Triple-T

[@TyrellKnifeworks]

Do you have any questions about this laser so far? Let me know! There's links to both the F1 and F1 Ultra in the video description. 👍🏻

[@RedBeardOps]

Interesting testing, I'll have to try out some of these settings!

[@TyrellKnifeworks]

The SVG you use is better, I just don’t know those settings as well. SVG is definitely faster. 👍

[@benjaminseigal5192]

Very cool. Thank you for the review

[@TyrellKnifeworks]

Thanks for watching!

[@MASI_forging]

Great work 👍👍

[@TyrellKnifeworks]

Thanks for watching!

[@exman05]

Thanks for the info. Looking at buying my first machine. This one might be overkill but it’s tempting. Price is steep though.

[@TyrellKnifeworks]

If this one is too much for you, Che jour the XTool F1. Much cheaper and great for home use. There’s a link in the video desc. Thanks for watching.

[@Sanatani_Dhruv.Agarwal]

I love your creations.... I started watching from a week and now I only watch your videos mostly ..... Also,, Can you make a dagger used by Main Character from SOLO LEVELING??? I would love to see its build...

[@TyrellKnifeworks]

I don’t really do replicas, but I do have a dagger build in the works. Stay tuned!

[@samdahlandsonsforge]

Denis, got a link to the original laser? What do you think the major difference is for the added cost?

[@TyrellKnifeworks]

Both links are in the video description. The Ultra is a fiber laser so it’s MUCH more powerful and faster. What took me 10 mins on the F1 takes only 1-2 mins on the Ultra. Plus when you see the attachments video, you’ll see that the Ultra is designed for production batch work. The F1 is for small home use.

[@dmitryk754]

My question is how deep can the engraving get? 20w fiber should give quite a tactile impression, theoretically.

[@TyrellKnifeworks]

I’m sure you can do quite deep with enough passes. It will emboss brass/copper or other soft metals. Thanks for watching

[@Nimariel]

Can you get any depth on the aluminum business cards without going all the way through?

[@TyrellKnifeworks]

You really are just removing the lacquer coating on these to expose the metal. There isn't much depth and there's no real risk of going through. Thanks for watching.

[@nobodyelse-h6h]

Would be nice to do a couple of passes on the sharpened edge of the knife for many great reasons 😊

[@TyrellKnifeworks]

I’m not sure what you’re referring to.

[@nobodyelse-h6h]

@@TyrellKnifeworks the laser can engrave, put the knife on its flat side and instead on engraving the laser can be used to sharpen and temper the steel

[@TyrellKnifeworks]

@@nobodyelse-h6h ha, no I don’t think that will work.

[@nobodyelse-h6h]

@@TyrellKnifeworks in France, a Knifemaker does it with great results...

[@richardbranton190]

I was going to buy one of these but the local engraving guy only charges me $4 a blade. Nice machine 👍

[@TyrellKnifeworks]

Yeah if you’re just doing one-off blades, it’ll take awhile to justify it. It does let you up charge for custom engraving though. Thanks for watching.

[@jf6720]

I wish you would have shown the calibration.

[@TyrellKnifeworks]

It’s a little tedious, but easy. You loosen a screw near the head and then tighten/loosen another until the dots line up. Thanks for watching.

[@timmeijerink9504]

Wonderful machine, but it,s quite a amount of money it costs. The results are fantastic.

[@TyrellKnifeworks]

Yes, this isn’t an entry level machine. The XTool F1 is definitely meant for home use and quite a bit more affordable. Thanks for watching.