Troubleshooting an E1 Error Code on a Mini Split - Perfect Aire

In this video we will be detailing how to troubleshoot an E1 error code, as shown on a Perfect Aire ductless mini split system.
For more information, visit: www.perfectaire.us

[@whatwouldiknow1759]

In other words, get an Airconditioning specialist!

[@juliettedumouchel6021]

Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) kzbin.infoUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

[@Kelly-pt3np]

JUST TRIED THIS AND IT WORKS!!!!! THANK YOU SO MUCH ! SUBSCRIBED 🎉 (thought it was not enough refrigerant)

[@PerfectAire]

Thank you for the support! :)

[@jveiga68]

I actually had an “A/C specialist” take a look at my system and he literally spend days trying to fix my system with no luck. Thanks to this video I was able to find the problem! The unit kept displaying E1 and it turned out the power wires were reversed. Problem solved in about 5 minutes! Thank you ⭐️⭐️⭐️⭐️⭐️

[@PerfectAire]

Thank you for the feedback and happy to hear this video helped! :)

[@kennethcortez3586]

How did they get reversed tho? Are there tiny little men in there messing with it???

[@GuuiYae]

@@kennethcortez3586 I think it got reverse since the 1st time the careless technician installed it.

[@shellim1nerva]

I have an intertek unit. Been installed for couple years & has been fine. We get a big rain & now I get this error code. If this just occurred for the first time… wouldn’t the wiring already be right? And it’s the storm that somehow messed with it? It’s the only appliance that was affected.

[@roweldeontoy1094]

Is this a newly installed unit?

[@a.bbasher9035]

Walton AC comes E1 code sometimes but all is well! Please tell, whats the story of them big puppys ....There will be no problem if run!! Please tell me?????

[@malihatabassum3921]

Is it ok if I use AC. showing E1 code in night. Is it safe..?

[@merchielmbtv2905]

Thanks

[@JosePerez-hs8nq]

Hi. Bless you !!! I have one question. One mini split Frigidaire have E1 code. When i see the control board i note a little burn mark over it. I dont note any component burn . How i can verify if is the control board the problem ???

[@PerfectAire]

Hi Jose, I cannot speak with certainty about Frigidaire units, but have you experienced any storms lately? Is there a surge protector on the unit? E1 normally means there is a communication fault between outdoor to indoor units, and if there is a burn mark on the board, it more than likely means the outdoor board has been shorted, or a possible blown capacitor. Especially if it did storm before giving the E1 with no surge on the disconnect box.

[@ayie_choqq792]

@@PerfectAire good

[@Zeusbemad]

Did we have to cut power supply of house or we hve to cut pwr supply of MCB of ac

[@PerfectAire]

Hello, the power supply of the AC.

[@Zeusbemad]

@@PerfectAire thnx

[@Cardholdin94]

My units not turning on at all

[@babayaga1466]

B5 how to fix bro

[@MsShailendra123]

Hello,my kenstar 1.5 ton ac ....usme E1error show ho rha bnd kiya tha bilkul achchhi condition m.. Uska remot khrab ho gya tha online nya remot mgaya aur jaise hi use kiya error show hone lga how to fix my problem

[@TrillxVandal]

So what do I check if my values at 2 & 3 stay positive while checking DCv ? Thank you

[@PerfectAire]

Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.

[@TerryRGraham]

outdoor board is bad

[@SA-om7pz]

How much sir to fix e1 error in bluestar inverter ac

[@efragonzalez1228]

If it a easy fix save money if not it better to get a new one

[@mrkca222]

So what do I do when it has worked perfectly for ever then shows E1? Cannot possibly be reversed wiring??

[@brandonjohnson7851]

mine did that afther i replaced the fan because it became slow and noisey i have ordered a new board i hope this work

[@PerfectAire]

Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.

[@FamillyFunTime]

in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada but you get that from goodman company if your unit is a goodman hope that helps

[@plantvszombieand]

Paano mag fix Yung carrier aircon

[@aleksandrchebotar3901]

I have sophia 36000bty. E1 error. Wire good, power good, motor good. I replaced pcb board but anyway E1.

[@lifesoundtrackitaly]

On my split I found EE but second E reversed in front of first E. What mean?

[@jakepropst6479]

thats e3?

[@lifesoundtrackitaly]

@@jakepropst6479 yes

[@plantvszombieand]

Paano Aircon Yung E3 Carrier

[@dropsouza6804]

EL 01 error code blinking what is the solution

[@PerfectAire]

Hi Thomas, if this is a Perfect Aire mini-split, please take a picture of the error code and send it to [e-mail] where one of our customer service representatives can help!

[@TophatDude1]

@@PerfectAire Who is Thomas?

[@plantvszombieand]

Troubleshoot yong Aircon E1 kaya

[@robertosanidad1824]

E3 how to fix thank you.

[@PerfectAire]

Hi Roberto, check out our video on the E3 error here: kzbin.info/www/bejne/iYTTYpeHp56sopY

[@plantvszombieand]

Yung carrier aircon walang 16 na number

[@plantvszombieand]

Yung Aircon carrier E3 ayaw gumana mag andar

[@Roman-IS]

Классное видео. Жаль ни слова по русски. Но как нельзя кстати, надеюсь поможет с моей beko

[@aleksandrchebotar3901]

You must learn English. Putin khuilo

[@plantvszombieand]

3 players na fix Yung Aircon kaya ginagawa 17 na lagyan Yung turbo

[@dlam8276]

What happens if I get this error after 3 years of usage?

[@PerfectAire]

Thank you for your question! Please reach out to our US based customer service team at 844-472-2473 Mon-Fri when on site the machine so we can collect more information on your system.

[@FamillyFunTime]

in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada but you get that from goodman company if your unit is a goodman hope that helps

[@plantvszombieand]

I'm watching error aircon

[@plantvszombieand]

Blue Yung electric fan tapos panglamig

[@eliasflores6302]

Tendría tener traducción a español no sólo en inglés desde Ecuador te saluda

[@plantvszombieand]

Watch ko error Aircon lang E1 troubleshoot

[@plantvszombieand]

Ang dummy number 62

[@PerfectAire]

Thank you for the suggestion!

[@plantvszombieand]

Hindi yong E3 E1 yong

[@ggpriyapriyag8898]

My ac error E1

[@PerfectAire]

Please contact us at [e-mail]

[@jcarroll112]

P6

[@plantvszombieand]

Yung number Ang dummy lang 62

[@leaaae4638]

What if my AC has been working for a while before and now it has E1 error after maybe 2-5 minutes of it running. For example, whenever i turn on my AC for 5 minutes it shut off and turn to E1 error. I cleaned the filter. It was working before so the wire must at the right spot. :(

[@FamillyFunTime]

in that case there is module inside the inside unit the one where the wires connect to, its about 85$ here in canada but you get that from goodman company if your unit is a goodman hope that helps

[@randynBroncos]

@@FamillyFunTimeow do you know it is the board on the inside unit? Could it be the circuit board in the outside condenser? Mine is a Goodman unit

[@FamillyFunTime]

@@randynBroncos it happed to me twice Once was the communication wires Second goodman told me to change the module in the inside unit if that didn’t help The module or the board in the outside unit Fortunately worked with the module in the inside unit

[@PerfectAire]

Hi Lea! If you still need assistance with the E1 error code, please contact us at 844-472-2473 Mon-Fri when on site with the machine so we can troubleshoot.

[@plantvszombieand]

Ang dummy number 62

[@damiangrzywacz6739]

This music is awful

[@alangardiner872]

WHY FUKIN MUSIC AND NOT INSTRUCTION..

[@shaikhfardin3203]

Chodu mat bana bhaiii

[@ricardogonzalez6701]

Too complicated. Just call a pro pr buy a new unit.