Tractor Rescue Part 3: Fuel Tank & Injector Removal

[@graveloverlord]

Thanks everyone for watching. I'm glad you can find the project and the discussion entertaining. It's turning out a fun endeavor and I'm more than glad to bring Zanes viewers along for the ride. He puts a lot of work in on these videos and glad to see he's got a great crowd out here cheering him on. Keep being great to each other out there. Like ol' Zane said. This is a journey not a race and I for one am glad to be shareing it with this community. Also my thumbs fine now👍

[@TeamTopKick]

You gonna upload more videos to your channel or you like me and just upload random stuff once in awhile? I just subscribed you your channel.

[@graveloverlord]

@@TeamTopKick I'm going to do a channel revival soon. With regular uploads and builds. Tips and tricks for regular Joe's without the budget for fancy kit. See where it leads me. The issue has never been the will to do something but rather the remember to turn on the camera. Zanes bound and determined to make me record again. Haha. Nice truck BTW.

[@TeamTopKick]

@@graveloverlord Thanks, I purchased a GoPro Black what ever number. The new one, and it's pretty crappy to try to film outside. It just overheats and batteries don't last long enough. I was making a video and had a time lapse and literally half of the footage didn't record cause it overheated and shutdown. Lol. So I didn't get enough footage.

[@graveloverlord]

@@TeamTopKick I also just got 2 new cameras. They should help out a bunch. Once I finish some stuff up I'll refresh the channel.

[@lancehigdon8683]

Y'all been doing damn good keep it up

[@tomfillmore9710]

Good video guys very interesting I had and old 35 Massey back in the late seventies I think the tractor was new in the late fifties or early sixties four cylinder diesel great old tractor when you got it started that was not easy put new glow plugs in once you could be in the hay field in the summer shut it off for lunch and would have to use the glow plugs to get it started but when it started worked great nice old tractor if you didn’t shut it off enjoyed watching I be following a lot to see now you made out take care have a great day

[@HODGEPODGEDODGEGARAGE]

Sounds like my TD6 International High lift! 😂 I have to use the glow plugs on a 70 degree day! Thanks for the view and kind comment Tom 🙂👍 I greatly appreciate that my friend. Hopefully this tractor can run again soon. Take care🔧

[@davem5370]

The best videos are the ones where the videographer actually learns something too. It is way more inspirational than watching the experts do something with ease. Thanks Zane, looking forward to it running.

[@HODGEPODGEDODGEGARAGE]

That's true Dave! I'm glad you feel the same and enjoyed the video. Take care and I'll talk to you later 🙂👍

[@FlatThunder]

I like the pipe wrench / box end wrench puller combo! Sometimes you have to get creative! Thanks for sharing Zane! 👍😁

[@graveloverlord]

Yeah I got 3 of those old flat plumbing wrenches in an old tool box at a yard sale and I love those things they always come in handy.

[@HODGEPODGEDODGEGARAGE]

Oh yeah Andy!! 😁 Sometimes, you just gotta use what you have, and it did the trick! Thanks for stopping by my friend. Hopefully we can get the tractor running soon. Take care and happy wrenching 🙂🔧

[@brianherron5400]

Nice tractor repairs, that's what you need to do after things set for awhile. Have a great day and a good week Zane.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind comment Brian! 😁👍 I hope things are going well for you.

[@markpospichal571]

Good to see the tractor coming along, thanks for keeping us updated.

[@HODGEPODGEDODGEGARAGE]

Thank you for the kind words and also for stopping by Mark! 🙂👍 We're making progress. I think next time it'll start. Take care and be safe out there 🔧

[@3rdcoastobs467]

Nothing better than turning wenches and having a good friend along for the ride. Enjoyed this Zane!

[@HODGEPODGEDODGEGARAGE]

Thanks James!! 😁 I really appreciate you taking the time to tune in. I know things are hectic for you. Yeah, Dustin and I are having a great time learning more about this tractor. Hope you're doing well. Take care and talk to you later 😁🔧

[@billjunking_fool5549]

Nice video You're a diesel mechanic now that garage looks pretty clean to me need a few more project👍

[@HODGEPODGEDODGEGARAGE]

Thanks for stopping by Bill. I hope you and Debbie are doing well and having luck with the new property. Take care 🙂👍

[@andyadelmann3158]

Thorson did make really well made tools for a reasonable price. We had them on our farm back in the day. Great video Zane !🇺🇸

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words Andy. Yeah, they made quality tools that would get the job done 🙂👍 Have a wonderful evening

[@stephenbell8323]

I use to own one of these tractors, exactly the same! At least twice I had same issues with the gears and the method to to fix was the same as you found out about. It was a fantastic little tractor and I wish that I still owned it.

[@HODGEPODGEDODGEGARAGE]

Luckily it's an easy fix 🙂👍 Thanks for stopping by Stephen 🔧🔩

[@pstreetgarage7304]

Hey Zane. Great video and yes it's the journey ! No need for smoke and mirrors. Save that for Hollywood productions. Can t wait to see that tractor fire up

[@HODGEPODGEDODGEGARAGE]

My thoughts exactly Stephan! 😁 We're hoping to get it running soon. Thanks for stopping by my friend 🔧

[@ironman3406]

You fellers will it smoking for sure! Can’t wait to see it pop, there is no better feeling than seeing your work and dedication pay off when that engines fires up! Good luck, I’ll be watching for the next part in the series. Have a great Labor Day weekend Zane

[@HODGEPODGEDODGEGARAGE]

Hey, Thanks Nathan! 😀 That's very true. I'm planning on helping him next weekend so hopefully we can get it running. Thanks for stopping by and I hope you have a great Labor Day weekend as well 🙂👍

[@stacenhartland9777]

Good to see ya Zane. Thxs for the journey!

[@HODGEPODGEDODGEGARAGE]

Good to hear from you Stacen! 😁👍 I'm glad you stopped by. Hopefully things are going well for you in your neck of the woods. Take care 🔧

[@CRRpop]

Valve train looks good, that's huge. Hopefully the injectors and injector pump are workable. Looking forward to part 4! 👍🚜

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words *CRR Pop!* 😁👍 I hope we can get it running soon. Take care 🔧🔩

[@daviddagger1604]

Hi drove this tractor in the sixties in the UK love your videos no every inch of this tractor have fun you won’t break it.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind comment David! 😁👍 We're hoping to have the tractor running soon. 🔧🔩 Take care

[@wes11bravo]

Definitely enjoy this series, Zane. Keep us posted on the progress.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Wes! 😁👍 Will do my friend 🔧

[@TractorSwede]

There are 12v glow plugs called gam101 for Land Rover series 3 2,25 that is connected in parallel like modern glow plugs.. The pig tail 1.7v original glow plugs also fits Land Rover 2.25

[@graveloverlord]

You know what. I just looked those up. I'm gonna do some more investigation but that might be just the thing we need. Thanks man. Good Intel.

[@HODGEPODGEDODGEGARAGE]

Thanks for the information! 😁👍 It's greatly appreciated

[@brianhayes7618]

Good luck these were great old machines. We had one on the farm back in the 70s good luck getting it running

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words Brian. Take care my friend 🙂👍

[@SumterWrecker]

Mr Zane Another awesome video. Thanks for sharing and stay safe

[@HODGEPODGEDODGEGARAGE]

Thanks for stopping by Hal. 🙂👍 It *truly* means a lot! Especially since you've got a business you're running, doing KZbin videos, editing and what personal time you can spare for just yourself. It means the world my friend! Stay safe 🔧

[@brianmaynard7320]

Loving the vids, Zane!! Can't wait to see that tractor I'll and running!! Peace and love my friend!! Be well!!

[@HODGEPODGEDODGEGARAGE]

Thanks as always for the continued support Brian! 😁👍 It means the world to me. Hope you're doing well. Stay out of the *heat* if you can. Peace and love your way! 🔧🔩

[@machinist5828]

It's fun to hear the banter between you guys. You are right about the smoke and mirrors. People have been so programmed by the "reality" shows it's pathetic. I understand that you want to keep the interest up in a show but once syndication with a producer gets involved it becomes entertainment for uninformed people. I like to be entertained but I like topics that I am knowledgeable in to be believable. A show where everything goes as planned? There's a lot of tape on the floor. As always thank you for taking your time to involve us in your day. Until the next video. Cheers Terry

[@HODGEPODGEDODGEGARAGE]

I can't thank you enough for the kind words Terry! 🙂👍 I truly appreciate that. Yeah, those shows start out ok but then they feel the need to make them "more interesting" and stage things. Just like the History Channel does with a lot of their programming now. I hope things are going well in your neck of the woods. Take care my friend 🔧🔩

[@ydocproductions5593]

Great work guys! I know I’ve said it before but you make a great team. Such a cool project to wrench on and it was good to see it turn over without any trouble. I think it has a lot of potential and can’t wait to see it driving around again😀👍! Take care Zane!

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Cody!! 😁👍 It really means a lot my friend. He's a great guy to deal with, that's for sure! I hope things are going well with your "new" truck. Can't wait to see what you've done. Take care 🔧🔩

[@maxnorthouse3992]

Hi Zane. This reminds me of the 7 8N's that i restored. Just take your time and you will get it. You guys are doing a great job. Take my friend.

[@HODGEPODGEDODGEGARAGE]

Oh, wow Max! 😮 You know your way around an 8N by now I'm sure! That's cool! Yeah, we're learning as we go and having fun. Take care and thanks for stopping by 🙂🔧

[@oldamericaniron5767]

Just watched to the end. I liked your comment about a clean work bench, you’ve probably seen there’s no chance of that in my shop. I really liked your comments at the end. They reminded me of what my old friend would say, how do you know if you can do something if you don’t try. And yes, projects can turn into along journey. Keep up the good work.👍

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Geoffrey! Oh yeah, I'm the same way. My work benches can never be clean. I always have something tore apart on them. Take care 🙂

[@scottcroney1703]

"Farmer dustin" aaaeee man of my own words

[@graveloverlord]

Haha. What part of the vid is are you referring to out of curiosity?

[@scottcroney1703]

@@graveloverlord part where you were driving around the john deere and Zane says "farmer Dustin" lol

[@graveloverlord]

Oh yeah. I'd forgot about that because I didn't realize he'd done that till the video came out.

[@CrustyRustysRestoration]

I love a beat old tractor! She looks like she’ll run!! Happy wrenching brother! 🔧 🚜

[@HODGEPODGEDODGEGARAGE]

I'm hoping it'll run soon! 🙂👍 Thanks for stopping by Alex. I hope things are going well for you. Take care and happy wrenching to you too 🔧🔩

[@CrustyRustysRestoration]

@@HODGEPODGEDODGEGARAGE Glad to be here! I can’t miss a video 😃 I know you guys will get her goin soon! Keep ‘em coming!

[@deepbludude4697]

Sweet! Im pulling the PS pump off my 66 MF200. Parts are taking forever to get here. Looking forward to hearing that old girl fire off.

[@HODGEPODGEDODGEGARAGE]

Hey there! 😁 Thanks for the view and kind comment my friend! Yeah, we're hoping to have it running soon. Hopefully parts show up soon for your tractor. Take care and happy wrenching 🔧

[@glennhunter7018]

Good video again my friend you to will get it running again just keep working hard on it my friend keep the good video coming we got a Break in the hot weather today it was pretty good good day outside be safe

[@HODGEPODGEDODGEGARAGE]

I'm glad you got a break in the hot weather. It rained here *but* got hot and humid after that 😵 Thanks for the support my friend. It means the world 🔧🔩

[@geraldhamilton6619]

Hi men I can relate to what your at I do the same nearly every day I am currently working on a ted20 good job keep it up,

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Gerald. Hope your project goes well also. Take care 🔧🔩

[@martinmckendry6244]

You have your gears mixed up, left and forward is reverse , left and back is first if same as my 35x

[@HODGEPODGEDODGEGARAGE]

It's hard not to get mixed up when the camera is turned on. Lol Happens to me all the time 🙂👍 Take care and I'll talk to you later. Be safe

[@graveloverlord]

Yeah You're correct. I'm pretty sure i was saying what I was looking at rather than what I was doing. Also brain was warm. haha

[@dans_Learning_Curve]

I have the same HF electric impact. Had it since 1991.

[@eirik_halvorsen]

Very nice guys! People pretending to be an expert on everything is getting old. Like you said in the outro; nothing's really that polished that it looks like in TV 📺 .

[@HODGEPODGEDODGEGARAGE]

Very true Eirik! 😀 I'm glad to feel the same way. I appreciate you stopping by. Hopefully you're doing well!

[@DharmendraKumar-uv9ee]

This tractor Old is gold brather

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words 😃👍 Take care

[@thecollectoronthecorner7061]

Looks like you all got it on a downhill run. It will be a handy tractor when you all get it going.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words Randy! 😁👍 I appreciate you stopping by. Have a great week and stay out of the heat! 🥵

[@xozindustries7451]

Some hard work will really be worth it getting that old tractor running

[@HODGEPODGEDODGEGARAGE]

Very true my friend! 🙂👍 I appreciate the view and kind comment. Hopefully in the next video, it'll be running. Take care 🔧

[@tractorman4461]

I saw you over on the Collector On The Corner with Randy and Debbie. Hey man, this was a good video with your buddys MF 35 diesel. You two did real good on it. I work on a lot of stuff that I don't know much about....LOL But its all good though. I've got way too many projects but hack away every day.... I'll have to tune in and see the end results. Thanks and have a great evening Zane.

[@HODGEPODGEDODGEGARAGE]

Hey there! 😁👍 Randy and Debbie are good people! That's for sure! I appreciate you stopping by. I will have to check your channel out too! 🙂🔧

[@tractorman4461]

@@HODGEPODGEDODGEGARAGE I get a kick outta Debbie getting on him all the time.

[@HODGEPODGEDODGEGARAGE]

@@tractorman4461 same here! 🤣

[@TeamTopKick]

Can't wait to see the ole girl running.

[@HODGEPODGEDODGEGARAGE]

Thanks!! 😁👍 We're hoping to have the tractor running soon. I appreciate the kind words and happy wrenching! 🔧🔩

[@kylebass4635]

Dustin and you will get it running. When my grandpa was alive he had Diamond Speck ratchet sets that worked great. After he passed his brother and law got them because he lived next door. Unfortunately he ended up getting dementia and gave them away to someone and could not remember who it was before he passed away in 2012.

[@HODGEPODGEDODGEGARAGE]

Oh, That's sad Kyle! 😔 I wish you could have got them. I know you would have took good care of the set. We are hoping to get the tractor running soon. Dustin is going to get things gathered for a compression test. We'll see. Take care my friend and thanks for tuning in 🙂👍

[@kylebass4635]

@@HODGEPODGEDODGEGARAGE your welcome. Yeah it was a sad situation. By the time we realized it he had given a lot of things away.

[@HODGEPODGEDODGEGARAGE]

@@kylebass4635 Oh, that's even worse because some probably were just taking advantage 😔 I'm sorry to hear that.

[@kylebass4635]

@@HODGEPODGEDODGEGARAGE I know for a fact they were taking advantage of him. Sorry people in this world.

[@HODGEPODGEDODGEGARAGE]

@@kylebass4635 thats sad but very true. Some people should be ashamed 😔

[@markc5593]

Enjoyed the video.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words and for stopping by Mark! I greatly appreciate that. Take care 🙂👍

[@LadyStrzygaPenitentialCell]

Great my dear friend. Warm greetings 🤩 🔥 👍

[@HODGEPODGEDODGEGARAGE]

Hey, thanks for the kind comment and for stopping by. Take care 🙂👍

[@johnnyholland8765]

I think that tractor has the Perkins engine in it. Simple to work on. Think I would have those injectors cleaned and tested. Make sure they atomize the fuel properly. Make sure you put new copper seals on them when you reinstall them. Any diesel injection shop can do them. Those are fine garden and small job tractors. Good for mowing etc. Also check for water in the trans. and rear end if it has been sitting in the weather for a long time.

[@HODGEPODGEDODGEGARAGE]

Thanks for the suggestions Johnny! 🙂👍 Dustin and I both appreciate that. Luckily there was no water in the transmission *but* it was almost empty. Hardly any fluid. We will check it over good before it's ever driven. Take care and thanks for stopping by 🔧🔩

[@graveloverlord]

Everything I've looked up on it so far points it to being the standard. Or at least that's what all the parts line up with so far.

[@dans_Learning_Curve]

Hey, good to see another video!

[@HODGEPODGEDODGEGARAGE]

Thanks Dan 😁 I appreciate you stopping by

[@Wolfhound327]

Love watching these videos!

[@HODGEPODGEDODGEGARAGE]

Thanks for tuning in James 😁👍 I'm glad you enjoyed the video my friend. Take care

[@martinmckendry6244]

23c engine same as fe35 4 cylinder? Not easy started unless set up just right although you are on a winner with export head with heater plugs. Vintage tractor engineer did a great dvd on 23c rebuild

[@HODGEPODGEDODGEGARAGE]

I will have to look that up Martin 🙂 Thanks for the view and kind words. Take care

[@R.Sole88109]

Remember mate, if you're gonna work on old vehicles it helps if you're InZane in the Membrane🤪🤘🏻 Feel free to use that for a T-shirt idea👍🏻😄

[@HODGEPODGEDODGEGARAGE]

LOL!! 🤣 They say I'm Inzane at work and call me *"Captain InZANEo"* 😂 That's a good idea for a shirt though! Thanks for the funny comment and for stopping by. Take care 🙂👍

[@nathanhawkins4108]

As always very good

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Nathan! 🙂👍 I hope you had a great weekend

[@PapaJ5667]

Zane anytime you find model kits at a decent price ...you better grab'em up they are getting expensive ......i got back into building in 2019 after my first hip surgery nos kits are outragous bit you can find them dirt cheap if ypur lucky

[@HODGEPODGEDODGEGARAGE]

Oh yeah, I think the re-salers are what ruined cheap kit prices. I try to buy them if they are reasonable 🙂👍 I would LOVE to get back into building kits again soon. Thanks for swinging by James and have a wonderful evening 🔧🔩

[@adnanchadhar8329]

Good work

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words. Take care 🔧

[@jolj1]

I want to see it run!

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words! 🙂👍 We worked on the tractor last weekend, just haven't edited the video yet. Take care

[@bigghoss762]

I used to have a Ratchet similar to that Thorson, might have even been the same model but I can't remember but it did have the same method of changing directions and everything. One of those things you pick up along the way randomly. Luckily most of my tools were like that, cheap or free because they got stolen out of the back of my Blazer a while back.

[@HODGEPODGEDODGEGARAGE]

Oh!! 😣 I'm sorry you had them stolen!! Almost nothing is worse than a thief! I appreciate you stopping by Harvey. I hope you can find replacements soon.

[@bigghoss762]

@@HODGEPODGEDODGEGARAGE I replaced most of the stuff a while ago when Lowes was having a Christmas sale.

[@graveloverlord]

I've got the whole set. Got at an auction pretty sure

[@HODGEPODGEDODGEGARAGE]

@@bigghoss762 Oh good. I'm glad you got them replaced 🙂👍 It's always difficult to fix anything with limited tools

[@MrJekepler55]

on you pump look for the G on it and use a 1/4bolt in the flywheel to time it if not it will run but not that great I hope this helps you most of the parts you can get from England and All State Ag and broken tractor

[@HODGEPODGEDODGEGARAGE]

Thanks for the information on pump timing Julian. 🙂👍 Much appreciated my friend. Glad you stopped by an take care 🔧

[@dans_Learning_Curve]

Must be nice working with someone. I'm sure things are a bit easier.

[@HODGEPODGEDODGEGARAGE]

That's for sure Dan! 🙂👍 Take care

[@dans_Learning_Curve]

Is Dustin's channel linked somewhere?

[@HODGEPODGEDODGEGARAGE]

I'll see if he posts a comment. I'll pin it then 🙂👍

[@derekdickins7256]

23C diesel engine made in England by the Standard Motor Company.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind comment Derek 🙂👍 Take care 🔧

[@chadbarnard3443]

Before you did all the stuff you did, you probably should’ve just tried to prime it really well with some fresh fuel, probably not even fresh fuel… Probably would’ve fired up anyway. I have a 62MF 35 with a three cylinder Perkins diesel she’s a beaut.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and reply. It may have fired up that way 🔧🔩

[@TheUltimate65]

The glowsystem on 3.152 perkings ,was much better, heatet diesel in a glowplug, works every time...

[@HODGEPODGEDODGEGARAGE]

That sounds way better for sure! I appreciate the view and comment 🙂👍 Hope life's treating you well. Take care

[@dans_Learning_Curve]

May I post a link to my latest video?

[@HODGEPODGEDODGEGARAGE]

Sure Dan, go ahead 🙂👍

[@dans_Learning_Curve]

Spotless table = suspicious!

[@HODGEPODGEDODGEGARAGE]

Oh yeah Dan!! 😂

[@127ynot]

Is the Sierra an xr4i ?

[@HODGEPODGEDODGEGARAGE]

Oh, I'm not 100% sure on that. I'll have to ask Dustin. Thanks for stopping by 🙂👍

[@williammorgan7176]

That hurt finger nail will stop hurting if you soak it in desiel fuel

[@HODGEPODGEDODGEGARAGE]

Very true William! 😂 Thanks for stopping by 🔧

[@kurtzimmerman1637]

what happened to old croney garage? anyone know? he disappeared

[@HODGEPODGEDODGEGARAGE]

He took a break from KZbin Kurt. He's still around here in the comments most times. Take care 🙂👍

[@kurtzimmerman1637]

@@HODGEPODGEDODGEGARAGE thanks. have a good day! miss chatting with him. cool dude.

[@michaelhartloff3833]

Wassup Zane

[@HODGEPODGEDODGEGARAGE]

Hey Mike! How are ya? 😁

[@MrJekepler55]

that Engine is called a STD Engine or a 23C you can get some parts in the states and the hard to find will be in England Agrline is the one I use in England All State in the USA and Relable in the USA and Broken Tractor Engine rebuild kits they are about everywere in England it will be under Ferguson FE35 STD Diesel or 23C Injection pump can be rebuilt their is a place in Orlando that can rebuild them and the injectors as well Accurite Diesel on Divison ST

[@HODGEPODGEDODGEGARAGE]

Thank you for the view and the information Julian! 🙂👍 Much appreciated my friend. I will be sure to relay the information to Dustin. Take care and be safe 🔧🔩

[@scottcroney1703]

Dumb question. Does Mr Zane have tiktok? Lol

[@HODGEPODGEDODGEGARAGE]

No way Scott! 😂 That platform rots your brain LOL

[@scottcroney1703]

@@HODGEPODGEDODGEGARAGE dangit I just got it 🤣

[@HODGEPODGEDODGEGARAGE]

@@scottcroney1703 lol!!! 😁🤣

[@scottcroney1703]

@@HODGEPODGEDODGEGARAGE but if you ever do. Lemme know 😉

[@HODGEPODGEDODGEGARAGE]

@@scottcroney1703 Will do buddy! Hope all is well with you

[@scottcroney1703]

I was watching girls dance to Britney spears when I got the notification for this video. So uuuhhhhh......... yall caught me?

[@HODGEPODGEDODGEGARAGE]

Don't let me interrupt! 😳 LOL!! 😂

[@scottcroney1703]

@@HODGEPODGEDODGEGARAGE if I put on a mini skirt and started dancing I wonder how many views I'd get 🤔 I mean I recorded a video of a box fan and got 789 views

[@scottcroney1703]

@@HODGEPODGEDODGEGARAGE I'm working on a chevy so the skirt is almost mandatory right?

[@HODGEPODGEDODGEGARAGE]

@@scottcroney1703 Nothing wrong with GM. Wear what ya want! 🤣

[@tinoswrld]

Hey Scott say cheese 😁📸 you have been caught in 4K

[@jaratt85]

You forgot the flannel and bibbies, or just bibbies and now shirt in that heat, another option being plaid cotton button up shirts like cowboys/rednecks/my late grandpa wear.. I know it's gonna fight you. Zane, because you put it in here I have to test your knowledge.. What is the "which way did he go George, which way did he go?/I will name him George and he will by my friend and I will pet him and hug him and love him..." a reference to? :P BTW don't you miss when Looney Tunes/Merry Melodies was good? I hate how much modern TV had ruined all the great shows and characters. (like how they ruined Duck Tales and Toucan Sam etc) BTW, it's been about 105-107 here the past couple days. Right now at 1:11 AM it's 73 and 50% humidity. Use WD40 instead of ether on old diesels so you don't blow a hole in the piston.. like someone that really didn't like me did to his VW pickup in high school. Diesel injectors make the best flame throwers.. this isn't the best video, Stacey David showed it much better on Trucks back in the day but.. kzbin.info/www/bejne/rnrIhHmvhslnrrs

[@graveloverlord]

Willoughby originally I think. But it was used in a multiple of cartoon sets. The second time Zane uses it was from a Sylvester cartoon. The big cat in it I believe.

[@jaratt85]

@@graveloverlord but that's not what the cartoons are referencing.. I'll give one hint, the author was from Salinas California.

[@graveloverlord]

@@jaratt85 oh yeah I'm only familiar with the cartoon references. Haha.

[@graveloverlord]

Oh are you talking of mice and men?

[@jaratt85]

@@graveloverlord yep, George and Lenny. That's what all of the cartoons are referencing.