also on my channel page... All the best...Have a great time and CHEERS...

[@bittudangi6742]

Your explaning skill is too good.... Thanks sir..

[@hemabhargavikotha839]

Nice explanation sir.Please upload videos on midpoint problems

[@ManasPatnaikofficial]

Check it out in this playlist.... Level 3 - problem 6 PROJECTION OF LINE | RELOADED | BEST ANIMATIONS: kzbin.info/aero/PLIhUrsYr8yHwEyvIlxf4EDsfoStqk2JMu

[@ravikumarkarukonda6711]

Sir... U made it so simple....

[@fake_tourist]

Thanks, that helped a lot

[@ManasPatnaikofficial]

Shikhin Dahikar You are wlcome shikhin..... All the very best in life......

[@abhishekrai9464]

A 60 mm long line PQ has its end P 20mm above the HP the line is perpendicular to the HP and 40 mm in front of VP draw its projection and locate the trace

[@Army74045]

very good experience sir

[@ManasPatnaikofficial]

Hi Manish........ Keep learning and do let your friends know about this channel so that they can also benefit... All the best.....

[@Army74045]

Manas Patnaik thanks sir

[@anuragkanna2030]

Sir can you tell me “what is the practical application to study traces of lines and projection of straight lines” All are explaining what is there in textbooks, I have doubts and I want to give clarity to my students. Pls give me exact answer Thank you

[@amruthavarshinimavuri4485]

sir, these two cases are same as lines inclined to both the planes. but what makes difference with the traces??

[@kevilynx7419]

Thank u sir❤️

[@harshitsxxd]

Really helpful !

[@ManasPatnaikofficial]

Thanks Harshit Do watch all the content on drawing and mechanics..... And do tell your friends about this channel so that they can also benefit..... All the best

[@prateekmishra6245]

you're awesome. Thank you

[@gorantlarenuka5540]

really nice explanation sir. but how to draw trace if one end is in hp

[@ManasPatnaikofficial]

Thanks for your appreciation and support Renuka... Well to answer your question... If any one point is in HP, that means its point of contact with HP is its horizontal trace.. Such points have their front views as their HT or you can also say its HT will be on xy line All the best.... And do encourage and recommend this channel to your friends...

[@goldenwayeducationalconcep5986]

Hello sir, from the end of the original line. How do we know where A and B will end when you trace them vertically

[@shaikhmunkashif4640]

I think in lucky to your video .thank you

[@aswin4480]

Not expected 😍😍😍

[@shishirmeshram630]

Sir put video on trace of planes like trace of hexagon

[@ManasPatnaikofficial]

ya sure....

[@muralikrishnatangella1466]

your explation is good

[@ManasPatnaikofficial]

Hi Murali... Thanks for appreciating the content Do watch all the videos on drawing and mechanics...... And also let your your friends know about this Channel so that they can also benefit.......

[@bharatdussa6338]

nice explanation. thank u

[@ManasPatnaikofficial]

Bharat......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page..... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@sudikshasoni2686]

Sir plz make video on vernier scale

[@nishantnaman3891]

Ur handwriting is awesome....

[@ManasPatnaikofficial]

Hi Nishant..... Thanks for your lovely comment... All the best....

[@hritikkaushik1764]

Bhai contents to kafi ache he ...but ads bohot aate🙈

[@vidhyapj775]

superb sir

[@rithishapatibandla]

Thank you so much!

[@himanshuverma1151]

Make a video of examples of ht vt questions

[@ManasPatnaikofficial]

Check out part 3: Projection of Lines_Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@sachi-4750]

You r the best

[@ManasPatnaikofficial]

Subjectwise Playlist: 1. Engineering Drawing/Graphics (English): kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Engineering Drawing/Graphics (Hindi): kzbin.info/www/bejne/iXObZJaLlqacea8 3. Engineering Mechanics / Applied Mechanics: kzbin.info/www/bejne/kGW6f2WQbtSenNU 4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 5. Theory of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M 6. Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU 7. Engineering Drawing for Engineering Services Prelims: kzbin.info/aero/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU 8. Physics for Class 11: kzbin.info/www/bejne/ZpfIm4h5bJ5_kLs 9. Manas Speaks Series: kzbin.info/aero/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0 10. Channel 2 Link: kzbin.info/door/_aqx41HWeOebfL6FqBYU6Q

[@Dr1pclips]

If both line parallel to each how do find its traces other case they perpendicular to each also how to find it

[@savreetkhinda6993]

Please keep it up U r doing a great job 👍👍👍

[@ManasPatnaikofficial]

Hi Savreet........ Thanks for appreciating my work and do spread a word about this channel among your friends and classmates so that they can also benefit.

[@peterfoiasi4320]

very clear explaination!!!..and understandable...great!! how can i understand that the line is parrallel to VP or parallel to HP..i look at the pictorial diagram it views as the line is intersecting the VP (for the first pictorial explaination)..can you explain again sir??

[@trippinwithjay1]

You are a lifesaver sir, thank you :)

[@sravanb5022]

Sir let if the line touches vertical plane and makes some angle with it then it's trace how can we find it sir

[@karancontractor586]

UK WHAT DRAWING WITHOUT PROGRAM IN 3D IS TOUGH AND U DID IT

[@gourikumar4574]

Sir is dat necessary to draw the orthographic rep by drawing the pictorial one im hvng trouble to draw orthographic rep without that

[@aspirantsgateinstituteforc2494]

thankyou sir.these videos are really good and very helpful for ESE prelims

[@ManasPatnaikofficial]

Hi Venkatesh.... Thanks for your appreciation... And very soon i will be uploading objective problems IES prelim exam.... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....

[@aspirantsgateinstituteforc2494]

Manas Patnaik definitely sir.but upload as early as possible

[@harshulgupta1530]

Sir how to make trace for line inclined to both ho and vp

[@dhilipb1915]

Thankyou sir

[@ManasPatnaikofficial]

All the best Dhilip

[@perwezhussain8908]

sir i ve a doubt in this video at H.T..i m getting a problem to understand how it would be h on reference line? on video tarecs of line

[@ManasPatnaikofficial]

+perwez hussain Pervez....brother look....h is just the intersection point of front with xy line or the line where HP meets VP

[@mishra_shiva]

Definitely sir

[@ArJuN-ln6sw]

Oh man u r too gud at this 💕loved it

[@ajaybhamare5646]

I have problem in ques. in which line is inclined to both the planes and the line is in both 1st and 3rd quadrant ...

[@vinayaksaxena5669]

Sir thank u very much!!!!

[@mirgankamukherjee860]

Please put video line inclined to both VP and HP..

[@mishra_shiva]

Thank you sir

[@ManasPatnaikofficial]

+Shivam Mishra You are welcome shivam..... Do watch all the content both from drawing and mechanics..... And do recommend this channel to your friends, classmates and juniors so that they can also benefit......

[@rishu4225]

Sir you have not mentioned which lines we are supposed to draw light and which dark, sometimes it gets really confusing

[@Learningtech372]

very nice

[@ManasPatnaikofficial]

Thank you 1. Engineering Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Mechanics Playlist (OLD): kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 3. Engineering Mechanics Playlist (NEW 2023-2024): kzbin.info/aero/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 4. Mechanics of Solids Playlist: kzbin.info/aero/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 5. Theory of Machines / KOM / DOM Playlist: kzbin.info/aero/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 6. AUTOCAD Playlist: kzbin.info/aero/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 7. Machine Drawing Playlist: kzbin.info/aero/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Channel Page(@manaspatnaikmech) for Playlists on specific topics. Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc

[@Avinashuppada_09]

sir,great explanation.But the problem i was facing is with autocad presentation which in our college we have to do.so please explain the same in autocad if possible.Thanking you.

[@ManasPatnaikofficial]

Well Avinash....As of now i have no plans to recreating the same explanation on autocad... Ya may be later sometime.....

[@nayanbhoye697]

This vedio is ever best Thank you so much Sir

[@ManasPatnaikofficial]

You are welcome Nayan and do share with your friends also....

[@venukasahu9724]

🔥🔥

[@maheshvishwakarma6599]

My confusion now confirm

[@vaishnaviganeshan754]

👍👍👌👌👌

[@ManasPatnaikofficial]

Thanks Vaishnavi....

[@paridhitripathi9978]

Thank you, Sir. Would you please explain trace for a line, inclined to both planes present in 1st and 3rd quadrant?

[@ManasPatnaikofficial]

ya sure i will make a video on that

[@paridhitripathi9978]

Thank you , Sir.

[@udaygodaba6860]

Thanks a lot

[@ManasPatnaikofficial]

Hi Uday......First of all....Thanks for appreciating my work.... I always focus on giving you guys excellent quality free education.... All the best in life and do let your friends know about this channel on drawing and mechanics so that they can also benefit....

[@Journeytoliberation1998]

Thanks sir

[@ManasPatnaikofficial]

Hi Shrijeet..... Thanks for your appreciation... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....

[@ISLAMICSHORT-cm5bc]

YOUR METHOD OF TEACHEAING HAVE NO PARALLEL

[@Jeorgereddy]

What is meant by distance between the end projectors is 50,reply fast....

[@peterfoiasi4320]

Sir is there any tutorial of yours that explain "how to consturct multiview drawing to isometeric view??

[@ManasPatnaikofficial]

you can watch my lectures on Isometric drawing 2d to 3d.... search by "manas patnaik isometric drawings"... i believe thats what u r looking 4.....all the best....

[@ManasPatnaikofficial]

you can watch my lectures on Isometric drawing 2d to 3d.... search by "manas patnaik isometric drawings"... i believe thats what u r looking 4.....all the best....

[@Yana-yp4ii]

How many traces in a regular pentagon

[@lakshmiks1362]

Thank you sir....

[@ManasPatnaikofficial]

Thanks a lot Lakshmi for appreciating the content... Do check out Engineering Mechanics also on my channel page... All the best...Have a great time and CHEERS...

[@Anjali___613]

Is vertical traces exist ???

[@suryasumith8421]

sir,is it possible for a line to have both HT and VT.?please explain

[@ManasPatnaikofficial]

Sumith Surya yes its possible..... when a line is inclined to both HP and VP, its gonna have both HT and VT...... Sumith there are suv problems in level 4 in projection. Do watch it bro...

[@suryasumith8421]

thnq sir

[@mujeebulrehman1998]

Sumith Surya u can check this frm N D Bhat

[@ananthdakoji4709]

👏👏👏👏👏👌👌👌