Transistors Gold Recovery | Recover Gold From Transistors | Gold Recovery

[@hankaan7542]

Just the advice boys. I’m a jeweller. And almost everyone making the same mistake. When you melting gold dust or fine gold ; do not put fire directly onto the pot. Mix it 50%gold 25%borax 25% sodium carbonate. Raise the pot with pieces of stone or tile and leave underneath elevated. Hold the flame from the sides and under until it becomes red and gold sticks to the powder. Then heat it. When melted , hold the pot and try to spin the gold and catch all the gold inside the melted borax. Good luck.

[@colonialcharlie8702]

Is there much added benefit? Or is that just "the way it's always been done?" Perhaps a cleaner look? Most small ewaste refiners use much less borax and don't set up like a charge for fire assays. Small amounts of sodium carbonate sprinkled before heat glues the powder into a nice compact clump with a just a little heat to sides. Then tiny bit of borax to lift after its beaded. Keeps cleaner crucibles for alot of small batches.

[@hankaan7542]

@@colonialcharlie8702 you are correct my friend. What I was trying to do is ; after so much work and cost , most people loose their fine gold in the melting process. Pressured gas flames force the gold out that you can’t see it with the naked eye. This is one of the method , I was trying to save small scale investors.

[@colonialcharlie8702]

Ah yes, haha I have my "lesson crucible" with red spots all over it, where my first test burns' fines powder ended up. Luckily it blasted into a homeade chamber, and i could recover the majority from a peice of ceramic wool it got sprinkled into. (Chunk of the filter paper gave way and then let pressure blast through the powder) Now some sodium carbonate goes a long way. Thanks for advice

[@idontknowmyfirstname69]

Learned that one the hard way when i first learned refining... Melting my very first button... Bout 4grams in the dish. Hot it with the oxy torch flame and poof, empty dish... Managed to wipe up and recover 1.8grams out of right under 4.1g... Ouch

[@hankaan7542]

@@idontknowmyfirstname69 lucky that, you’ve done it in a place that you could recover some of that. 4 grams worth of scrap is lot of hard work

[@Hendy-tr1fy]

Mantap terus berkarya, guna pengetahuan dan ekonomi jangan lupa alat kesehatan penting.

[@rustymotor]

Fascinating video, love to see gold being recovered from old electronic components. I have worked in the electronics industry for many years and have hoarded many boxes of old circuit boards and discreet components. Some of the earlier boards have gold plated circuit tracks all over and ceramic chips with gold plated pins and covers, normally the high end Hewlett Packard medical electronic tech. Some day I hope I can give this stuff to someone who would be interested in recovering the gold, love to know how much could be recovered.

[@Typikillwhiteguy]

Hey man I'd love to recover the gold for you by a similar process as this, if you're interested, msg me and we'll work something out!

[@flanniganfitzgerald175]

I believe you, my life passion is unlocking the riches in old components and without forward thinking g.o.a.t.s. all of that gold would have been lost. I would love to process your material and share it on KZbin, if you would be willing we could work out the details. Hope to hear from you soon.

[@raymondreyes8046]

Me too! But I'm just a self taught garage refiner

[@KKRRenewables]

Here here for the self taught garage refiners out there!!

[@rezachamankhahi1967]

Hello, you are fine. Can you give me the gold to recycle from them? Thank you

[@akgoldbear7669]

I collected 1000 transistors for gold recovery and before pouring sulfuric acid on them to dissolve the plastic I decided to open transistors. I was shocked!!! 😧 Out of 1000 transistors, I found only 17 gold-plated transistors. Different types of transistors and they were all copper with a little bit of silver. 🤔

[@toomuchdebt5669]

How did you open them????

[@akgoldbear7669]

@@toomuchdebt5669 You will find the answer in my last video. I showed how especially for you 😉👌

[@anhconnoem8267]

and how much gold you got ??

[@dogan1405]

Try high frequency power transistors or transistors used in radio, TV and satellite transceivers.

[@toomuchdebt5669]

Been waiting for this one. There might still be gold brazing on the coppers. You need to add some borax to the melt dish to help settle the gold beads in to one button.

[@tomspeed2000]

Fantastic job, I waiting long to see it here…I collected many of this kinds transistors, some of them are so tiny and others are really big and heavy..but I didn’t know it have silver coating on the copper.. by the way during the burning time, after the plastic are gone, due to the presentation of copper, the flame turns to the so beautiful green color..I did it at night and because of the darkness the effects of flame was amazingly pretty.. thank you very much..

[@sticksstonesandalittlemeta3517]

Nitric acid only in the beginning to remove copper and silver rinse well and then aqua Regia for gold. More effective and less contamination of the gold

[@私エンターテイナーです]

almost never missed to watch every episode on your channel..give me inspiration,many things i learned..keep upload new series..

[@TrinityGoldRecovery]

✌️✌️🥰

[@silver_salvage_savage]

Love the channel. I think they could dial back on the nitric a little and save some money, or keep adding gold bearing material until the reaction stops to maximize the return on chemicals.

[@rootyoou2521]

من فضلك كيف يكون في بعض الفيديوهات راسب الذهب بني وبعضها راسب الذهب اسود. وبعضها راسب الذهب احمر هل الماده المرسبه هي السبب؟

[@scottsmith9438]

So a 55 gallon barrel of transistors, is worth the time to process?

[@chriscarley9951]

Looks like you need to glaze your melt dish with some Borax before using it. This will help with the gold collecting together.

[@استخراجالمعادن]

من اين حصلت على 0.55 ؟؟

[@MehboobMuhyuddin]

Best simple easy very nice video

[@TrinityGoldRecovery]

Thanks for liking

[@godfilmsproduction]

How much silver in 1.5kg transistors? Please make a video to extract silver from transistors.

[@shaneyork300]

Thanks for this video. I've been hoarding my transistors for years now. That was more gold than I was expecting, I was guessing about .2 to .3g yield.

[@TrinityGoldRecovery]

✌️✌️

[@matthewcooke4477]

Try selling them as is first ! Might be shocked when you make 10x more than you would have from breaking them

[@shaneyork300]

@@matthewcooke4477 I'm hoarding all gold & silver bearing components because I'm going to do the gold recovery & refining myself. I'm not really caring if I loose money on somethings because this is a hobby and I'm doing all this for fun.

[@remusspiridon5463]

""That was more gold than I was expecting"" MORE????? 0.55 FROM 1.5KG ?

[@escrapchannel]

Very good result for such material! 🌟 👍

[@TrinityGoldRecovery]

✌️✌️

[@adrenalinemedia]

I once made a video on how to recover PMs without chemicals ( at least in the first stages before final refining) I think the right usage and the availability of so many different chemicals can be difficult in some countries. Still, nice work!

[@ProspectorTripp]

Thank you for your hard work. Yeah, it’s better as a hobby! ✌️PT

[@anjaneyulug1753]

Very good result, is there any high grade Low grade transistor, Tv board transister wil come like this result.

[@cyntiacy9509]

Boa noite Trinity, depois da extração do ouro, solução azul que ficou contém outros metais a ser extraído prata, cobre e alguns outros se houver, isso?

[@ayoubarshad697]

What kind of nitric acid is used to gold recovery and silver recovery

[@goldalbaniarecovery2384]

hello master i have a question for you BGA (Chipset) or graphics cards that are on the computer board or in the graphics cards we can get the gold from those chips

[@TrinityGoldRecovery]

Yes, you can get gold from those card, you can find same video on my channel..

[@ilikechamp3086]

배울게많은 학습 영상 감사합니다 ^^

[@jesusromeronegrete7250]

After grinding the transistores and washing them I know thats they give legs in what is going yo proceso with the aqua regia.? Thanks for You attention.

[@andipadaunan2415]

I've been waiting for so long , for this Vidio 🙏

[@TrinityGoldRecovery]

✌️✌️

[@giorgosxyrichis3630]

I try transistors ... Very good in copper recovery !!! Nice vid ❤

[@scottsmith9438]

At about time 330 would a gold pan be useful?

[@Tuner9069]

When rinsing and pouring water out of a container of precious metals, always use a fine filter to catch any precious metals that try to escape with the water.

[@g3clips]

Não era melhor ter passado na bateia o transistor moído?

[@ribeiroflyby9766]

Hummmm até que seria uma boa ideia...

[@juretoljan5800]

Dear! I don't have a reaction of getting sediment by adding sodium metabisulfite, the gilded components dissolved in AR what's the problem?

[@TheDurdane]

Did you denix it enough?

[@juretoljan5800]

I've tried more urea now, I think something is happening, my solution is cloudy and it's a little reddish. Tomorrow I'll see if there's any gold deposits

[@Akshay_agg14]

I have 10k mosfets and transistors , how much gold can be extracted from this

[@lukasvykopal]

Hi I have a neutralized smb solution I added some that the gold precipitated but when I check the solution with sncl2 it shows that there is still gold to save them?🙂

[@TrinityGoldRecovery]

After 24 Hours?

[@lukasvykopal]

@@TrinityGoldRecovery Yes, he left, but little gold has precipitated and liqvid shows that there is still some gold there and I don't know what I'm a beginner and I don't see if it can still be precipitated.

[@TheDurdane]

@@lukasvykopal did you denoxed it enough?

[@BullProspecting]

When i get my gold mine open im going to send you some materials so you can make a video! Great Work my Brother! May God/Allah bless you with Great wealth 🙏🙏🙏 P.S. you should bu4n them 2 times. Its a way better yield!

[@elbeyiasan2387]

This is a good result, I didn't expect anything like this. I was buying a kg of it for 5 dollars. There is about 15 kg, I didn't even process it because there is nothing, but there is, this is the definitive result. Are you sure?

[@احمداحمد-ر7ع9ك]

مرحبا صديقي هل كل ترانستورات تحوي ذهب ام نوع معين محتواك رائع وممتاز ❤

[@juretoljan5800]

Hi everyone. when lowering gold from aqua regia with SMB, it is lowered with gold and lead/tin. (gray white precipitate) how to get rid of it? help please

[@coinsadventurer]

thats great, your new subscriber Coinsadventurer channel. One kilograms of transistors prodction of 0.55 grams of gold. Good na

[@murlbailer3755]

I’m glad you found a job but is that good for the environment ?🐎🌻✌️

[@paranoidharith4512]

Do you provide training and how can I reach you please help

[@AlbertoHernandez-vz8lr]

Bonito video as canviao de copelas trini las artesanales le hivan vien concentra mas el oro en el centro de la copela ami parecer un saludo desde españa😜

[@mr.g-sez]

really good job, your channel and work is awesome. just a couple of questions, what do you do with the waste solution, do you just neutralise it and then get rid of it? or do you get the copper and other metals out of it and neutralise it then? and why you always use tap water?

[@TrinityGoldRecovery]

We just neutralize the solution.

[@TrinityGoldRecovery]

And the tap water is available for me

[@ilikechamp3086]

안녕하세요 😄 트랜지스터 1.5kg 토치로태우고 분쇄하고 걸러서 물 400ml 염산 900ml 질산 300ml 모두 넣은후 30분후에 필터 작업후 똑같이 따라했는데 0.07g 금이 조금석인 은이 나왔어요... 뭐가 잘못됀건지 알려주세요 ??ㅎㅎ

[@ambalapetlover7904]

All this type transistor has gold .???? Or only old electronics transistor has gold ?????

[@keytefirerefining1355]

The white coating is nickel or tin usually not silver

[@dirceudepin7755]

true, I did a test already, it's nickel and tin 

[@keytefirerefining1355]

@@dirceudepin7755 yes. Very very rare they use silver. I never really test but I've seen the odd few people say they seen silver

[@LuisRodriguez-xf9lv]

this times are good to experiment recovering nickel, price going up but hard to find

[@keytefirerefining1355]

@@LuisRodriguez-xf9lv not worth it and super hard due to it being more reactive than hydrogen

[@LuisRodriguez-xf9lv]

@@keytefirerefining1355 that is right. what i am doing is saving nickels ecery time i go ti de bank ask for 20 dollars in nicuel. is a copper mix but 25% niquel . some day us cancellsome coins like canada already did and be profitable to sell for content. nothing to loos. if nothing happer iget my money back and the bank ger a very very heavy box of nickeld. i also have more tnan a thausend pound of copper penies. copper is poormand gold jaja

[@rookierollhunter8652]

How much silver was recovered?

[@thomasmarks7176]

Great job you're close but you're missing a few small elements to make your refining more accurate more fast and easier Your missing suction during filtering And a hot plate with a beaker We'll drop gold in 20 minutes instead of overnight

[@sungn365]

lol u do know these guys are in a 3rd world country, I doubt they care about vacuum filtering or any lab type of equipment, his shoes should speak for themselves

[@Red9GearHeads]

Great work. Thanks

[@shdydchrkwy3705]

يعنى انتا بتفكر ازاى لما تحسب الغاز اللى حرقت بية والاحماض والوقت وبعدين اخد نص جرام من الذهب يبقى ولاليها ملة ام لاذمه انت انسان محترم لانك بتقول الحقيقة احسن من ناس كدابين باعو الوهم للغلابة مثلى واتفاچأ بكيلو بورد المحمول 350 جنية وبعد الشغل ومشقة البحث على الاحماض الجيدة التى يصل سعر اللتر 8دولار والنصف للباقى والناتيجة 0,7 جرام مغطوش ثمن المنصرف فماذا اقول على كل حال شكرا ليك

[@трофимовалександр-д4ш]

приветствую вас не знал что в масфетах есть золото я с них забирал только медный радиатор

[@АртемСергеев-м8ф]

Откуда ему там взяться то😂

[@sherifaly1017]

this is the best 👍👍👍

[@TrinityGoldRecovery]

✌️✌️

[@洪志遠-p3s]

is that true 0.55g gold recovered from 1.5kg transistor? it's a kind of hardly believe for me, I predict only 0.2g at most.

[@user-vb6ecgf]

خوب

[@uttamkarmakar5350]

You added some extra gold 😅

[@laith114]

After 10 minutes watching this, I said I’ll buy gold from the shop

[@kevinbuchanan7045]

Do you recover the copper and silver as well

[@TheWolfster001]

Add a few drops of dish soap to the water, will make the ash stop floating and will settle out quicker...

[@TrinityGoldRecovery]

Good information

[@meolvidecatorcequinientos7356]

En español Eso blanco qué es?

[@aidilaidil425]

Bro,h2so4 50%v solution can use

[@TrinityGoldRecovery]

Using 50% sulfuric acid (H2SO4) in aqua regia is not recommended. Aqua regia alone is strong enough to dissolve gold properly. Adding sulfuric acid can cause impurities like lead (Pb) and silver (Ag) to form insoluble precipitates (e.g., lead sulfate or silver chloride), which will settle at the bottom. While gold will still dissolve, adding sulfuric acid unnecessarily complicates the process. For best results, use only aqua regia to dissolve the gold and follow proper precipitation steps to refine it correctly.

[@yukseltuysuz7316]

where is the silver in the transistors? can you share the video of it?

[@TrinityGoldRecovery]

Watch our another videos from silver recovery playlists

[@ivsongold322]

NICE 👍🏾

[@adearyanto4665]

Recuest Bos😊..until paladium proses to finish😊 please bos...thanks..

[@muhammadridwanasshiddiqiea6647]

Mantap 👍

[@detudoumpouco5220]

C é louco só a emissão de furano e dioxina não vale o custo da saúde .

[@miltondamiao6540]

Perfeito,top.

[@muhammadwahyu6168]

Ini dimana pak

[@MehboobGee-b8b]

Nice day nice video

[@kamurandemirpolat2282]

Can you add Turkish subtitle option, greetings.

[@aberagebretsadik4040]

Thanks a lots !!

[@ГеннадийЗайцев-з9м]

Все любители золотодобычики ходят в таких тапках.На этом не разбогатешь

[@kimloaiquy3641]

Good

[@afshinaria2509]

خود قطعات الکترونیکی بسیار گران هستند و به اندازه طلا ارزس دارند و لازم نیست برای به دست اوردن طلا قطعات الکترونیکی سالم را از بین برد

[@shawezmalik2623]

Resistore capsule se gold nikal kar batao

[@malyshenkovolodymyr6785]

hi !are you from India ?

[@TrinityGoldRecovery]

Bangladesh

[@jpbonhomme5051]

Judging by all the acid you used, along with the other consumables, I'd say you were very lucky if you broke even. Still cool though

[@CiptoCipto-ty4yd]

ada di mana ya di lokasi mana ya

[@gipadang9815]

The process made smoke,, what about enviroment concern

[@Alex-kp3hr]

They really don't care in 3rd world countries because getting money for food, clothing, shelter is of primary concern and restocking chemicals. Not much policing going on. What about burning the dead bodies for a funeral? Don't you think the wood burning and burning bodies are an environmental concern yet the practice still continues today because land is scarce and more needed for agriculture and housing and industry and not cemeteries.

[@عماركريشان-ب3ق]

Fantastic

[@bhopaljan5694]

With lots of love💞

[@TrinityGoldRecovery]

🥰🥰

[@kamleshkumarsingh8006]

I have some old mobiles can u extract gold for me

[@zacstonegamerzzyt1620]

VERY NICE VIDEO

[@TrinityGoldRecovery]

✌️✌️

[@songmaynui8466]

Tuyệt vời quá

[@youngk2495]

good job

[@TrinityGoldRecovery]

✌️✌️

[@ВикторФатин-т4р]

Почему вы не доживает пыль до бела? Ведь уголь абсорбирует золото на себя.

[@bandijanardhan2201]

Good PROUSES .

[@TrinityGoldRecovery]

✌️✌️

[@elbeyiasan2387]

Thank you

[@ares3664]

Хорошее видео но не выгодно.Реагенты больше потрачены и время

[@danielk1536]

Bro I Have a Doubt Transistor We can recovery gold? Seriously 😮 Plz.. Ans me..

[@internationalmasterspeaker1879]

Wow

[@redsun5145]

Can you help us on our new projects sir?

[@soaidurrahaman-sl3ty]

Please vaiya urea kaha milega botado

[@jackmclane1826]

The "silver" coating on the copper heat spreaders is not silver.

[@damianstasek8946]

Tin

[@kolinneytran3605]

Слишком большой расход кислот, можно было обойтись меньшим количеством

[@kevintaylor6015]

Why couldn’t step 2 be just heat everything until the junk burns off and all you have left is gold? No way I would go to this much trouble.

[@craigleepaint]

Damn never would have thought

[@Treebronx]

Wow interesting who even thinks of doing that

[@ajibathmohamed9105]

Thank lot of u

[@jasong8377]

I didn't look like you glazed the dish first before melting gold

[@gameplaydabagaceira.6220]

Só pelo experimento mesmo, porque por fins lucrativos não vale a pena.

[@azrildoung1482]

👍👍👍