Triumph Bobber to lightweight racer! 🥵 | Thornton Hundred Motorcycles

[@steelmilkjug]

@thorton hundred motorcycles I can only hope and dream you do a custom Bonneville T120 or Scrambler 1200 XE :)

[@paulmatthews7193]

Never thought I'd see a triumph bobber pulling wheelies 👍👍👍👍👍😂😂😂😂😂😂😂😂😂😂😍😍😍😍😍😍😍😍😍

[@joshtap]

How much does one of these boys set you back?

[@A.M.Customs]

Ощеня мощна ❤

[@HoagesMoto]

Cool stuff as always, bit of a weird choice shooting for a lightweight/dynamically pleasing bobber and putting an aesthetically driven fat front end on it I'd say - plenty more weight and handling improvement to be had by dropping a couple inches off the front end width. A very cool series of bikes nonetheless :)

[@MaximumProductions70]

Same on the back. Skinnier wheel will mean less unsprung mass

[@anthonybluhm4724]

At the end of the day, we know these guys are more about form than function. This is a big step for them. 😁

[@daveo9844]

Ingenious. Rear tyre warmer/ cleaner 😎🍻

[@lazypanda88]

I love the stripped back look. But Im not sure how I feel about the exhaust snaking through underneath the air filters.

[@FourIntoOne]

Yep the complete opposite of charge cooling.

[@johnDukemaster]

A Bobber/chopper was the cheap way of making better bhp/weight by just chopping bits of. Things not needed for race. I guess this is not the cheapest way of achiving that!

[@azmansaleh9336]

cool man. i am 60 yo man from malaysia and like like this machine very much. it is my dream to have it from u 😂😁🤣. thanks for sharing

[@davidthomas6566]

I need one so bad this is what will bring me back into biking , I f-ckin love it!!! now I gotta rob a post office 😅😮😎😂 British at its best well done guys...

[@nizzmo100]

Post office wont get you the ready s..Fort knox maybe .

[@The_Real_JN]

​@Mar Vel depends if you're in the states, if you get your hands on money orders...

[@AceNZ1964]

Absolutely Beautiful M8 , You need to invite Foggy or Brad Pit or someone to endorse these, They would Love em. Or Me lol . Cheers from New Zealand.

[@ducaveli]

43kgs stripped! That thing has been on a crash diet. You shoulda had the scales out or the h8ters ain’t gonna believe it. Nice build 👊🏼

[@ThorntonHundredMotorcycles]

Haha the wheelie kinda proved it 😂

[@azialbasha]

what a beast whew

[@davidcrilley2171]

Just nipping out to rob a bank! $$

[@c.g.c2067]

good idea. The one thing I dislike about Triumph's classic range bikes is the weight

[@neilsullivan3358]

That is the nuts so impressive the big question is how many shirt buttons to get one ??

[@ThorntonHundredMotorcycles]

Thanks for your kind words! Drop us a DM Neil or email [e-mail]

[@thephantomsrevenge3883]

Need those 3d printed tail light!!! Great minimalistic idea!!!!

[@paulsturmey28able]

This is stunning if only I had the money. Great work lads.

[@ThorntonHundredMotorcycles]

Thank you Paul!

[@cross7707]

@@ThorntonHundredMotorcyclesare yall selling this exhaust yet?

[@rosstisbury1626]

Bad to the Bone . . nailed it

[@Jeroen440]

Insane, looks fantastic! That's what he said...

[@Mastaholic]

What's the price on this kind of build?

[@leonardorodriguez9919]

Definitely will need heat sheilds for the exhaust pipes and id angle the exhaust tips away from the rear wheel other than that its absolutely beautiful

[@rashad.]

If i lived in UK i would have one, fucking awesome looking bike...

[@xxhotelcrazyxx]

Jesus Jody and the gang! Def my favorite build to date you all have done! I love seeing your imagination running wild to come up with these one off designs! Keep up the superb work! Proud to be running many of. Your parts on my bobber. I can't go anywhere without massive amounts of attention and people wanting to talk about it!

[@ThorntonHundredMotorcycles]

Thanks so much mate for your feedback! We really appreciate the support and love to see you repping our brand on your bike!

[@DadoRados]

i LOVE this build. you guys out did yourselves. Thank you for sharing this build!

[@ThorntonHundredMotorcycles]

Appreciate your feedback mate thank you for watching!

[@DadoRados]

@@ThorntonHundredMotorcycles been following verh closely, i'm doing a Bonnie scrambler build myself.

[@JumpingWatermelons]

Yeah, you did

[@jcast1976]

She… Is… Beautiful..

[@ThorntonHundredMotorcycles]

Thank you!

[@robertmartyniak4299]

We were on our way to see you Friday. Me and my son as it was his birthday but the bike had other ideas! Old Triumph motorbike which wasn’t playing ball! Carb issues! Hopefully see you guys soon!

[@ThorntonHundredMotorcycles]

Ah sorry to hear that Rob! Look forward to seeing you soon

[@akaynomore]

Never 4get where Triumph journey began...MADE IN GERMANY 😂 THATS WHY ITS ALWAYS THE BEST

[@pm3577]

You’re the only bike builders in Britain doing anything worthwhile IMHO. All the others are doing the same ole same ole. How’s the clearance on this bad boy? I thought I heard some scrapping when you were mildly cornering? Not the less, she’s a nice bit of kit. 👊

[@jameswick4867]

The bike is sick. But the exhaust imo needs more base, a deeper throaty sound. But that's my preference. Fantastic build once again

[@ThorntonHundredMotorcycles]

Thank you James appreciate your feedback

[@jportal001]

love the shop and all that you guys do but your customer service sucks tried emailing you guys about products from your web sight and I have not heard a peep from you guys nothing from the UK or from U.S.

[@MacTDI]

THAT'S HOT!!!

[@jaysworld5378]

Maybe I missed it but how much does it weigh now?

[@ThorntonHundredMotorcycles]

I don't have the total figures to hand but it was a 43kg weight saving!

[@Donnisaac]

Saludos 🔥🇨🇱👹

[@chrishall734]

Looks mint. I’ve just made myself a cafe racer based on a cbf250. It goes like stink now after new exhaust, air filter and carb jets and only weighs 130kg !

[@ThorntonHundredMotorcycles]

Love that Chris!

[@adrianwilson44]

Awesome 👊😉

[@skylershank9309]

Odd you don't say anything about the engine specs. Also bobbers don't have clip-on handle bars.

[@petebird7171]

Absolutely superb looking bike, very, very well done for making it/them, one day, one day, 👍👍👍👍👍👍👍

[@ThorntonHundredMotorcycles]

Thank you Pete!

[@AndrewJB]

Guys have you done AIS delete on these bikes? I'm looking into it but not really any instructions out there.

[@AndrewJB]

Not sure If I missed it in the video, have they been mapped or still OEM mapping?

[@akira2196]

If I already have a Bobber, can I buy the individual pieces for my project?

[@lazypanda88]

seems to be an in house only package. doesn't look like they're planning on selling the parts individually. Theyre really going for that exclusivity to sell the package.

[@ThorntonHundredMotorcycles]

You can my man! Visit our webshop to check our full range of in house engineered bolt on parts

[@lucasrouille3794]

General question: do you guys usual replace the throttle body on your bikes or is it just powder coated?

[@razorsharp9850]

Knocked it out of the park again! Geeez! I wish I had some extra cash laying around. Can’t go wrong with this one. Stunner!

[@ThorntonHundredMotorcycles]

Thanks so much mate for the feedback!

[@colindeans5972]

Looks great and would sound great for about half a mile after which it'd drive you crazy.

[@ThorntonHundredMotorcycles]

Each to their own Colin! Appreciate you watching the video and feedback!

[@Amanandhismotor]

As always, another fantastic looking bike. I have a technical question of you can answer it. Would it not benefit the bikes performace if the exhaust was moved away from the K&N filter? Surely the idea of a K&N is to draw in more air, but specifically as cool air as possible. With the exhaust running under the the new, uprated filters, are they not just going to draw in hot air? Thus restricting the performace and shortening the life of the filters? All be it a miniscule detail and a barely noticable reduction in power. But, details are details 😁. Would love some thoughts on it?

[@ThorntonHundredMotorcycles]

Hey Rob thank you for your kind words and question! Drop us a DM on Instagram and Jody will be able to respond personally!

[@Amanandhismotor]

Thanks for the reply. Unfortunatly, I do not use instagram! I would love a response, so I will drop you guys an email. Keep up the amazing work 👍

[@sangamum9192]

Am I the only one to get anxious on exaust placement??

[@lukotoystv]

I was just gonna say that. You can easily burn your legs without a heat shield. If u ride this on shorts (just to buy beer at the shop) you gonna burn ur legs.

[@sangamum9192]

@@lukotoystv I was thinking about tyres.

[@patrickflanagan8008]

Bloody hell lads, you've created an ogre......outstanding.

[@veers0r]

Awesome, but there is no way this would be road legal around here. :(

[@wellingtono.2631]

🙏👍👍👍👍👍😍

[@lockenhero4473]

Jody which helmet do you wear in this vid? Looks awesome.

[@jigztv2670]

nice bobber build

[@johnlaw5762]

That sound 👌🏼

[@YoloVib3s]

That exhaust looks sick asf!!!

[@ThorntonHundredMotorcycles]

Thank you!

[@RotaryandRides]

WOW, This is insane and sounds amazing. Top work :)

[@ThorntonHundredMotorcycles]

Thanks so much man!

[@RotaryandRides]

@Thornton Hundred Motorcycles I Hope you're at Goodwood Festival of Speed this year? I'll definitely be popping over to see all this work in person 😁

[@victorjay9586]

Insane! That’s equivalent to 95lbs!

[@ThorntonHundredMotorcycles]

🪶

[@FantasyGhost]

The taillights are 3 in 1 taillights? I like the motogadget inclusion! You guys used the mo.unit blue yet with the mo.button? Would save on fuses and wiring weight too, plus the overall look of less visible wires would be awesome. I was also wondering where I could get those “Deutsch” connectors you mentioned in one of your videos. They look sleeker than the standard click-in connectors.

[@MaximumProductions70]

Didnt expect to see the bobber wheelie 👍

[@ThorntonHundredMotorcycles]

Thornton Hundred just doing Thornton Hundred things 🤣

[@DinobandhuKarar-eu3dg]

Would u sell me one?

[@ThorntonHundredMotorcycles]

Hell yea drop us an email [e-mail]

[@k3ith8ee]

Any concerns about the 3D-printed light housings deforming with the heat? (top-notch build. Love it when you go scorched earth/spare no expense!)

[@Vikas_fit]

😪😔

[@MrBensthejet]

You guys just keep on delivering

[@ThorntonHundredMotorcycles]

Cheers mate!

[@Frostfire1000]

Which triumph is used to make the sl

[@raulsubido6328]

Wow this is the best you make,i like it❤🥰

[@ViolentRider]

The exaust pointing to the tire......

[@richardparis501]

love your vids.....you guys are pushing levels big respect 👏

[@ThorntonHundredMotorcycles]

Thank you very much Richard!

[@garyrobinson4847]

Jody and the team thank you 😃🤙 looks insane

[@ThorntonHundredMotorcycles]

Thank you Gary!

[@johnbeardsley7360]

HOW MUCH?

[@ThorntonHundredMotorcycles]

Drop us an email [e-mail]

[@vaibhavkambli2061]

Price?

[@ThorntonHundredMotorcycles]

Drop us an email [e-mail]

[@english.ricardo]

As always, awesome. Cool man. I can't wait to the moment you open a shop down here in Brazil.

[@deancrisp3596]

Looks lovely but those exhausts are blowing straight onto the tyres that scares me

[@monsterzeed]

I love Thronton

[@galocascio]

Amazing!!! The exhaust route: Insane!!!

[@spedybrent]

Perfection ❤

[@penksvubalam3977]

think of it hot flames can degrade the tire and high speeds.

[@Vicegoodn]

With the noise, will it pass MOT, Builds are usually great, but the sound like childishly obnoxious, especially if it can't pass MOT

[@darrendesmond5395]

Exhaust noise isn’t a part of the MoT test, it’s down to the discretion of the tester. Luckily, my tester is deaf…

[@penksvubalam3977]

8:27 nice transition.

[@ThorntonHundredMotorcycles]

Thanks mate I will tell Stevie he will be thrilled! 🤓

[@penksvubalam3977]

@@ThorntonHundredMotorcycles Stevie is your editor write! Pls answer these how can I buy your TH bike i am from India. Did i need to come uk. I am very big fan of minimalist designs. Keep rocking 😉😎😎

[@shreyasjoshi4867]

The brushed aluminium is a nice touch.

[@lanti3904]

But most of your bikes are not weather proof and mud guard are too short! Is that applicable for rainy days ??

[@thorout8377]

How much?

[@phil9100]

Too

[@ThorntonHundredMotorcycles]

Drop us an email [e-mail]

[@quanwick4516]

Beautiful build!

[@ThorntonHundredMotorcycles]

Thank you Quan!

[@johnbeardsley7360]

The tire is going to get to hot with the exhaust on it

[@anthonybluhm4724]

$85k?

[@simonkennedy6116]

I can't believe you got it to wheelie

[@ThorntonHundredMotorcycles]

Haha this thing is wild!!

[@B051UPO]

How wide are those tires front and rear?

[@adamrichmond6348]

I think he said 6"

[@sayyedFamilyvlogs7057]

Hiii

[@steveharvey2203]

Don't plod get all bitchy about lack of rear mudguard?

[@Desmo904]

I would imagine the exhaust would attract Plod more than the lack of a mudguard. LOVE the look of the bike but if it were mine, I'd have a Jekyll and Hyde exhaust on it I reckon. (Bit loud)

[@Luko203]

Ein traum

[@jean-claudevergison]

J'adore!!! mais tu ne peux pas avoir une machine comme ça en France, trop de restrictions 😢

[@michaelmendoza7701]

That is so dumb and stupid

[@MimiTheJoker]

C'est faux

[@sangkaraarivalakan6537]

Just simply amazing mates! Huge fan here!

[@ThorntonHundredMotorcycles]

Thanks so much man

[@gpzfan5272]

The tyre writing ruins it for me

[@chriscunha3246]

I have a 2020 speed triple right now and i want a bonneville so bad😭 a build something like this is perfect in my eyes

[@ThorntonHundredMotorcycles]

Thank you so much mate!! Get in touch, we'll build you one 😊

[@SeksL28]

Beautiful bike and sexy!

[@ThorntonHundredMotorcycles]

Haha thanks mate

[@Jameslee-ys2jr]

Nice now I want one