Troubleshooting Quick Snip Machine Making A Knocking Noise

:Please Read This Before You Submit a Question:
If this troubleshooting video does not answer your questions, it may be best to google your specific model of machine and this issue for resolution. Sewing machines are incredibly unique and my videos are intended to give you the OBVIOUS reasons you might be having problems. It's impossible to diagnose or fix specific machines in a general troubleshooting video, finding your specific machine on KZbin is the next level to trying to fix the machine via the internet. Best of luck and I hope my video is helpful for you!
Is your machine making a funny knocking noise when you sew? The chances are likely that you don't need to take it in for repair, rather it's probably one of these main issues:
1. You don't have the face plate firmly screwed down
2. You need to change your needle!
Check out this quick little video to learn more and remember to visit us at www.itsjustsewi...

[@AnneCampbell-b3l]

You are a SUPERSTAR!!! I thought I was going to have to buy a new machine as there are no service places near m and I could not figure out why this noise was happening!! Thank you!!! Have a fab 2024!!!

[@donnanolte851]

I have to tell you THANK YOU so much. My Baby Lock machine was making a weird clunking mainly over thick seams. It just sounded rough. I changed the needle and it is SO quiet. You people are brilliant.

[@Disco868]

Monica, you are a star, replacing the needle resolved our problem. Thank you for your fantastic advice.

[@renitapayno]

I've broken 2 needles in the last few weeks so I've definitely changed my needle. I guess I just need to have a professional look at it.. it makes this knocking noise then my top thread snaps. I'm so sad and frustrated because I really need to finish this garment!

[@reesemorgan2259]

Me too. It's a relatively new sewing machine too. I'm constantly re-threading my machine. Changed my needle - checked that it's the right needle for the job etc. Just having no luck.

[@MixaTrixa]

@@reesemorgan2259 Any luck yet you two?

[@muhamed_eshahed]

Could you please tell me how to fix the loud sound of singer start 1306 when the machine start working and the presser bar moving up and down 🙏 Thank You

[@dereksmith1774]

Thank you so much I thought my machine was messed up and it’s brand new lol

[@darlenenelson215]

Hi, I have put a new needle, new bobbin...rethreaded it several times. It's still clunking. Cleaned and oiled it also😢 Help!!!! It's a SE400 Brother sewing machine machine model

[@shellissatt2441]

can u please tell me wats wrong with my toyota eco 34 sewing machin its so noisy

[@AbdurRahman-td4df]

hi! I wanna ask some bout knocking noise on my sewing machine. I've done your tips to get rid off this noise with tightening face plate and also change my needle but the problem still exists.. I've opened my sewing machine to take a look closely where the sounds coming. guess it's under the plate.. can you give me any tips or solution what's happened? thank a lot ^_^

[@Westseattlefabriccompany]

+anang rahman - when was the last time you had your machine oiled and serviced? You can do a bit of troubleshooting on your own but if you haven't had it cleaned and oiled by a professional - you might want to. What kind of machine do you have?

[@Angelheaven]

mines a brand new machine used it for 1 half hours its thumping do i take it back

[@kaylar7640]

yes

[@creativearti7258]

My Singer 4423 sewing is ok if slow, but when I speed up then upper portion start knocking noise. I change the needle and check bobbin but no difference.

[@jadetries]

Creative Arti I have that too. Any news on what was causing it and how to fix it?

[@MixaTrixa]

@@jadetries any update on the fix?

[@MH-hw4uh]

You said two things but it could be at least three, the bobbing too, that needs adjusting or tightening. I’m no pro but I’m having that problem now and from watching other videos, that was suggested.

[@jerleanshannon9684]

Thank you very much, there was a problem with the needle

[@puffyjo]

not true not true not true , tried everything my bobbin casing is rattling and the thread is making a huge mess, never did it before and its getting worse

[@aimeecarter1900]

I don't know what else I can do. Changed the needle. I screw it good, and now it won't back stich.

[@bernielove49]

Thank you so much that fixed it 😊🙌🏼

[@shivani4231]

Thankyou so much needle change worked problem solved♥️😍😍😍

[@evy-annstrand8010]

My machine is brand new, came with a new needle installed. Have just set it up with thread to try it out and this knocking sound is very loud. Pfaff Performance 5,2. Tried rewind the bobbin and threading it all over again.... do you have any suggestions or familiar with this type of machine? Thank you :)

[@paddyhopkins7887]

Evy-Ann Strand q

[@jadetries]

Evy-Ann Strand did you find out what the issue was and how to fix it?

[@jabulilenyembe9447]

I have a problem my stich won't come out the same

[@sdh9843]

Thank you. This tip worked for my serger🎈

[@angelalogan7672]

I have a Brother SE600. I have had it a little over a week. I've changed the needle, cleaned around the bobbin case, and it didn't solve the problem. I took a flashlight and looked under the plate. It looks like fabric debris or is something supposed to be there? I am a new sewer. Any help would be appreciated.

[@lander2100]

I did both as suggested and no change.

[@kristieprice8842]

Thank you so much! It was just a bad needle :)

[@pattimorrow6766]

tried that worked first time and now doing it again

[@kchachalove]

Problem solved. Thank you so much!!

[@rosaleezeier2559]

Thank you thank you!

[@marietteforget7804]

Thank you very much! 😎🌸

[@karengius8064]

The majority of this video isn't even a solution.👎

[@lander2100]

I agree.

[@brendalee4621]

Agree mine still makes noise

[@valeriehofmann2615]

Changed my needle and still clunking

[@jiyashah9584]

Thanks for d remedy

[@thesisters7929]

Changed needle, I thread my machine again, and my machine is vlean

[@youcannotseeme]

I have a two week old brand new hobbycraft sewing machine and it was making the knocking sound. I oiled it and nothing happened, but changing the needle worked!

[@carolinemiller8815]

Thank you this helped alot