How to Replace Front Fender Liner 2009-2014 Ford F-150

Buy Now!
New Inner Fender Liner from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new Fender Liner on your 2009-2014 Ford F-150.
This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
Tools you will need:
• 22mm Socket trq.video/ooL-...
• 5.5mm Socket
• Trim Tool Set trq.video/oadj...
• Side Cutters
• 1/2 Inch Impact Gun trq.video/otq-...
• Ratchet trq.video/obCK...
• Torque Wrench trq.video/oaGu...
• Gloves trq.video/oaaK...
• Safety Glasses
• Floor Jack trq.video/o6D-...
• Jack Stands trq.video/oUw-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford F150 2009-2014 12th Gen: • Ford F150 2009-2014 12...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@BabyPleebian]

what a life saver. i have to change my engine coolant temperature sensor and i have to get this wall out of the way. at first glance it looked like i was going to be taking off a lot more than this. thanks it was a life saver!

[@causinghavoc1225]

My ford is just as rusty, love New England! Nice video

[@AintNothingSweetThisSugarFree]

Are these all the parts needed? And if so how many do you need of each? Fender Bolt - Fender liner Screw - Fender liner nut - Fender liner retainer - Thank you for this video!

[@NoSaltLimit]

Thank you! You just saved me a lot of money lol

[@carterrides9335]

You can use some of the retainers from the top of the old liner to replace the retainers you might have had to cut

[@gersonpineda9768]

Gracias.👍👍👍