Troubleshooting Embroidery Thread Breaks

[@godfreyhamshire]

Dear Deborah Thank you so much for your video. I have a New Brother NV800e and was going nearly nuts with endless thread breaks after being advised to watch this video I polished the throat plate and the metal bobbin cradle with was full of burs and serrations. I think the machine metal bobbin cradle was not machined cleanly when made. After polishing the two carefully. I reassembled the lot and off I went with no more thread breaks. This evening I broke a needle when a thread snagged. The dreaded tread fraying returned, this time I returned and polished the throat place and which had a few rough spots on it and in no time we were back up and running. Thank you so much for your video it has been a great help to me. Regards.

[@deborahjones1364]

Thanks for letting me know! Happy you are back up and running. It's great hearing that machine sing...

[@Alta677]

what size crocus cord did you used?

[@Alta677]

@@deborahjones1364 what size did you use in the video?

[@JamesBluntedd_ttv]

Never used Crocus cord before, thanks for the advice!

[@michellewelch4404]

What size of Crocus cord do you get? This was most helpful.

[@1954evelyn]

What size cord do you use please

[@sandragrobler3024]

Hi how do I get a design from my machine to a USB stick SWFT1201C

[@sreihart]

How do you know what size and grit for your machine?

[@deborahjones1364]

Grit from 180 to 200 will be safe. I personally like the 59C crocus TAPE that is about 1/4" wide and 200 grit or 52C cord that is narrow like shown in the video and 180 grit. Hope this helps.

[@sreihart]

@@deborahjones1364 Thank you a bunch!

[@khanprofessionalembroidery9473]

thnx