How to Replace Rear Wheel Bearing 2011-2021 Jeep Grand Cherokee

Buy Now!
New Wheel Bearing Set from 1AAuto.com 1aau.to/ia/1ASH...
New Wheel Bearing from 1AAuto.com 1aau.to/ia/TKSH...
This video shows you how to install a new wheel hub and bearing on your 2011-2021 Jeep Grand Cherokee. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2014 Jeep Grand Cherokee Laredo 3.6L AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oboe/1A...
• Pry Bar 1aau.to/oVM/1AX...
• 18mm Wrench
• 10mm Socket 1aau.to/obfR/1A...
• 18mm Socket
• 22mm Socket 1aau.to/oo6/1AX...
• Acetylene torch
• Angle Grinder
• Bearing Puller
• Brake Caliper Hanger 1aau.to/ojo/1AX...
• Trim Tool Set 1aau.to/oaeV/1A...
• Locking Pliers 1aau.to/omd/1AX...
• 1/2 Inch Impact Gun 1aau.to/ot5/1AX...
• Ratchet 1aau.to/obFq/1A...
• Socket Extensions 1aau.to/obAa/1A...
• Torque Wrench 1aau.to/oaJg/1A...
• 1-1/4 Inch Socket
• Gloves 1aau.to/oafB/1A...
• Safety Glasses
• Floor Jack 1aau.to/o8L/1AX...
• Hammer
• Jack Stands 1aau.to/oWc/1AX...
• Pick 1aau.to/oQ9/1AX...
• Punch
• Wire Brush 1aau.to/otC/1AX...
Subscribe: / @trq
Check out our playlist:
Jeep Grand Cherokee 2011 - 2021 4th Generation: • Jeep Grand Cherokee 20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@ntomasello]

ONLY video I found for my 11 Durango. Now the FUN Begins... Thank you.

[@OverlandingOurWay]

Can the wheel studs be hammered out in your opinion? I have a 2017 wk2 trailhawk that two studs broke and the shop wants $1500 to replace which I think is a joke but I’m getting conflicting results in my search

[@jameshamilton9412]

Great video! Is there a link or a part number for the hub and bearing tool you use?

[@mygiguser]

Best video on this. Where do you find that bearing pull tool?

[@Tman0517]

Seams like the perfect time to do rear shocks.

[@jayhoody121]

Is this the same for a dodge durango ?

[@augustusmccray2404]

Shops use a press

[@billwatcher9321]

I realize your portraying yourself as a "pro" mechanic but, every mechanic I have ever worked with ALWAYS puts the bearing in the shop freezer while cleaning up the hub and removing the old race. Then just before installation, heat the hub gently with a propane torch and press the bearing in by hand. No bearing press needed.

[@johnnytardes6801]

Lolllll 😂😂😂😂by hand!

[@Corvino26]

@trq having an issue, replaced bearing as per video but now my ABS light and traction control is on, also says to service rear park assist, this wasn’t on before. I tried replacing sensor and still no luck. Any suggestions?

[@stuartinnes53]

What is to stop you unbolting the hub from the backing plate, then us a press to remove/replace bearing...???

[@vinceac990]

Great Video. Will help out much o my 2011 Jeep Grand Cherokee . OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit

[@josepha9313]

Great video and likely something I would not try to do myself.

[@ethiovoice8495]

Thanks. learned a lot from your video.

[@RedLane44]

Where can I get that bearing puller?

[@TRQ]

+@RedLane44 Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ

[@sheerwillsurvival2064]

Excellent video

[@Juanimo7]

Tools needed?

[@billstojanovski]

Have a look

[@MeowMeow98945]

Dear Sir,We are Amazon sellers and have recently launched a new product. We would like to place the product link under your video. Can you cooperate wth us? We can send you products for free.