How to Replace Side Fuel Tank 1992-1996 Ford F-150

Рет қаралды 20,457

Күн бұрын

Buy Now!
New Fuel Tank from 1AAuto.com 1aau.to/ia/1AFG...
This video shows you how to install a side fuel tank on your 1992-1996 Ford F-150.
This process should be similar on the following vehicles:
1992 Ford F-150
1993 Ford F-150
1994 Ford F-150
1995 Ford F-150
1996 Ford F-150
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obgB/1A...
• Pry Bar 1aau.to/oRe/1AX...
• 13mm Wrench 1aau.to/oTR/1AX...
• 15mm Socket 1aau.to/oboh/1A...
• 8mm Socket 1aau.to/oa5q/1A...
• Fuel Line Disconnect Tool 1aau.to/o7/1AXA...
• Pliers
• 1/2 Inch Impact Gun 1aau.to/orL/1AX...
• 3/8 Inch Impact Gun
• 5/16 Inch Socket
• Socket Extensions 1aau.to/oboh/1A...
• Brake Parts Cleaner
• Gloves 1aau.to/oWE/1AX...
• Safety Glasses 1aau.to/oPP/1AX...
• Brass Punch
• Drain Pan 1aau.to/oya/1AX...
• Floor Jack 1aau.to/oZC/1AX...
• Hammer 1aau.to/oSc/1AX...
• Jack Stands 1aau.to/oQ7/1AX...
• Pick 1aau.to/oMn/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 20

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@jackjones9460 Жыл бұрын

I tremendously appreciate how calm and straightforward you are with your videos! No electronic riffs and no annoying background music to muffle or garble your words! Just clear speech (w/ a Boston accent) and straightforward instruction. I recommend you to whoever I can while talking about vehicle maintenance. I thank you again!

@harveyfloyd6045 10 ай бұрын

Good job. Good video. First one I've seen, of many, that actually shows the filler neck hose and talks about the hose inside the hose. Thanks.

@altruisticscoundrel 7 ай бұрын

Great video!

@jroalan 17 күн бұрын

I wish I could get my pressure line off the pump as easy as you did. The big one. Spent 4 hours today trying to get it off. After watching the video again, I noticed you cut out the struggle bus portion of disconnecting the second fuel line. How long did that take and what did it take to finally get it off?

@wille8266 Жыл бұрын

Nice job. Would it be acceptable to use a bit of silicon spray on the fuel hose and rubber grommet for vent? Thank you.

@Subvet684 Жыл бұрын

I’ve got to replace a fuel pump on one of these tanks, the old one only has the two pipes (just like yours did) but the replacements that I see have the three pipes (like your new one) what’s that third pipe for and does it matter?

@davidc.4399 8 ай бұрын

Good job, very well explained. Great video and teacher

@Alpha67Wolf 6 ай бұрын

I had to bend one of the tabs in slightly to get it to fit. I also used two vice grips on each side of the ring, push down and then twist just to get it started and then used a punch and hammer to move it the rest of the way. It was a tight fit .. and yes the O-ring was seated 😃

@jamesschwamberger7958 4 ай бұрын

Thank you for all your info.

@Johnsmith-ky4op 4 ай бұрын

This video was great

@john7017 5 ай бұрын

Remove and throw away the front tank molded plastic shield, it will cause the new tank to rust out prematurely. The tank sits up high and not subject to mechanical injury.