Trex 500X - Enjoying some flying before Sunset

Still has a tail blowout on pich pump, heli is nice tho. (Belt Drive)
Pitch Curve Normal, 42%-46%-50%-75%-100%
Throttle Curve Normal, 0%-40%-70%-75%-80%
Throttle Curve Idle 1, 80%-80%-80%-80%-80%
Gyro 55%
Flight Time 3 Min
Accessories
T-REX 500X KIT Set x 1
Microbeast PLUS Flybarless System x 1 set
470 Carbon Fiber Blades x 1
78 Tail Rotor Blade x 1
520MX Brushless Motor(1600KV/3527) x 1
DS530M Digital servo x 3
DS535M Digital servo x 1
RCE-BL80X Brushless ESC x 1
Spektrum DSMX 2.4Ghz Remote Receiver SPM9745 (RB406770) X 1
3350mAh 22.2V 6S 35C Supersport Pro LiPo Battery X 1
spektrum DX8 G2
Specification
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g
Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.
Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.
T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.
Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.
Align Trex T15
Align Trex 150
Align Trex 250
Align Trex 450
Align Trex 470
Align Trex 500
Align Trex 550
Align Trex 600
Align Trex 650
Align Trex 700
Align Trex 800
Align Trex Pro DFC - Dominator HV Flybarless

[@v4zzy219]

Thanks for sharing!! Still waiting for that XL 520 maiden!! 🚁💨 I got a XL 550 all built just waiting on the cyclic servos!!

[@33gate1]

Hi, i wanted to use the servos, motor, esc and flybarless unit from my 500X, and even the main blades and tail blades to build the XLPower 520. But after today flying the 500X i'm loving the 500X, so back to the drawing board. To be honest i have the XLPower motor and HobbyWing 120 ESC that came with the 520, and the 515mm blades, i have a brand new Microbeast and a tail servo, so all i need is same like you, just 3 cyclic servos :) I'm a bit lazy, only 15 to 20% have i built the XLPower 520 :) I'll be looking out for your XLPower 550 flight!

[@jean9174]

p͓̽r͓̽o͓̽m͓̽o͓̽s͓̽m͓̽ 🤩