Loading Price Gun Labels into an MX5500-EOS Price Gun

[@George-Francis]

I have a masters degree in engineering but still have to watch this video 3 times every single time I change the roll

[@EnchantedJewelzEmpire]

😅😅lol

[@stefaniach5208]

I'm in my last year of university as an engineer as well and i still couldn't figure this out for my part time job dude

[@stagey12]

🤣 same shit

[@rcranch3838]

I designed this thing and I can’t figure it out…

[@sekinatowoseni7714]

This is most stupid labeller i have ever bought in my life. Wasting of money

[@Baldcafe]

When you unintentionally make the most useful content in the world

[@ElijahCDiala]

Brooooooi you got that right!

[@monaperey1219]

14year old video and you saved my life. Been trying to refill this for hours 🤣

[@sacredtemmielb]

my coworker and I were fiddling with this for like 5-10 minutes so I’m really glad this video exists tysm 🙏

[@solorca30]

I spent at least an hour on this damn thing. I still had to watch the video about a dozen times because I am apparently terrible at things like this, but thankfully this video saved me from throwing this thing through a wall.

[@Leelee-bd8gr]

Thank God for this video. ♥ Had 3 grown men trying for hours.😡

[@rongaba4742]

So easy to load... AFTER watching this video in slow motion and pausing it numerous times! Thank you for creating it!!!

[@C-GODPROP3377]

Perfect Instructions! 🥰 The price labeller I have is a HoNGSHEN H2000, but this video helped me so much with loading the labels. The frustration was real.

[@thingsthatwork01201]

I spent 20 minutes screaming at this thing going back and forth around the front spooler, in and out of the slats, etc. I had no idea you just pulled through and shut it. SIMPLE! argh. Good thing I had about 6 loads of stickers so I didn't feel so bad wasting so many with my feeble attempts before I found this video. Thank you so much for posting!

[@baronmarshland3357]

same here lol

[@rubyboy99]

Yup same

[@alonagallego6705]

same same girl hay

[@weinamirandell6485]

Lucky for you got 20m but me 1 hour

[@mizannek2605]

It takes me 30 min before i remember you tube

[@phylliselias]

Thank heaven I thought to look on KZbin before going out and chucking this in the bin! It has been driving me nuts, but thanks so much for being so thoughtful in putting this up. Very much appreciated!

[@wangtommy4331]

useful video! I actually followed the steps and it worked perfectly at work! Boss nearly scolded me but luckily I found out how to do

[@sekinatowoseni7714]

No video on how to change the ink. Most worst labbeller

[@cdlpicker8123]

Thank God we have this video. Even though it is simple I can't seem to remember every time I replace labels.

[@sandrarodriguez-ro1qn]

After 20 minutes trying to fix this, im so glad i watched this video

[@920PC]

NOT ONE DISLIKE... You just saved me from going absolutely nuts. Thank you

[@thetofubean]

Thank you so much! I was just struggling with reloading at work and you saved my life

[@truthbetold2020]

I feel like i got a better chance learning engineering great video

[@hanihazirah2128]

Amazing!!! I was 2-3 videos but this videos make me success to refill on one go! Really great explanation!! Thank you!!

[@bubbahotep5499]

It was more simple than I thought. Thanks.

[@kidliferanger6581]

Honestly this video saved me from going crazy, the video is easy to follow and qell presented.

[@being5743]

Easy to understand tutorial. Figured out easily. Thank you.

[@loganstoots381]

It has been one of those mornings. Thank you for your help

[@jikkuization]

30mins wasted before watching this video which made me complete the thing in 1 min !!! Thanks man

[@buttersmith6685]

Wow…. I wish I could hug ya!!!!!! I watched several videos!!!! Went thru so much tape and ink all over😂 I was feeding the paper over instead of under…. Ur a LIFE SAVER… THANK YOU

[@seehiggs]

Best video on KZbin. Thank you!

[@oliverowen-akroyd6579]

i had been trying to fix this for like an hour 😂😂😂, this helped so much thank you🎉🎉

[@wahibjj9624]

I was breaking my head trying to do that. Thanks for showing us.

[@maplepeach9262]

Pheww,,finally..😄 thanks for the video!..it help me n my mom so much!😆

[@lynnemeek62]

Thank you so much. I need this video every time I change labels!

[@sukaenacornelius9285]

I smashed mine

[@samsaab112]

mee too 😂

[@shona11701]

L0

[@shona11701]

L0

[@krustykrab_pizza]

Me too also 🤣

[@bodazoka1]

Thanks man, also whats the song playing in the background?

[@pearli717]

Took a couple of tries, but I finally got it. Thanks so much.

[@HaythamBuKhadra]

Thank you very much, i was playing with this gun for an hour

[@violetabarola4161]

Thank you. Your video of loading this price gun is a big help to me

[@mr_silentkiller_03]

Bro .... Helped me several times ... 😅😊 Thanx bro ...❤

[@donnafrederick8596]

It took me a week to load it the first time. The 2nd time I thought I had it down pat......NOT,; it took me DAYS to figure it out again!! Am I a moron?? So here I sit, again......(I AM a moron!!!) I dont have a CLUE how to do it, until I watched this...& I will watch it again a month from now. LOL THANK YOU!

[@nilushathenuwara7301]

Finally found the video u saved my life bro i was stuck in to ut 👍👍

[@davekaren8724]

Thanx buddy for the upload 2 hours try it b4 saw ur video appreciate

[@colbygenecco9752]

WOW - can't believe I stumbled across this video so easily when trying to reload our labels!!! Thank you for going *slow*, very concise and easy to understand. Bookmarking this for next time we need to change - Lord knows I won't remember, even with how simple it is 😂 Thank you thank you thank you!!

[@damodarkumar5865]

😎😎😎😎

[@CherylBeck1]

I love this video! It worked right away. I would have never figured it out on my own. LOL

[@KatNicholson]

So grateful for this video, i watch it every darn time i have to swap the roll 😂

[@martinconley3074]

You're my hero! Label master of the universe.

[@truthpoint6167]

Thankkkkk YOUUUUUU! You just saved me so much confusion and time 👏🏾👏🏾👏🏾🔥🔥🔥🔥🔥🔥🔥

[@jlsuitt]

Thank you so much! The picture on the box was horrible, and this explained it very easily.

[@TheUPSStore-hs9ez]

OMG!!!!!!! It was so simple! Thank you!!

[@shinobipanda2331]

Thank you! Helped me a ton at work.

[@1of99sheep]

I gave up after 2 hours and 5 days later I KZbin it and I’m so mad I can’t get that time back now lol 😂 thanks for the help

[@kungarangrick6033]

It was a helpful and a new lesson so thank you.

[@clarabusomsherms8493]

the best tutorial! tHANKS SO MUCH !

[@ashalansari]

Thanks for the video! Now it's working great. I'm amazed how the ink cap is still working after over 3yrs not touching it!

[@hxcjeff]

Thanks a bunch. Lost the manuel and needed the instruction! 👍

[@lorealparisfibralogy1976]

I kept thinking it needed to be fed through the black flat piece on the bottom. Is there a way to actually upload this video to my computer so I have it on hand in case you close your account down the road and can no longer view this video? It worked great. :)

[@ezbme]

Oh man, that was so easy! I can show you about 12 other ways to do this too...although non worked! Sheesh... Thanks!

[@zero0867]

Thanks I was trying this about 20 mins

[@veronicachagoya8980]

Gracias ,sin tanto bla bla bla te endendi perfecto eres el mejor!!!! Mil gracias x tu ayuda

[@slowmotion_lovers]

I watched this today and made it well😊❤🙏

[@tinacrystalmaster]

Thanks. Just a suggestion but as the instructions for changing the ink are printed on the gun could you not also print some instructions for changing the roll on there too? I did understand the box but years on no longer have the box but still have the price gun :-)

[@handichick]

Thank goodness I found this. I was seriously getting pissed off trying to figure it out on my own. So easy. Ugh.

[@dereckperkins]

Thank you! I had mine coming out, but the back paper that covers the sticky part was still on it. this showed me what I did wrong.

[@szebasztianvaskovics3281]

Thanks man! You saved my life

[@khairulkhan9092]

Thanks for the videro 😊 You saved my day 👍

[@LizaMusicOfficial]

Thank you so much !!! I've been trying for hours !!! You saved me :)

[@cmai1988]

Thanks a lot! I was in the opinion that i´m stupid to reload this pricegun...but now i´m calm because the video have over 1 Million klicks! ^^

[@closecounsel9099]

Going over instructions for 20 mins..this took 2 mins..Done! Hugs

[@jasminediep5832]

I've spent 2 hours studying it and finally gave in and now I'm watching this

[@dobitdobit9981]

thanks so much...I ve been doing this since day... i am glad i finally got it...cheers BRO.....

[@pyaesoneoo9913]

Very clear and useful video. Thank you 🙏

[@christopherbentley6762]

Wow! This is so much easier than I thought! Thanks so much!

[@charlye3358]

omg thank you so much, it helped me at my job THANK YOU❤️

[@BaidiKahutaVines]

Thanks brother... I am watchin this video in 2022 🤣❤️ Jazakallah allah (god) is greatest

[@uldisvitols]

Paldies!!!! Paldies, draugi par noderīgu video!!!!

[@sophia33167]

Thank you for your help the video was very clear I got it the first time

[@EnchantedJewelzEmpire]

Ugh thank you for this! If had paid attention to how it was when it ran out, instead of just ripping the empty labels out to throw away I wouldn't have been so lost! 🤦🏿‍♀️😂

[@jeffgarryagustin9896]

Thank u so much. Kung di ko to nakita nakakalabad talaga sa ulo.

[@fleurcarpenter6376]

Thank you sir, you saved my day!

[@bigdaddyrips5566]

Excellent video! Thank you

[@chopshop254]

How well do these units work. They are very cheap so I am just wondering about how reliable are they. I know you get what you pay for, but I run a small flea market booth andI am looking at something to price items.

[@MutaleMulenga8ight]

Cant thank you enough for sharing this

[@lakshmanbalakrishnan7402]

The U tube video was good and easy to understand. Thanks. There is smudging of some numbers how do I remove it. Please help.

[@cybercruiser22]

Thanks a lot dude, You saved me from further frustration

[@nothinghere941]

Thanks for the video man appreciate it

[@upinsmokewego59]

I never leave comments but thank you for this?

[@lilsamari]

I should have watched this first. Thank you!

[@SuperFunkymonkey16]

Literally a lifesaver!

[@lowket]

Thank you for sharing this video. Very well done.

[@ajtaz9022]

Thank you - that was very helpful

[@1alphafrau]

Super erklärt!!!! Klasse. und DANKE . übrigens - nette Musik !

[@kishsobrevega7380]

Thou art a god among men

[@Violet1974]

How do you change the ink roller?

[@thecomfortableoutfit2991]

Thanks for saving my machine

[@haiya-jolly]

Thank sir,Very useful video.

[@pritamyadav1717]

खूप छान आणि युट्यूब चे खूप खूप आभार , धन्यवाद.

[@murlivlogs6309]

Thanks a lot.... This become very useful for me...

[@g.pfavore899]

Ho my God, so so educating, thank you so much.

[@dazeerivers9235]

Thank you so much, well done video!!

[@GarbledReverie]

0:50 I noticed you used a roll that says "Best Before" can this same gun do dates? Or does it need a different component for that?

[@finnleybland2301]

Very good, much appreciated

[@maxwithme6862]

so many thanks, it really helps!!!

[@Tknumber1YT]

Thank you cause this saved me a headache

[@simon-le9ey]

I don't know how it got broken or what we did that fixed it but I think this video helped. +1 good youtube

[@sarthakkarode6049]

So nice😊😊

[@Cuddly07]

Hi, my MX-5500 MoTEX label gun has been good until recently, couple of numbers were not printing clear but rest is good. How to fix it? Please help