Trick Flow Stage 2 Kit Dyno Day

[@geomod6850]

Great to see a bunch of buds digging in and building something. What a joy. Nice work!

[@shitboxfox4876]

Glad you enjoyed it!

[@TJay074]

Get the gold box with the harness adapter. EFI source

[@93stang19]

I have the same setup and similar #'s . Nice fun cars with a little top end additions

[@MrCaribe65]

Nice numbers on an NA setup. Not bad for a "shitbox". 😎😉 Enjoy yourself, and be safe.

[@jaydollar140]

Nice video bro? The stage 2 cam fit with no problems? Was it set dot to dot on the timing gear?

[@Bigface281able]

That's the 360 hp kit so 300 hp to tires anyone have the 432hp topend kit with 11r heads I just bought and wonder if math is correct should be like 350 is wheel

[@evilinside5984]

I think 360 to 370 to the tire, is what people are seeing with that 11R setup.

[@chrisfinamore6364]

Nice numbers. Did you ever run it at the track?

[@shitboxfox4876]

Not yet. I'm trying to get a TKO600, subframes, and torque boxes installed before I do that

[@foxbodymigrane8055]

More info on the set up please

[@shitboxfox4876]

Stock 302 short block, trick flow twisted wedge heads, trickflow track heat intake, 1.6 roller rockers, trickflow stage 2 cam, 75mm throttle body, egr delete, 24lb injectors, longtube headers.

[@shitboxfox4876]

Let me know if there's anything else in particular you'd like to know

[@foxbodymigrane8055]

@@shitboxfox4876 did your ptv clear fine installing the gear straight up? I am doing the same set up but 30pound injectors and 70mm tb.starting this winter picking up my tf stg2 cam on thursday.from what i have researched about this set up...i think you are leaving power out of it .i am expecting 320 to 330 .keep the vids coming.

[@shitboxfox4876]

I agree I think it has more to give. I had plenty of piston to valve clearance when I checked with the clay test I think it was like .200" of an inch or something with stock valve reliefs. I want to put a cold air intake and I just recently installed a wideban sensor with a Megasquirt. I'm gonna get it dyno tuned again once I'm finished with that and a few other mods to the rear end. Keep in mind we only brought it up to 5500rpm. I think the powerban on that kit is good for like 6500 with that intake, head, cam combination. Goodluck with your build man!

[@foxbodymigrane8055]

@@shitboxfox4876 6.700 pushrods ?

[@Foxy86_part2..kin92]

I just recently did a build similar to yours like month ago . Did the Trickflow manifold track heat Trickflow timing chain Shorty headers Trickflow heads F comp cam Maf conversion with the a9L ecu 75mm tb 24lb injectors with the collaborated maf All in my 86 with a 88 motor currently having trouble with my timing as well as the exhaust leaks I'm more than likely going to buy the holly terminator X then see where that takes me is there anything you recommend me to do to get it 100 . Like should I upgrade my distributor and alternator

[@shitboxfox4876]

Make sure you get the wide ban for the terminator x in the collector of the header so that its reading all the cylinders on that side. I made the mistake and had it in one header pipe. That caused issues with tuning for me. There are some really great tuning forms on Facebook that can teach a whole lot. You should check those out!

[@MrCaribe65]

I use a Megasquirt. The cost is petty good, and they make one that'll plug into your harness. You'll need a wideband. They have a package that includes one.

[@DaRkmatter5.8]

What's the point of dyno with no o2 sensors on a maf

[@shitboxfox4876]

I wasn't aware of the issue at the time.

[@606garage4]

What size is the rear tires in video?

[@shitboxfox4876]

265/50/R15

[@johndosh2469]

When do u feel the cam come on?

[@shitboxfox4876]

The dyno sheet shows a solid smooth power curve the whole way from 2,000-6,000 rpm

[@johndosh2469]

Thanks, I just ordered this cam for my supercharged setup

[@brandonknight7240]

​@@shitboxfox4876 i got the tf stage 1 with twisted wedge 170 heads, i already had 24lb injectors new still in the box will i have to get a new MAF for the 24lb or is that calibration something a tuner does?

[@stang9023]

Are you kidding me 300hp we are impressed by come on guys put some real time and money into that fox

[@shitboxfox4876]

I'm toying with the idea of putting a 32v in it 🤔 we'll see what happens. For now it's a fun little car and gives me some time behind the wheel

[@stang9023]

The first step you should take is getting a new block or keep the old and bore and stroke then do you trick flow upgrades

[@chrislangley4724]

Don't know where u live but I've got the 5.4 out of the navi forsale

[@fsub616]

I don’t think anyone is like wow 300hp that’s a lot and an impressive number what we are impressed by is 300HP to the tires on a N/A 302 set up is because that almost never happens we all know this 😂 But I betcha that thing will hang along with some of the newer stock mustangs, Camaros, chargers, challengers with that power to weight ratio.