Philips S9986/63 shaver • How to use quick clean

How to use Quick Clean Case and Quick Clean Pod to clean Philips S9986/63 shaver
Price on Amazon: amzn.to/3rYPvS9
More useful things on my website:
www.trafegon.com

[@trafegon]

USEFUL LINKS - LINK UTILI Price on Amazon .com : amzn.to/3lXnJSo Prezzo su Amazon .it : amzn.to/3DRTfHs

[@cheesecrumpets]

Okay, so let's clear a few things up for everyone in the comments section here. The cleaning pods cost about £15.99 on Amazon for a box of three cartridges. Each cartridge will last about a month if you shave and clean once per day, or it'll last about 3 months if you shave and clean your shaver once a week. So effectively, 9 months of cleaning will cost £15.99, which isn't too bad at all. Each cartridge is effective for upto 30-cleaning cycles. After each shave, you would be best to rinse the shaver/blades off in warm water to get rid of hairs, or brush out with the little brush usually provided in the box. After this, you would place the shaver in the cleaning pod for one minute. Once cleaning is complete, you can leave your shaver in the cleaning pod until it air-dries naturally. Then, once dry after an hour or so, you can either place shaver back on the charging stand or store in its zip case. The cleaning agent in the pods leaves your shaver x10 cleaner than using water alone, according to Philips. The cleaning formula includes active lubricants to keep your blades in good condition for a longer period of time. The cleaning agent also has a fresh fragrance and is alcohol free. It also prevents 99.9% of bacteria growth from hairs and skin-oils. I hope this clears a few of the questions.

[@angziheng6424]

you r the best

[@davidfromdownunder]

Thanks for the detailed comment to clear up any questions

[@stefans.6858]

I wash the head with hot water and then I use the cleansing mode every two days or so for giving it a nice smell.

[@vedder10]

Thank you for the video. Really like how you kept it simple and just showed what it could do.

[@trafegon]

Thanks to you for watching 😉

[@mayoloing]

This video is awesome. Haven't had the courage to open the cleaning pod before watching this video. Thanks a lot for sharing!

[@rudrakumar519]

you have shown simply Practical way of cleaning the shaver head. well done

[@hobbyadventurer583]

Great job showing how to use the cleaner,nice and simple ! Good video that you did.Saved me a lot of time to fig it out.

[@trafegon]

Glad I was helpful, thanks for watching! ;-)

[@ralphm9365]

Good job with the video. I wasn't sure first time I tried to open the lit of the cartridge if I'm doing the right way as it needed much more force to open than I expected. I'm always happy for that kind of videos, thank you very much.

[@trafegon]

Thanks, I'm happy to have been helpful to you ;-)

[@timur5127]

Dankeschön, hat mir Zeit gespart das anderweitig herauszufinden

[@rickcrane5089]

Thank you for the video. I had a little trouble lining the shaver with the cleaner up front. But then, it worked fine.

[@trafegon]

Thanks to you for watching! ;-)

[@garrickleppinger7279]

Loved the video, much better than trying to figure out the booklet

[@trafegon]

Thank you! I'm happy to have been helpful!

[@19mastedan54]

That was very helpful...compared to the instructions that came with the shaver......thanks....✌️👍😎

[@trafegon]

Thanks to you for watching 😉

[@user-pp1ij6pw1e]

It's an awesome video and extremely useful. Thanks for sharing!

[@trafegon]

Thanks to you for watching!

[@gpm169]

Cool demonstration and cool soundtrack. I have always flipped the head mount and rinsed most if not all the observable whisker hair away before cleaning in the fluid, Thanks for the reassurance and guidance. Isn't it a good idea to have another pod ( if you can afford it £26 Gbp approx with shipping) without cleaning fluid in it and store the shaver kinda upside down on bathroom mirror shelf ?

[@arnieabbasi]

hi there,thanks for the video ,just wondering how can i put facial brush on it

[@maril1379]

Thanks much better than written instructions Thumbs up.

[@trafegon]

Thank you for watching! ;-)

[@rosiengym2417]

Thanks for this as I found the boxed instructions unclear! Do you know if you can you leave the cleaning fluid in the pod set up or do you have to remove and dry after each use please?

[@paularmstrong4928]

Hi Thanks , should you clean out with wee brush cleaner first ?

[@Namesoom]

Hi, do you know if any of the nose hair trimmer attachments work with this shaver model?

[@angeladonohoe4962]

Watching Yr video is easier than scanning the q r code's

[@giheldy4414]

Very interesting. How do you know when you have to change the blue liquid? when there is still enough? Thank you

[@tomaszkulig97]

do i need to close the cartridge after cleaning ? bought it few days ago and not sure if it can stay open, won't it evaporate ?

[@obiwanjonton]

Thank you for posting this. It made it all a lot easier, the information in the booklet is quite poor.

[@trafegon]

Thanks to you for watching!

[@josemanuelabreu4043]

Bem explícito, gostei . Só falta eu saber quantas vezes posso utilizar o mesmo liquido de limpeza. Obrigado

[@Mordraqq]

Thanks for the Video mate!

[@trafegon]

Thanks to you for watching! ;-)

[@timothyryan9441]

Thanks bro had no clue how that worked!

[@bennylloyd-willner9667]

That's how life is nowadays, even more than yesteryear. NEVER look in the manual provided, nor check the PDF online - just wait for a KZbin video 😁

[@ollienilson1644]

Very good video that you do. Just bay 9000 series and this video help me to clean it. Thank you.

[@trafegon]

Thanks to you for watching 😉

[@AlanD96]

I have the cleaner case, and there's a tiny window at the top. I have no idea what it's for. I would imagine it would be to tell you how much cleaning solution is left in the case but I can't see the solution inside. In fact, I had run out of solution and there was no indication except the shaver remained dirty. I guess it's easier to just unscrew the top and look that way. Thanks for the video.

[@bennylloyd-willner9667]

According to the manual (yes, I am a man and still read the manual😁), the window is supposed to show an "empty" icon in black on a white background when it is low.

[@keithmuffty3501]

Awesome Demo....

[@amirprog]

More useful video would be: How to make homemade cleaning liquid

[@bennylloyd-willner9667]

I think you should be thankful for the video, if you want something else then search for it. Or at least don't be negative😁

[@davidmacmillan616]

Great informative video. Thanks.

[@trafegon]

Thanks to you for watching!

[@halbestcanada2305]

Nicely done. How often does the cleaning liquid needs to be replaced and do you have any idea how much it will cost? Moreover, can you clean it with warm tap water?

[@trafegon]

It depends on how many times you use the razor, I change it every 3 months because I use it about once a week

[@Yeniceri_1453]

Hi, one question... Do you leave the cartridge in the cleaning pod after cleaning your razor or do you take it out of the cleaning pod and close it with the lid until the next use?

[@trafegon]

I leave the razor in the cleaning capsule until it is completely dry, then I put it in its charging base

[@johnstirling571]

Well made video. Straight to the point.

[@trafegon]

Thanks for watching ;-)

[@valeriobarone]

Does it work for the S5000?

[@davidkeane1820]

Very helpful thanks for posting

[@trafegon]

Thank you!

[@WAZZINUK]

This is a great video, thank you

[@trafegon]

Thanks to you for watching! ;-)

[@joehamilton7950]

Will the Quick Clean Pod work with my Philips Norelco 9400 (S9502/83) shaver?

[@bennylloyd-willner9667]

I am more curious than you perhaps, so I googled your model quickly. It doesn't seem to have the hole for the driving pin in the pod that makes the fluid pump around. It also doesn't mention Cleaning Pod in the product description on Philip's website. So probably not.

[@StickyGeko]

think on the app it shows you rinse the excess off first before using the pod cleaner

[@lordthranduil4832]

Nice video tnx for help 😊😊

[@trafegon]

Thanks to you for watching 😉

[@walterdevries1292]

great video...how long does the cleaning liquid last? cheers

[@trafegon]

Thanks for watching. 1 month

[@martinbulstein2411]

Hola buenas noches. Donde puedo comprar esa máquina afeitadora Philips acá en Argentina? Gracias 👍

[@JorgeLuis-xi9tz]

en mercadolibre la compre

[@carmenrodriguezdominguez2750]

Para cuantos usos es ese líquido para limpiarla ? Porque hay se queda la barba ? Gracias

[@danya8958]

para unos 9 o 10, pero puedes cambiar el líquido por alcohol isopropílico al 70%, lo venden en casi cualquier farmacia

[@tomraukura]

Would it be recommended to leave the shaver in the pod as a storage station when not using? Or best to take it out and store separately?

[@voiceofreason9238]

REDACTED - You can store the shaver separately. Also it fits neatly upright into a toilet paper roll or just lay it on its side.

[@seanogorman3617]

@@voiceofreason9238 why not leave in pod ?

[@voiceofreason9238]

@@seanogorman3617 I changed an earlier answer that I got wrong, You CAN leave it in its pod. Once you put the shaver in the pod the shaver itself churns the cleaning fluid. After about a minute it shuts itself off and the liquid returns to the pod with the shaver above the fluid.

[@seanogorman3617]

@@voiceofreason9238 thank you

[@rickcrane5089]

Thanks!

[@PetreCorondan]

Thank you, very good.

[@trafegon]

Thankks to you for watching ;-)

[@joenegrete8925]

is this for any philips shaver? or only certain models? thanks

[@xingniko3338]

for some newer model only, u can search the compability

[@hans1559]

It comes with the cleaning fluid? And how often has the fluid be renewed?

[@voiceofreason9238]

Yes the shaver and cleaning pod comes with your first container of cleaning fluid. If you shave once per month then replace the entire container with a new one every three months. It's disposable quick and easy.

[@zuverlass3629]

Thank you!!!

[@trafegon]

Thanks to you for watching! 😉

[@vitaliyastakhov9687]

Thenks man🙂

[@trafegon]

Thanks to you for watching!

[@18Damianz]

Is it possible to only use water? Instead of their cleaning liquid?

[@user-oo8zt1sc1c]

You can wash it with water, but this liquid helps lubricate the device blades.

[@LTV249]

I always rinse the head with water before doing a full clean. My cleaning system is much different then this one. The one I have takes about 4 hours to clean and dry 🤔

[@chrishalle1982]

How good does it clean when you use shaving gel?

[@bennylloyd-willner9667]

I would suggest rinsing it in hot water first. That will also prolong the life of the (pretty expensive) cleaning liquid.

[@toremagnuspettersson5883]

But...? Good video! But what do I do when I am going away for 6 month tomorrow... Am I supposed to just leave the liquid in there...? Will it stay inside even on a flightrip?

[@vito1785]

No it will not stay inside. It leaks if you just tilt the thing. You will need to purchase new pods, and don't open them unit you arive. If you are leaving for 6 months, unless you only use the clean cycle once a week, you will need to bring more then 1 pod.

[@kas9633]

@@vito1785 it is easier to close it. Lol

[@redhunter1535]

But it doesn't seems to have the dry system. Isn't going to be wet the next day you use it?

[@user-oo8zt1sc1c]

It doesn't matter, the liquid is also lubricant

[@user-kanonon]

Thinking about buying one ! Can this RGB light turn off when it working on?

[@trafegon]

Thanks to you for watching, I don't think it's possible to turn off leds.

[@bennylloyd-willner9667]

It can be selected how it works via the menu on the shaver. It can be set to three different modes: 1) Full feedback (pressure too low-blue, pressure correct-green, pressure too high-orange) 2) Part feedback (only pressure too high-orange) 3) No feedback (no light) Edit: I only know how the 9000 series 9987/59 works, which may be different from other models. Edit 2: I can actually only turn it fully on or fully off on my shaver, while the manual says 3 modes. Edit 3 (😂) You can select any of the three modes in the GroomTribe App

[@user-kanonon]

@@bennylloyd-willner9667 THX!! I've bought S9950 ! very nice :)

[@petermulheron9000]

Works well

[@Ficklid]

I like this video! Very informative. I rinse the stubble out first, shake off excess water, then do the cleaning. Then I place the shaver on the charging stand. I also put the pod cartridge cover over the quick clean pod to reduce evaporation since I only do a clean once a week. Is this necessary? Will the liquid evaporate if I don't store the razor on the pod or don't put the pod cartridge cover over the cleaning pod?

[@colinrevell7649]

Brilliant video thanks. Better than Philips instructions! Thanks for sharing.

[@trafegon]

Thanks to you for watching 😉

[@JorgeLuis-xi9tz]

comparto no se entiende las ecplicaciones de philips

[@robertmenghini.Lambomad]

Brilliant thanks, just bought the same shaver today! The booklet that comes with it is absolute crap!

[@trafegon]

Glad I was helpful. Thanks to you for watching! ;-)

[@christianroy7148]

Super ! Thanks

[@trafegon]

Thanks to you for watching! ;-)

[@gimigimi1299]

Next video please take out the blades so we can see how clean they are inside. I have a feeling, anything over 3mm is stuck inside..or?

[@henriforestier7408]

Why is there an outlet to plug in on the cleaner itself?

[@bennylloyd-willner9667]

There isn't any on my pod. edit: Or do you mean the driveshaft that goes into the center of the razor? If so, that is for driving the pump so the liquid flush the head fully.

[@philader6206]

TY !

[@trafegon]

Thanks to you for watching 😉

[@christopheoury4773]

Merci pour votre démonstration

[@trafegon]

Thanks to you for watching, glad I have been helpful 😊

[@Sysshad]

After its been cleaned, can you leave it in the cleaning station, or do you have to pick it out afterwards? I wouldn't want this if i have to wait for the cleaning to complete and then pick it out :)

[@sweetvuvuzela4634]

Take out let it dry

[@Sysshad]

@@sweetvuvuzela4634 thx for reply, but found answer elsewhere. Seems you can just leave it there to dry :)

[@sweetvuvuzela4634]

@@Sysshad maybe model dependent philips manual for the 5000 says let it air dry before storing

[@voiceofreason9238]

@@Sysshad The shaver may be left there to dry. (EDITED due to my previously wrong reply - Thanks Mr. Sysshad80)

[@Sysshad]

@@voiceofreason9238 nope, wrong.. I've had this shaver now for a month. Its dries perfectly fine being in the cleaner. Also the cleaner liquid drips back into the cleaner from the shaver, so that will make the liquid last longer. It dries perfectly since it had no direct contact with the liquid. So please stop nwvroing this old thread lol

[@summermick]

tried it with dish washer and did a pretty good job🤣

[@voiceofreason9238]

I don't want my facial hairs being in the mixture that cleans the dishes. It's unsanitary. The dishwasher fills with clean water when you start the Clean cycle and then the entire mixture is recycled for the next hour to clean the dishes. There are two filters in the dishwasher but they are designed to trap food, not hair. Yuck.

[@CUSTOMAC]

excellent thank you

[@trafegon]

Thanks to you for watching! ;-)

[@2024301]

Thanks

[@trafegon]

Thanks to you for watching!

[@sarahleelay4592]

hahahaha not one question about "where is the hair that was cleaned out" or "how often you have to replace the fluid"

[@LTV249]

Lmfao🤣😂

[@roddawg320]

Yeah single use or what????

[@sarahleelay4592]

@@roddawg320 oh you you will need new fluid after two or three months depending on how much hair you produce, my best guess

[@angel.3006]

Incredibly late. But for anyone watching this is official Philips instructions. If shaver used weekly, replace every 3 months. If used daily, replace every month. I personally remove all the hair without using water just open the head turn it upside down and let the hair go down by itself. Edit: Use the brush included to remove the hair, or use something similar if you don't have one. Just make sure it's soft.

[@simonryan6850]

How often should you clean the razor? I use mine every day

[@minnieyeoh3831]

Thanks for see video this.

[@trafegon]

Thanks to you for watching 😉

[@RODOLFO65680]

Yeah so how often you replace the liquid.

[@voiceofreason9238]

If you knew what kind of cleaner to use then it would be easy to just throw the old solution down the drain and replace it in the same container. Norelco wants you to buy a $15 complete replacement container with fresh cleaning solution.

[@34YETTY]

April 28,2024. Thanks for your video

[@trafegon]

Thanks to you for watching! ;-)

[@marksapollo]

Hmm I think Brauns solution is better, been using that for a few years now. But the benefit of this one is it has no moving parts or electric pumps etc.

[@troopers0076]

Merci

[@trafegon]

Thanks to you for watching 😉

[@Numberone292]

I’m gonna guess it’s best to clean it out first using your old ways then place it there to rinse it

[@istvankis4089]

I wanted to buy a refill for the cleaner today. Sales man was told me that Philips does not deliver to Hungary. Unfortunately, Hungary is allways a stepchild of the West in everything.

[@bennylloyd-willner9667]

Have you solved it, or maybe you can order it on Amazon?

[@mikrch3935]

Thanks.Lost my instructions. Nice video

[@trafegon]

Thanks to you for watching 😉

[@serge67ful]

en Français ça serait bien aussi

[@marziotrupo1960]

Andrebbe sciacquato sotto l'acqua prima altrimenti tutti i peli dove vanno a finire! 🤔 Con il mio faccio così!

[@600322]

Have you tried to make your own cleaning solution of alcohol+detergents and refill the cleaning pod bottle? 5 euro/$ per pod is quite expensive!

[@Casomyro1983]

Buy Ultra Sonic Cleaning Machine. It saves plastic and chemical waste and money.

[@robertofps]

my guy has parkinson

[@amirprog]

Seems really not comfortable the rectangle design instead of circle design

[@miguelborrego2699]

Check your Thyroid as shaky hands are not normal. If you drink caffeine suspend it for few months.

[@richardt9102]

Informative but could have been done in 90 seconds.

[@modrisadijans383]

Смотрю и удивляюсь на сколько же люди ту... .Побрится открыть кришку не продуть, грязную сунуть в ету посуду. Всё ето вобще не нужно, ето обман чистый.

[@eravusrav3130]

Дуй, только молча. Никому не говори. Только проследи куда разлетается твоя сбритая волосня.

[@Kyrinnoi]

Промойте под проточной водой. Потом очистка. Через месяц замена жидкости. kzbin.info/www/bejne/d6iygWSViN2Krc0

[@Kyrinnoi]

Но бритвы у меня ещё нет. Только собираюсь купить 😅

[@modrisadijans383]

@@Kyrinnoi я вообще по простому, открыл, стряхнул и подул.Сколько прослужит будет хорошо.Идеально она не бреет. Когда надо идеально беру в руки опасную брытву.

[@Kyrinnoi]

@@modrisadijans383 вот я и парюсь. 40 лет брится Макс 3. А это жопа запросила красоту. Пробовал S500 сяоми через день вроде морда лица терпит. Решил попробовать серьёзнее. Только вот видел много объявлений на Авито. Не все так однозначно

[@MrAjajdkg]

Новое устройство гораздо быстрее старого! Но вот бортики очень низкие, пена может попасть на стол.

[@modrisadijans383]

Думаю что ета возня с жидкостью лохатрон чистейший. Когда он открыл и закрил гразную бритву. Какие проблемы били её продуть,или щёткой прочистить. И на сколько раз ета жидкость хватает?

[@Kyrinnoi]

Зря так думаете. Перед очисткой промыть проточный водой. Потом очистка . Хватит на месяц. После готовим по рецепту kzbin.info/www/bejne/d6iygWSViN2Krc0. Так как купить негде. И да . Бритвы у меня ещё нет 😂 Но я покупаю Панасоник 9 U. Соответственно задался целью обслуживания ещё не купленной приблуды

[@GunterKupka]

Rasierer

[@GunterKupka]

Danke

[@GunterKupka]

Danke

[@GunterKupka]

😂😅😢😅😊❤

[@edwardlea6483]

does not work with pre electric oil. Gunge stays in head Useless Edward

[@adamogilvie6951]

Yeah I would rather stay with a dollar razor. Atlest it shaves. I paid 150 dollars for this razor and it is garbage!

[@edwardlea6483]

cannot have been tested. Have tried a number of times.. Do not buy. Does not clean. even after the cleaning process you need to rinse with hot water. Waste of money Edward

[@LTV249]

Thank for your honest opinion. Bob.

[@Lucky_Thirteen13]

Thanks!

[@trafegon]

Thanks to you for watching 😉

[@rickcrane5089]

Thanks!

[@trafegon]

Thank you very much for your support!