Traxxas Trx4M Defender accessories 

#traxxastrx4m #trx4mbronco #fordbronco #djcrawler #trx4maccessories
Hi everyone, I will be continuing the customisation of the Traxxas Trx4M land Rover defender.
And today I will be installing most of the custom stainless steel panels that I could find for the defender.
Like always, I’ll be showing you in detail what the product Looks like, and how to get it installed.
I was happy with most of the products I used in this video, besides the one back, stainless steel panel above the rear door.
So far, I have been impressed with most of DJ crawler accessories for the Traxxas, TRX 4M
In the next video customising the defender, I will be fitting all the metal window guards.
So if You are enjoying this content, don’t forget to smash the bell, so you don’t miss any of the latest content, and of course, I would really appreciate if you hit the like button and subscribe if you haven’t.
Thank you
All the accessories are used in this video. I will leave a link for them below. ⬇️
Just found this amazing item on AliExpress. Check it out!
1,21€ 45%OFF | TRX4M Cover Metal Skid Plate Decorative Cover Air Intake for 1/18 RC Crawler Car Traxxas TRX4-M Defender D90 D110 Upgrade Parts
a.aliexpress.c...
you can find multiple items in the store, this is a link.
Just found this amazing item on AliExpress. Check it out!
1,95€ | Rear View Mirror Bumper Fender Lampshade Exhaust Pipe Chassis Window Net For Traxxas Trx4m 1/18 Defender Rc Car Upgrade Part
a.aliexpress.c...

[@Redblock_performance]

Loocks realy nice with the panels. Got them in black on my Defender. Your Defender looks great!

[@rcfungames]

Hi bro I'm really sorry for the late reply, I have had loads of problems with all my devices. Finally I am able to access and see all my comments. And I would like to say thank you bro!! It's taking a while to get it where I want it but it's finally getting the look I really want. Thank you so much for watching bro and for taking the time to leave me a comment.

[@3DRC-printing-and-design]

Ryan, that looks amazing. Good job brother.👍💯🤜💥🤛

[@rcfungames]

Hello Don 👋 Thank you so much brother, I think it's turning out awesome! 😁

[@ste.p]

Great timing, I was thinking of getting some of these but was unsure how difficult they were to fit. Thanks bro!

[@rcfungames]

I haven't really seen many videos fitting any of these accessories, and since it was time for me to finish off these projects, I thought I better get stuck in. They're not difficult to fit, it just all requires a lot of patience! There are a lot of little fiddly things to mess with that could be a lot easier. Especially that double-sided tape that never seems to be cut right! 😅 It's a pleasure bro thank you for watching and dropping some awesome comments 🤜💥🤛

[@scottiewhodoo]

Looking good! Just got all of mine from Ali last night. Good and fenders are on and the rest tonight.

[@rcfungames]

Thank you bro, that's awesome, retire this is my favorite part of a build! Finishing off the custom look. Thanks for watching bro 🤜🤛

[@tevoh]

Those vents were a subtle, but very nice detail on there!😎

[@rcfungames]

Thanks bro I thought it looked better than just those flat vents! I feel it gives the body more character!

[@pedellbills130]

I love your stuff!!

[@rcfungames]

Thank you so much bro! I really appreciate it 👊😉👍

[@RCCrawlerz209]

Bro....the title says "Bronco" when you're working on your Defender. 🤦🏼‍♂️😅 lol On another note.... Have you looked into the Club 5 Racing accessories for the TRX4Ms? They have a roof rack for the TRX4M Bronco I want to try out! 🤔🤨

[@rcfungames]

Bro! Thank you so much for pointing it out! I am so stressed out trying to get everything done and still work on the videos! That I completely messed up the title! 🤣🤣 At least I've got a subscriber, that's actually paying attention 🤜💥🤛 Thanks for the heads up I will definitely check out some of their accessories and see if I can order them from where I and based. 🤜🤛

[@ste.p]

For the hardware I bought tiny drill bits and a small drill chuck which fit my electric screwdriver.

[@rcfungames]

I definitely think the drill bit is the easiest solution, but more often than not those are the drill bits we always break! That's why I also showed the option of doing it with a lighter and a needle. I always end up using that technique as I end up breaking the drill bit 😅🤣🤣 Next time I go past the hard way store I think I'll pick up at least 20 of them 🤣🤣 I used to have an awesome electric screwdriver that had all the drill bits I needed, but can't seem to find it! Sounds like you've got a perfect setup to do this kind of job 😉

[@ste.p]

@@rcfungames I’ve broken a few drill bits myself. I need to get some more now I think about it!

[@backshedrc]

Looking good out on the course.

[@rcfungames]

Thank you bro 🤜💥🤛

[@rcjoe406]

Looks awesome brother me likey 😊

[@rcfungames]

Thank you so much brother I really appreciate it! It's nice to finally come to the final stages of each build. 👊😁

[@rcjoe406]

@@rcfungames yes always great to see things come together and work out