ABB Diverter Type On Load Tap Changer Installation procedures EEB links • EEEB Website Link www.eeeb-egy.com • EEEB Facebook Page Link / eeeb.egy • EEEB LinkedIn Page Link / eeeb-egy • EEEB KZbin Channel link / enghanykamel
Пікірлер: 19
@owinookello93583 жыл бұрын
Hi kamel good work
@EngHanyKamel3 жыл бұрын
Hey, thanks
@shahzadaslam32213 жыл бұрын
& thanks for good video
@EngHanyKamel3 жыл бұрын
You are welcome
@shahzadaslam32213 жыл бұрын
I love to do this job
@EngHanyKamel3 жыл бұрын
👏👌
@AKSHAYKUMAR-xx2ed3 жыл бұрын
Very Informative Video. I have a question, how is an On Load Tap Changer defined thorough its specifications ? For example a Power Transformer would have Technical Specification in Terms of power ratings in KVA or MVA and Voltages on High Voltage Side and Low Voltage Side as 230/13.2 KV and 24/31/37 MVA . Similarly how do you define an OLTC ? Also is it possible to use same OLTC for a Power Transformer of rating specifications 230/115 KVA and 170/238/300 MVA and another Distribution Transformer of Power Rating 230/13.2 KV and 24/31/37 MVA ? If so, would it not be extremely cost inefficient to use same OLTC for a smaller distribution transformer ? Would be optimum ratings (specifications) of OLTC for both type of Transformers mentioned above ? As a student, I would really appreciate if EEEB Team could help me understand these concepts . Thankyou.
@EngHanyKamel3 жыл бұрын
Thank you Try to give your suggestions and i will check it so you will learn better
@AKSHAYKUMAR-xx2ed3 жыл бұрын
@@EngHanyKamel Thank you for replying to my comment. Looking forward to your reply on the query.
@EngHanyKamel3 жыл бұрын
I mean you will try to send suggestions and i will revise it
@AKSHAYKUMAR-xx2ed3 жыл бұрын
@@EngHanyKamel I will try, please correct me where I am wrong. An OLTC should be specified in terms of 1. Highest Voltage Through Equipment , 2. Maximum Rated Through Current and 3. Transformer Power Rating. Accordingly ; OLTC Type 1 (15 kV, 1500 A, Transformer Rating (10 to 100 MVA ) OLTC Type 2 (26.4 kV, 2000 A, Transformer Rating (100 to 200 MVA) OLTC Type 3 (72.5 kV, 2500 A, Transformer Rating (200 to 300 MVA) These should be some methods to define an OLTC. Although I am not sure of the values. For example would it be possible to configure an OLTC Type 1 and would it be suitable for use in Transformer of Power Rating 230/13.2 KV and 24/31/37 MVA ? Or will we need OLTC Type 3 for this type of transformer as well as 230/115 KVA and 170/238/300 MVA Transformer ? What would be the maximum voltages (spec 1) and rated currents through OLTC used in above two transformers ? From what I see in the video OLTC is a significantly large piece of component. Is it possible to fit Oil Immersed Part of an OLTC designed for a 300 MVA Transformer inside the Tank of a 40 MVA Transformer. Or is there significant difference in dimensions of OLTC made for these two type of transformers ? Thankyou.
@EngHanyKamel3 жыл бұрын
The tap changer should be installed on the HV side because of lower current and accordingly lower arcing energy for arc interruption during tap changing, so please update
@masimokomakech42043 жыл бұрын
Good info . I work often tapchangers in Uganda . Yo email plse for consultations.