Wait and trade using Initialize Variable

[@muditsaxena731]

Great addition…..repeating the requests already made (1) want to create the variable at a time of our choosing, (2) want to create the variable basis some condition - e.g. High of previous 5min candle - this is needed to take trade once the price crosses high of a certain candle and that may happen after 3 or 4 or more candles

[@arunbhatt7148]

If I want to initialize the variables at 09:20 can I just initialize them in SET 1 by giving entry condition as time (NSE) >= 09:20 and then use them in other sets.

[@amitavdutta4824]

Same question as Mr. Mohan How do I initialize the variable at 9:20 as market is choppy at 9:15

[@techtrader8434]

Make a empty repair once with condition of your time , and set the runtime

[@rajeshkanulla806]

Please explain

[@arkamitra9779]

Add the option to select the strikes inside the "instrument name" keyword, based on the spot price, or based on the closest premium.

[@marwadijethalal7369]

I also need it

[@uvanantasrinivas7293]

Add a Set number as 0 which will take dummy trades and exit. Then we can use traded Instrument in all calculations and logics in Set 1,2 etc, whichwill be based on the respective PE/CE.

[@saurabhgarg3288]

Thanks For the Video. Does the Initialize Variable get set when its executed first time of the day. or it will be set every time prog runs to check the condition.

[@mohankl783]

Thanks for the video. suppose i want to initialise the variable with a different time say 9:30 AM is it possible? or only we can initialise at 9:15 AM price? If it is not supported can you please add that feature as well?

[@kushalpatel8658]

yes

[@manojmishra9377]

Same question? Any other time can we initialise?

[@gulshan5672]

In advance setting page, keep condition check start time =15mins after exchange open. Then it will capture variable data of 9.30. For 11am, just keep similar start time

[@prabhakarreddybaggidi5511]

@@gulshan5672 Have you tried this logic bro. Is it working.

[@gulshan5672]

@@prabhakarreddybaggidi5511 yes, today I tested. It worked exactly same. Captured Nifty high & low of 930 15min candle at 9.46.

[@arkamitra9779]

How can I get the Instrument Name of ITM/OTM options based on the spot price? Also, I want the corresponding prices to be stored in a variable. With the current method, this is only possible based on future prices. Because the "Instrument Name" keyword does not let you select strikes based on the spot. How to get around this?

[@ven657]

Sma is usualy for close. I want for hlc/3 how to do it ,?

[@9galgos]

Thanks for information

[@rebeckism]

Can you setup this strategy as a free template to your already existing templates

[@vishaljain306]

Really good updation, also create the template 🙏

[@vishupatilmarathi]

what if we need to select price od spot base

[@Sachin-pr8yo]

CAN I USE FIBBONACHI LEVELS VALUES IN INITIALISE VARIABLE?

[@TheAddyconnect]

Round formula is not fetching the same strike as ATM. There is some glitch in the process of Round.

[@arkaroychowdhury702]

sir can we put a stoploss with a value of the previous candle(high-low), where we take the trade?and a target of 1:3

[@salimta1]

I am also looking for this

[@narenkandala1450]

Good Addition. Will this work in Back Test also. Few more to Come... 1. Condition Builder Page should expand to full page..

[@anwesh5501]

Nice update variable we want to set runtime after some calculation please do a video on that

[@fengseamit]

what is the difference between strike name of ce & pe and instrument name of ce & pe, aren't they both the same.

[@mrdev5868]

how to convert the same logic to findout strikes which are trading at around 160 Rs t 9.20 am and sell the option which goes below 10% of 160 ( 144 around ) ? I cant find any option to initialize the variable with find strike option using 'Instrument' keyword. Only 'ATM' option is available. Also we need a code to generate strike variables based on spot price not on future price

[@chennaistockmarket133]

please provide an option to copy the "Initialise variables" and "Run time Variables".. for adding each variable, we need to create as new.. it takes more time.. so please add "copy" option as soon as possible..

[@thileepan87]

Can we use initialise variable to place SL-L order in Entry Condition itself? This is because when we place SL-L order in repair condition it takes 7 - 8 seconds to get the limit order placed in broker terminal after executing the entry condition. Sometimes the price gets skipped before tight SL-L order is placed and the condition enters into error status.

[@TheRamanacv]

Thanq gor new features

[@saurabhgupta10]

i tried setting the strike price fx with ce_strike but it did not work if i replaced with ATM it worked and I can see the ce_strike in runtime data.

[@satsnr]

+1, it does not accept anything apaty from ATM, why cant we use find_strike ?

[@saurabhgupta10]

@@satsnr got the issue check there latest video on trade tron in my case the entry condition was getting squared off hence repair it did not execute

[@calachake1]

In entry condition i want to use chart of CE or PE which have LTP less than 70... as I want to use renko setup which gives best result if strike price of option is near 70.... I don't want to use nifty chart in entry condition.... Pls guide

[@ethinix.]

Need an option to change the time. What if I want to get the ce and pe values at 11am?

[@nilapatro]

+1

[@adityajmfc]

I have created same strategy and deployed it today, what a market today, but has not squared of even points trailed upto more than 100 points. I think there is something wrong. May you pls clarify?

[@mohitmongia99]

In these examples you have taken ATM, I want to select a strike having premium of 150 and want to wait that once it is decreased by 10% I will enter into the trade. I dont see any solution for this as of now

[@heresandyman]

even I want to know how to do this

[@D.O.M.I.N.I.C.A]

thank you...

[@goaunited7060]

how to find stike having premium 100 of ce and pe at a particular time, without placing buy/sell order? similar to checking atm ce/pe price This feature is not available in TT. Kindly add this feature

[@syedzahirhusain336]

Thanks a lot

[@sidnet033]

the strike selected in above is as per future.. not as per strike. How do i capture price of CE/PE as per spot. Example - instead of 43100 it takes the CE/PE of 43300 because future is at 43300 right now

[@SUBHAJIT163]

Only Set NFO , Nifty 50 it will select Spot price

[@akashkad8417]

One update that i m waiting since 3 years. But still not updated.. 🤦‍♂️ TT cant not check option LTP based on index spot in condtion builder. It still can be check only by based on index Future.. Ex. I want to check Call option premium price of 42200 strike if spot is running at 42000. Currently it only possible based on Future price. In this example future might be running at 42100.

[@trustcapitalelayaraja]

Thank you for bringing wait and trade , but the time of recording of variable 0915 is really not useful, i have 2 requests , 1. We should be able to vary the time of recording of wait an trade timings, 2. Instead of ATM if i enter using premium based that is 150 Rs premium strike , it should also record the variable based on premium instead of ATM.

[@niveshalaya]

2. Ans - you may also record the price based on premium, use Find Strike keyword instead of Round ce_strike1 = ( find_strike ( 'NIFTY BANK', tt_expiry_offset ( 'week', '0' ) , 'ltp', tt_Number ( '150' ) , 'CE', 'any' ) )

[@satsnr]

@@niveshalaya I tried but it didnt work, it only accepts ATM (or ATM +/- steps). Has ir worked for you ?

[@mrdev5868]

@@niveshalaya that is to find the strike.. . but what if to compare the price of that selected strike with our desired levels... suppose if I want to select strikes which are trading at 150 rs at 9.20 am, I can use find strike formula to get the strikes.. But how will you create the instrument variable to match the selected strike ? Suppose I want to sell that option if its price goes below 150, then at input section of the strategy builder I should write like this, ltp ( Get Run ( ce ) ) < number ( 150 ) .. but in order to create the variable 'ce' , I only have option for ATM as instrument type , not based on the strike we have chosen. that is the problem

[@vishupatilmarathi]

this is littile confusing . You didnt select ce or pe for strikes. Please make the video what if we need CE and PE near otm prices?

[@kailashchoudhary294]

You test on live market. With multiple entry. Tradetron keywords makes loop. These keywords not allowing multiple entry. Data refresh rate is 1 minute it should be less than 1 second.

[@TheRockstar3050]

I was using it from last 2 months , One day It has shorted deep 500 points ITM option , it was scary , I contacted chat support god's grace they understand the issue within 30 minutes ! and replied a solution after 8 hours .." delete the strategy and redeploy It it's taking 5th July data " and closed the chat .. !!!!!!! scariest solution !

[@mohitmongia99]

In these examples you have taken ATM, I want to select a strike having premium of 150 and want to wait that once it is decreased by 10% I will enter into the trade. I dont see any solution for this as of now

[@arkamitra9779]

Any solution to this yet?