Check out our all new 1X-2 Snow Blower here: spykerworkshop... Sorry no snow here yet to actually show it off! Stay tuned to my channel, I will post a billion videos once it snows!
Пікірлер: 47
@joeecord51026 жыл бұрын
That V shaped snow plow idea sounds amazing! Great work!
@jeremyboettcher74967 жыл бұрын
Looks awesome Ryan! I mush say the video doesn't do it justice it looks very impressive in person. Thanks again for the hardware kit and for selling me your old blizzard. I can't wait to finish printing my blower.
@mr.everythingrandom94707 жыл бұрын
That is awesome you have improved a bunch over the years
@swechevy7 жыл бұрын
That snow blower is amazing. Have been thinking a long time about buying one from you and modify it to fit the motor on the rear of my trx4 unimog, with a drive shaft up to the front to run the blower to make the weight distribution better. Now when the snow has arrived here in sweden I want it even more...
@blackedoutbandit59596 жыл бұрын
That is bad ass. If I had the money I would definitely get one. It would look good on my trx4 with the 1966 Chevy body
@MrNiteriders16 жыл бұрын
That’s sweet man. Nice work👍👍👍
@ChrisCareyCode5 жыл бұрын
This is so awesome. Great work!
@SnowwyVin963 жыл бұрын
Does the mini snowblower fit on the Trx-4 sport with the trx-4 mounting kit?
@charlesb78315 жыл бұрын
Absolutely outstanding!
@bensp11934 жыл бұрын
Amazing great job on all your products. Spektrum DX5c is probably a better way for you to make all work together thur 1 transmitter and get receiver than fonction with all channels required. Believe with newer tracks model it could be just amazing. Adding a skid plate to bumper mounted that could be added or removed from winter to summer might be better to protect front servo mechanism. Also for TRX4/6 or blizzard mixed channels FR/RW with up/down snow blower can be great way to go. As heavy equipment operator the real big machinery have this feature as no one should back up with blower down. I did this mix on my Blizzard SR W/plow; plow on ch5 and ch5 set as none (no nob) it mixed with master ch3 (left nob up/down) so can manually adjusting slave ch5 and also mixed master ch2 (right nob up/down such FR/RW) slave ch5. For control of Flysky transmitter FS-i6X; V tail is set on with ch2=ch2-ch4 and ch4=ch2+ch4 for FR/RW. Right nob left/right is ch1; master ch1 slave ch4 (for tank turning opposite tracks direction). My Blizzard SR all stock and channels set normal are ch1,3 and reverse ch2,4&5. I am not doing publicity but if it gives you ideas to setup or helping a reader to setup Transmitter/Receiver well enjoy your RC fun times. Thank you doing those amazing product and time spent to upgrade them. Cheers
@nepoleon97056 жыл бұрын
I wanna see that baby eat up some snow! I want one! That would just be a sick addon on my TRX 4!
@bradleycook3045 жыл бұрын
Are you going to make a mount for the Trx-4 with the traxx's installed for the snowblower to fit?
@jarretmiech85196 жыл бұрын
Spyker you need to make a loader or a fork lift for the front or back somehow?
@acmeradioinc6 жыл бұрын
Just when you think you seen it all,this is amazing what a great job
@Sweet_Dude_Shibby7 жыл бұрын
Very cool! I just mounted my 3d printed snowblower on my losi night crawler, it works good. Looking forward to the TQi mod to get more channels, will u be modding the 4ch TQi only? Or will it work on the 2ch & 3ch TQi's?
@thegreatestmoo7 жыл бұрын
2ch would be impossible to make work, but the 3 I will defiantly look into. Do you happen to have both 4 and 3ch tqi's? I wonder if they work the exact same with channels 1-3. The 3 channel would be limited blower control though, probably just truck steering, throttle, then use the switch to switch to, blower ESC, and chute rotation. There would be no way to also lift the blower, but it is still possible to drive like that, just harder to turn around.
@swechevy6 жыл бұрын
Ch1-3 is the same on all of them. The transmitter in the trx-4 is actually a 5ch, but their software do not allow use of ch5 without "activating" ch4 first. Also ch3 can easily be modded for a 3-position switch by changing the 2 pos thumb switch for a 3 pos toggle switch.
@thegreatestmoo6 жыл бұрын
I seen the 5th channel is connected to the 4th, it seems their radio does some processing on the 5th channel to work their diffs, not sure if you can directly control the 5th, maybe with mods? I think I can code the 3 channel mode in such a way where weather or not you mod your switch for 3 way, it should still work, with the stock 3 channel 2 way switch it just gives you blower ESC + chute, but then it you take the time to mode in the 3 way switch the radio would then turn into 6 channels. This is exciting now!
@swechevy6 жыл бұрын
Another option for a cheap radio must be a modded flysky gt3c that gives 8 channels. Just ordered one for my trx-4.
@Sweet_Dude_Shibby6 жыл бұрын
No I have 2 of the 2ch TQi's that came with my MERV & ERBE, then I bought a 4ch but I don't have a 3ch TQi.
@rcjan56906 жыл бұрын
That is awesome...i live in the artic part of Norway, and we have plenty snow, so i realy could use one of them blowers...Where can i get one, and everything needed to mount it to my TRX4...hope you come up with a kit soon..I sure can`t find it on EBAY..I LOVE THAT THING..
@RattlesnakeRCandHobbies2 жыл бұрын
Is this the 1x or the 2X blower?\
@shnek51436 жыл бұрын
Is there is chance you could make a Rc4wd Beast 2 mount?
@miniemangames7 жыл бұрын
Are you able to putt it on a redcat Everest 10?
@brandontroyer27756 жыл бұрын
Do you have a website showing what all you sale you have some very good ideas
@dakotasnow11745 жыл бұрын
Do you think this design could be made to fit on the crossrc uc6?
@thegreatestmoo5 жыл бұрын
I used to have a UC6 and it easily would handle the mini blower, but I would not be able to develop a mounting system without the truck. You might be able to customize the TRX mount to make it work
@dakotasnow11745 жыл бұрын
@@thegreatestmoo thats kinda what i was thinking, thanks! Btw your design skills are awesome keep up the amazing work!
@nullerdk16 жыл бұрын
i need that wow,,, how much ?
@andrewbeaton33026 жыл бұрын
YOUR A GENIUS!
@3vil8unny5 жыл бұрын
what about if you have the lift kit on?
@jacobcoy26385 жыл бұрын
I would love to know if it works with the lift kit because I have the trx4 sport lifted with tracks
@Rubber_Wheelz5 жыл бұрын
erevo 2.0?
@shonuff4206 жыл бұрын
OMG I NEED ONE FOR MY SIMMIT!!!!
@jerekalapudas12824 жыл бұрын
can you share stl🤔
@jerekalapudas12824 жыл бұрын
and how much would it cost
@mr.everythingrandom94707 жыл бұрын
Can you make a rc snowmobile
@Rckid283 жыл бұрын
Only took someone 3 years to finally come out with a 3D printed snowmobile!
@Little_grey_off7 жыл бұрын
To much big for the scale but i love youre blower
@thegreatestmoo7 жыл бұрын
Yeah it is huge, but the TRX-4 handles it like a beast, I just got it to fully lift the blower in the air, using plastic spacers inserted into the front springs to lock them.
@onyxtheprotogen79072 жыл бұрын
Links plssssss
@bingus35827 жыл бұрын
Have you seen your snowblower on a Premacon front loader ? It looks kickass! kzbin.info/www/bejne/rmiTXnWppK6jodU