Traxxas Revo 3.3 Throttle return spring Fix. Cheap and easy

[@asiringoringo1]

Good info, I might try this to both of my revo's thank you

[@jackdurden466]

It looks like you’ve got the aluminum throttle pull arm at the carb. I’ve been meaning to get that for a while, I hope it’s better. Ahh you did point it out. I’ve gotta get that.

[@TeRniZ95]

Great video

[@masterkingk]

my throttle servo is pushing up instead of down. what could be the problem?

[@rcsendandblast1579]

Question bud when you turn on the car and remote is the servo horn for the throttle link supposed to open up carb sleeve I think this was installed wrong when my cousin did some work on it. When I turn the Revo 3.3 in the servo opens up about 10 percent of the way open. When it’s idling is the gap the .7 to 1 mm gap Enough to keep it running. I believe I set it rich to compensate for this massive air opening. Any help I’ll take it. 👊😎

[@Sloppyjoe96]

i have a slayer and the spring is too weak, should i just replace it with a new one? mine returns but only wants to go like half way

[@ironhead320]

I got a 2055 throttle servo