How to Replace Liftgate Handle Garnish 2004-2009 Toyota Prius

Buy Now!
New Liftgate Handle Garnish from 1AAuto.com 1aau.to/ia/1ABMD00086
This video shows you how to replace the Liftgate Handle Garnish in your 2004-2009 Toyota Prius.
This process should be similar on the following vehicles:
2004 Toyota Prius
2005 Toyota Prius
2006 Toyota Prius
2007 Toyota Prius
2008 Toyota Prius
2009 Toyota Prius
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obqx/1AXAA00013
• 10mm Socket 1aau.to/obiZ/1AXAA00017
• Trim Tool Set 1aau.to/oagY/1AXXX00006
• Needle nose pliers 1aau.to/oE4/1AXAA00051
• Needle nose pliers 1aau.to/oE4/1AXAA00052
• Side Cutters
• Ratchet 1aau.to/obHU/1AXAA00016
• Double-Sided Tape
• Gloves 1aau.to/oamE/1AXSS00048
• Sandpaper
• Heat Gun
• Magnet - Extendable
• Pick 1aau.to/oSn/1AXAA00037
Subscribe: kzbin.info/door/WCdsftsTqYMO7cA_5Sc-yA
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@mattmaldonado880]

Perfect video helped me a ton! Bought mine off of amazon for $37. Don't have the fancy powered wrench but I was able to get a small wrench in there and twist it off slowly. After about 3 full turns you can just take off the bolts by hand. Also was able to get the back cover off fairly easily by just wedging my fingers inside the plastic and pulling down. Removed the old logo with a hair dryer and box cutter and attached it to the new lift gate handle with gorilla glue. Went with the chrome lift gate handle and it looks OEM. Thanks for your help!

[@bleppin]

Thanks for the great tutorial! I was able to fix my husband's car after three years of not being able to open the hatch due to a cracked fascia and gummed-up handle. Your video was super clear.

[@TRQ]

+@bleppin Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts! 1aau.to/m/Shop-TRQ

[@ukuleleplus3416]

Thanks for this- Followed your video step by step and replaced my broken liftgate handle. Wouldn't have known how to do it otherwise, thanks!

[@chereenellis8018]

Thank for this video. I sincerely appreciate this

[@TomSawyerRocks]

Mine snapped off and was dangling, so I had to cut the wires (didn't have many tools with me while out of town). Do you also carry the handle and button with wiring harness? Furthermore, while trying to remove the original button, I had a crummy philips screwdriver and completely stripped the screw head, so it would be very difficult to save the old button.