Transform any desk into a standing desk

[@anthonylorbach9365]

Fantastic video. I am glad I didn't have to watch someone with an expensive cnc machine do the work. I appreciate the advice for those of us who don't have such machines.

[@paulschwartz6074]

Very neat solution to a common problem. I love the simplicity combined with the design aesthetics -- this could easily be an affordable commercial kit product. I also really enjoyed you taking us through the process and the the problem-solving.

[@sandersjones1577]

You did very well and you taught me something. Thank you for sharing

[@k1sfd1974]

If you add a v-groove on the top of the tongue(s) where it meets the back (after it goes through the upright), it will drop the angle as well.

[@lucyandethel1]

I bought this leg frame on Amazon and I plug it in and it goes up 47 inches and down to desk height and then you have to cut your own table top. I just love it now I’ve ordered another one so I can put it in the woodshop at the end of my table saw, and when I need a little helping hands, I can make it the height of the table, saw and cut along piece of wood, since I have no one to help me

[@JimFleming1953]

Job and beautiful work Marie! Your shop looks better and better everyday.

[@terrencehemperly1936]

Very nice video and project!! I am glad you FINALLY painted the back cinderlock wall.

[@DianaH-id6yn]

I'm so glad I found your video!!! Amazing job!!! Thanks a lot!!!

[@mon2dan]

WOW!!! That was so cool! Very impressed! Great Job!!

[@jere7429]

Great idea for those who can't sit down to long

[@kennymysak2079]

Turned out great I really like the foot idea you added to help with the angle cause it will let you play with and see what works best and if you move it you can make sure it's stable

[@IEnjoyCreatingVideos]

Great job on the standing desk Marie! Thanks for sharing the video with us!💖👍😎JP

[@Robert8455]

Very nice. Love your approach, your wood shop and that beautiful smile of yours. This would look very cool with mahogany edge banding and some nice dark stain with a stain finish.

[@sandman2651]

I really enjoyed watching this build going from concept build to finished build looks fantastic you nailed it

[@danphilie8257]

Great idea I need to get off my butt and make one Thanks for sharing 😊

[@kfx216]

Just what I was looking for - thank you!

[@hansdegroot8549]

That's a clever build. Thanks for sharing.

[@willsside1]

Love it! Could also have V notches on the back of each shelf (on the top of each shelf) to make them more level.

[@apowell389]

Not sure if I would need a standing laptop stand personally. But I can see many people sucking up your design or at least wanting to purchase one from you. I love your design and the process you went through to build that uber clean stand. Very well done.

[@ykkfamily]

Loved the celebration move at the end 😁 great build. I was going to make something like that but this definitely helps 😃 thank you

[@joelcopeland3018]

This is a great build... Well done... Kudos...

[@SawdustmakerLori]

Great idea and I also picked up some good tips from this video so thanks for sharing!!!

[@jimheom3788]

a notch on the top side of the tongue could also be used to bring the shelves to level

[@ashokmoghe8035]

Great video. Thanks for sharing. Looking forward to the measurements and details. TIA.

[@joeyrinella8902]

Marie very well done , I really enjoy your site you got great ideas ,and i like your Cap cheers

[@ZeoCyberG]

Something to look into if you ever do more of these angled type jobs, but if you had a vertical tilting router table then you could set the angle for each slot to be at the angle you needed the shelf to be and gotten a tighter fit... Some lifts offer the option to tilt, just like a table saw. While some tables can be tilted or you could make a jig to set the work piece at the angle...

[@margildejesusfloresmartine1982]

I enjoy your videos and your Work so Clean and neat. It seems that is made up to the presentation video but I am pretty sure that is your workstyle and this is awesome I am learini this from you also to be clean when working the wood.

[@aaudain1]

Great idea 🤠💡👍

[@Quizfeuer]

Great value, thanks!

[@onsapplikasies8620]

Excellent.

[@unburriedtalents599]

I like it. I want to make something similar.

[@thomasschley3672]

Router feed direction: a good way to remember is grab your hand held router with your right hand, your thumb should point toward the workpiece edge, your pointer finger points the direction to move the router.

[@scotter_dotter]

Marie’s R&D❤

[@Thrift-T_Treasures]

What kind of angle finder is that? I've never seen one like that. Looks like something I need.

[@opalko67]

Cool build but is it wobbly? In the last 10 seconds or so of the video it seems to have a fair amount of shakiness to it when you are using it.

Rien d’interessant à dire, juste un commentaire pour le referencement, mais en Français est-ce que cela marche ?

[@Andy-te6jj]

well done

[@johndoe6032]

Great design! Reminds me of my daughter?s adjustable Tripp Trapp chair. Would the angle have been better if you made wider slots? Maybe 1 1/4”?

[@HolisticTake]

Do you sell this? How much?

[@thomasbrovarone7136]

Shelf Sizes: is the usable size of the shelves 32x14 and 14x14? If so, the blank needs to be bigger to accommodate the tongue, correct ? I think I found the answer based on measuring a laptop and keyboard. sizes in the blog are the overall size and you cut out the tongues

[@Houariabbes42]

Can you tell us about the purpose of this product, Is it problem solver.

[@PedroherrmadbeefSanchez]

I couldn't find the plans on your website would you be able to help ?

[@ericcannon8558]

Do you by chance sell this item?

[@marcuspullan1142]

How did you like it in the end? Was pc/monitor too close to to your face?

[@TheHkluivert]

Yep, I was wondering the same

[@steven_vogt]

I really enjoyed the process almost as much as the final product. Kudos! 👏👏👏

[@spiralstares]

You mention both counter clockwise and clockwise on inside edges in this video; which is a bit confusing. Otherwise great build!

[@АлексейРязань-щ5м]

А покрасить и покрыть лаком?

[@SkepticKritikCinik]

👍 💐

[@bowlchamps37]

Challenge: My dad´s 1800lb desk.

[@MCsCreations]

That's just brilliant, Marie! Really well done! 😃 Stay safe there with your family! 🖖😊

[@norbertkern9357]

Well built, thanks for the video Best regards from Germany

[@woodshopnerdery]

Nice job. I like how large the keyboard tray is. It's always nice to see a project build video.

[@stevethea5250]

11:50 13:30

[@leonardohard9604]

14:45 😉

[@its4electric]

Nice

[@raulsoto2088]

Me encantan tus proyectos.. Eres una mujer muy wapa.. Un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱

[@brianjordison2910]

Good timing.....my son asked me to build similar just yesterday Have you used it much? Do you like it? Thanks again for a great video.....

[@Androchan]

OMG i've never seen this orange angle tool! What is it called? Can the handheld drill press be used on walls? Is it confortable? Also how is your cat? Love your videos!

[@norm5785]

Thank you for sharing, looks great very useful, Stay safe happy and healthy from Henrico County Virginia

[@victoriachatfield4612]

Oh, I love the efficiency of your space. I don't enough room for my tools, so they're spread out among a storage room, carport, garden shed, and attic. Certainly not conducive to making something like this. Good on you for your most excellent build!

[@williamellis8993]

Looks great, Marie. Couldn't you have worked in a couple of hexagon inlays (lol). Bill

[@DennisHellberg]

This is a really interesting concept! I want to try it out =) Thanks! Youve earned another sub =)

[@davidmeyer9204]

Your prototype / concept gave he a great idea for a smaller one, think iPhone or iPad and a bluetooth speaker. As always thanks for sharing and giving an old man some ideas. 😃

[@paulcooper9187]

Like that, I spend too much time in the working week sitting at my desk. I think I will go and try this one out, or use it as a basis of something more specific for my needs (twin monitors) , thank you , great idea, made to look so simple

[@wikbriks5753]

You are a very patient person, this type of project takes a boat load of time and effort. Nice design.

[@SteinerHaus]

Very neat design and execution. Good ole Canadian Ingenuity, eh?

[@peterlivingston8155]

Very cool idea, seating will be the death of me.

[@ollipoytakangas]

Nice work👍👍👍

[@thomasstauber3638]

That's a cool build!! 😎

[@johnbauer3801]

very nice, great idea...

[@giorgosroumeli4782]

Super Projekt gutes Video