FREIGHTLINER CASCADIA 5 MPH DERATE BYPASS / SPN 5246 FIVE MILES PER HOUR DERATE SPEED SENSOR TRICK

[@alr9170]

My good man!!! I can't thank you enough, You save my ass. I was 350 miles away from my drop. After unplug it I was able to make it to Connecticut & get another load to go home to get it taken care of. Thank you thank you.

[@MsDadeCounty]

Life saver, was on the side of the road trying to find a slot. Came across this video, got under my truck and back on the road. Mine was really old and the sensor ended up breaking but grip pliers helping in getting the cracked pieces out. Thank you VERY much

[@TRUCKINGTIPSDIY]

nice glad it worked for you, thanks for watching

[@hwoldenigus]

Thanks sir, that is exactly what happened to my truck. You saved me some dollars from towing truck.

[@TRUCKINGTIPSDIY]

im glad it worked for you!! thanks for watching

[@thereviewer4173]

Very helpful tip. I forgot to use this last time I couldn’t drive over 5 mph.

[@TRUCKINGTIPSDIY]

Thanks you sir 🙏

[@abdellahabba4406]

Thank you my man. You saved my day. I made it out to the shop. Thanks again

[@alejo24681397]

Thanks for the video really life saver, I saw a video before about this but never mention that the whole sensor need to came out, people always say disconnect the sensor need it to be more specific a least for us the new drivers.

[@grmonkey0]

Thanks for your information. I got 2016 western star. This helped me. To get home 450 miles

[@an4709]

Thank you it works drove 145 mile to my home state

[@TRUCKINGTIPSDIY]

nice, glad it work for you!!

[@vqdobbleganger]

Good looking out on this vid. Definitely saved me a tow. With a gvw @ 96k lbs truck drove great, just a tad bit short on power up hills. Other than dat👍🏾👍🏾.... woke up to truck in derate no warning or anything.

[@ThatTruckinGamer]

Totally saved my ass from being stranded 1100 miles away from home. Thank u very much

[@cesarcastillo9561]

Did you drive that many miles?

[@TRUCKINGTIPSDIY]

Thanks for watching sir

[@TRUCKINGTIPSDIY]

You can drive it but its going to lose some power up hill

[@c.knoxville5998]

Essentially, none of those sensors needed for the truck to run properly. All of the sensors are added as the law requires them for public concern. The engine can and will run properly with and without the sensors. Sensors are only indicators and they keep things within the reading which set out by the law.

[@johnysilver1853]

When my sensor was bad speedometer stopped showing speed and engine brake wont turn on. I have manual 10 speed transmissio.

[@c.knoxville5998]

@@johnysilver1853 the reason for that, as you may know, that the software that controls and monitors the sensors are designed in this way. They are interconnected through the software. I got a new Volvo from Ryders which was fitted with the early collision warning in the front. In city drive the constant beeping drives you nuts. So I disconnected it. Immediately engine check light came on with service requirements. Of course nothing was wrong with the truck, only the software created this "ghost fault" response. We couldn't get it unchecked through the software for insurance purposes.

[@christinanomah8754]

Fuck these laws they don’t run this country we the people Do👴🏻

[@shakier23]

Chu. U hhhhh🎉🎉hvg

[@arnethahicks9100]

Thank you so much! This got my Driver off the road until we can get to the shop. 🙏🏾🙏🏾😊

[@TRUCKINGTIPSDIY]

Im glad this video worked for you guys thanks for watching

[@AbrahamSalem-m6j]

Hello Pedro , I enjoy watching your videos and i learn a lot ...I have a 2020 Freightliner Cascadia 116 with a DD15 ,675000 miles 13000 engine hours.My problem is that the Engine fan stays on all the times . It seems to have a viscous electric fan instead of a clutch fan unit.There are no code on the dashboard but the engine light is on ( not the service engine light).I checked all the connections nothing is out of ordinary. I cleared the engine light off the dasboard and drove it for over 300 hundred miles the fan still on and the light came back on .I noticed that the truck is using more fuel and less engine power.I even took it to the Freightliner Dealer they diagnosed it but they couldn't find no problems or no codes. What do you think the problem is ? Shoult I buy new fan and replace it or what else am missing here ???

[@truckergangvlog5727]

I watched this video for 5 times to undertand what did you do and what happened on the road. It's a super good way to drive home to fix.

[@TRUCKINGTIPSDIY]

Thanks for watching sir 🙏

[@jianzhaozhang2734]

刚哥可以啊

[@mrscheeksmoe1805]

Hey did you ever figure out what size socket or tools you used to remove the bolt?

[@remaininganonymous4422]

Quick and to the point! Thank you!!!

[@TRUCKINGTIPSDIY]

Thanks for watching sir 🙏

[@wonderman8085]

I have Freightliner Cascadia with Cummins engine with Eaton trans. I unplugged the speed sensor and nothing worked. Do I need to remove it from sitting?

[@thenomadicnerd6139]

Thanks for the tip! Just saved me a tow! However, not sure why this didn't happen to your truck, but my cascade was fighting me the entire way. It only allowed me to stay in 10th gear for 4 seconds before it cut power, I had to shift to neutral, then back to 10th to get power again. 1st-9th worked like a charm

[@TRUCKINGTIPSDIY]

Thats crazy never heard of that happening, 9th gear its good enough lol, thank for watching sir 🙏

[@thedieseldiva1844]

❤❤❤

[@paulb.5497]

Same with mine. All gears worked fine once shifting to 10th it will cut off. However I was happy doing 55-60 in 9th😊 The truck is a 2016

[@TRUCKINGTIPSDIY]

Lol nice!!!

[@wicheltruckllccompany795]

i have a cascadia 2016 with a dd15 and dd12 automatic transmission and i see it and it doesn't work for me what can i do?

[@cryptosavedme9576]

This video just saved me a tow appreciate ya bro

[@TRUCKINGTIPSDIY]

im glad it worked for you, thanks for watching sir!!

[@prabhjeetsingh9505]

It works!! Thanks 🤩

[@JaGem2007]

How does this problem eventually get taken care of when the truck is taken to the shop?

[@DavidJ909]

Good Video. Thanks

[@mengmengleo]

2016 freightliner cascadia automatic transmission is it work? I try to disconnect. But still 5miles

[@ibrahim_siad]

Me too

[@keepontrucking908]

I'm having the same issues right now I just did exactly what you did but I still got the same issues it didn't do anything different I'm doing 55 miles an hour with that cruise sensor on and with off the cruise sensor off and my dashboard speedometer is still working even if I disconnect the sensor still works it's 2022 I'm guessing they got the sense in somewhere else or something else but it's the def thank you for the info I tried it

[@sonxairasakhamdee2178]

Again good stuff bro 👍🏼

[@TRUCKINGTIPSDIY]

appreciate your support!! thank's

[@artemwashere6103]

I have 2017 cascades but I don’t see the sensor there Can u tell me where is it in mine?

[@micahreese982]

Thanks for making this video. I just disconnected mine, hope I can get home too.

[@TRUCKINGTIPSDIY]

where you able to drive home?

[@micahreese982]

@@TRUCKINGTIPSDIY have not gotten the stop light yet still just flashing DPF. But I moved that sensor so I'm ready still have 1500 to go till home

[@micahreese982]

@@TRUCKINGTIPSDIY nope right after red light came on truck shut down will not run at idle in parking lot let alone on road

[@micahreese982]

@@TRUCKINGTIPSDIY jammed a paperclip in the override button that keeps it moving

[@micahreese982]

@@TRUCKINGTIPSDIY made it home today

[@JosePolanco-my7nb]

Thanks nice and clear info

[@superlove1915]

Thanks bro good info👍. New to the channel

[@TRUCKINGTIPSDIY]

thank you for the support!!!

[@N5XBEVST]

Does this wok on freightliner m2 106?

[@kofibabone725]

Hero

[@Redpilllllllllllllllllll]

This work on 2017 freightlner cascadia dd15 automatic?

[@cazalandre8432]

I have a 2012 cascadia automatic.. where is the speed sensor located on an automatic? Please help

[@HoopLife313]

Any luck… I have 2014 automatic

[@vb1696]

Sorry to bother you do you know why is not working for automatic transmisions?I have a freigtliner cascadia 2018.

[@TRUCKINGTIPSDIY]

Hello, yea is not gonna work on automatic transmission

[@kevinphaysouraphong5131]

Question will i be able to finish my work week without it and then get it to the shop to get fix i go to vegas and back to California just 3 more days of work will i be okay m

[@TRUCKINGTIPSDIY]

Thats up to you, you will lose some power when going up hill

[@TheRealBigKuntry87]

I replaced mine but it is still showing up on my jpro causing my engine light to pop on and my speed hand bounces from 5-25 mph while sitting still….anybody know how to fix that?

[@Mr2sidewink]

I have a 2015 cascadia with this issue right now but I don't know where the sensor is located

[@adiletbai]

Can i do it on automated trans folks?

[@JulioM-w5v]

Is there a fuse to cancel the speed sensor?

[@sport016]

hey guy anyone know how can i get more speed when the governor is lock for the company. any program so I can reach in the computer of the truck?

[@rbell2068]

Thank you so much you really helped me with this video!

[@TRUCKINGTIPSDIY]

Thanks for watching sir 🙏

[@ehabmasaad8585]

Where is the transmission speed sensors on 2017 freightliner

[@cfubonecollector]

My truck wont go over 5MPH, what was the cause for that truck to do that? Thanks for the information.

[@TRUCKINGTIPSDIY]

do you have any spn codes on your dash, probably DEF problems

[@cfubonecollector]

DEF has been deleted and has been running good since, cab33 code. Thank you for the response

[@Ohmtrans]

@@TRUCKINGTIPSDIY hey I'm getting spn 2631 fmi 1 I replaced delta sensor and I've checked for air leaks any idea on what to check for that I missed

[@blackhorse009]

Which year freightliner will it work ?

[@alishafqat3160]

I have volvo 2004, speed sensor is expensive about $400. What about if I clean and put back will it work?

[@foreveralwaysyourstruly4338]

Good job, bro.

[@raptor4eva]

Really wanting to try this but don’t want to ruin anything on a company truck or get red flagged. I use to do the key trick To bypass governor but got old turning key on and off. Tried key truck on the ten speed and three pump acceleration and was a no go. I’m in a 2020 automatic and tried the three pump acceleration and it worked gave me 5mph or so extra bump truck was governed at 68 cruise resume bump to 70 then pedal truck to 73/74 funny thing is I wanted to see if key trick would work by turning it on and off And it failed well I tried going back to working pedal bypass truck and it stopped working smh do you know why this happened??? Did I Flagg the module ecm or something

[@TRUCKINGTIPSDIY]

hello, im not sure, why that happened, but you can this this hopefully it helps you

[@weykip3260]

Can this work for auto trans?

[@TRUCKINGTIPSDIY]

No

[@jonathanf1819]

Hell yeah bro much appreciation

[@TRUCKINGTIPSDIY]

glad it worked for you thanks for watching

[@jorgefacio690]

how far can you drive like that?

[@titomontano7231]

diego i wish I could see your video yesterday I have same problem yesterday I didn't know what to do same problem 3 check engine lights on plus def flashing yellow light instill now mechanic don't know what the problem is what was your problem can you please tell me

[@ag8499]

Cruse control will work?

[@TRUCKINGTIPSDIY]

no the cruse control wont work

[@LHSB]

I have a 2014 DD15 automatic. Can you tell me how I can get going so I can at least make it to a nearby shop? Thanks in advance.

[@HoopLife313]

Did you have any luck with it? Same truck same issue

[@dibrahim6287]

I have 2014 freightliner I removed that sensor but doesn’t help still 5 mph

[@cesarcastillo9561]

Did you get it to work?

[@enoch7132]

That’s some good advice bro thanks

[@TRUCKINGTIPSDIY]

thanks for watching sir!!!

[@videoexitos]

ITS GOOD IDEA TO SAVE MILES IN MY TRUCK. 😉👍😄👍

[@randydalgobbo6470]

Nice vídeo, helped my friend

[@Jamie-julie]

Enjoy your videos

[@polite-w4p]

Why I can’t see my speed sensor 😢. 2016 FTL Cummins isx 15

[@TRUCKINGTIPSDIY]

It has to be manual transmission

[@polite-w4p]

@@TRUCKINGTIPSDIY my truck is automatic

[@fireboy123123]

hey bro I have a freightliner cascadia 2018 how do i do this on that?

[@TRUCKINGTIPSDIY]

i think it sould be the same thing, let me know if its the same!

[@bencuevas4272]

So that message when red engine stop signal comes.stop the engine to avoid damage will disappear.

[@josedeleon1573]

Also, your miles don't go higher. Miles are the same until sensor reconnected

[@staticmodemedia6799]

Does this work with the d12 auto?

[@TRUCKINGTIPSDIY]

No

[@usdpaulp]

Does the engine lose any power w that derate? Can you still go up mountains with a load if you pull the sensor?

[@TRUCKINGTIPSDIY]

yes the truck does lose a little power, i was loaded and could still go up hill

[@usdpaulp]

@@TRUCKINGTIPSDIY that's awesome news.

[@jorgerodriguez6470]

Good Video 👍

[@TRUCKINGTIPSDIY]

Thanks for watching sir 🙏

[@mattabraham3549]

So with the STOP engine light on, the rev limiter still prevents from accelerating. I removed the speed sensor but still cannot proceed. Is it possible to do a similar trick to rev limiter?

[@5.43v]

Auto or manual?

[@mattabraham3549]

David Devine manual

[@Machetee90]

I got the same issue

[@mattabraham3549]

Diego Avila hopefully you’re at home! Otherwise idk what to tell you. I ended up getting towed 40 miles that time

[@Machetee90]

@@mattabraham3549 damn . I’m waiting for the tow truck 😭😭😭 I was hoping this trick would work to get me home 200 miles

[@marcoreus3074]

Is it possible to do the same with 2018?

[@TRUCKINGTIPSDIY]

Im not sure, it has to be manual transmission

[@parminderjitsingh3096]

Brother 2019 frightliner cascadia hands up . I did not find this on . I see 2 sensor there. I don't no wich one speed sensor

[@TRUCKINGTIPSDIY]

It hast to be automatic transmission

[@thereviewer4173]

Mine was difficult to pull out. I had to use a flat pry bar. I also needed to sand the inside very well so the sensor could slide in easily. It was much more difficult than I thought to replace!

[@TRUCKINGTIPSDIY]

Yes sometimes it gets stuck with the corrosion, thanks for watching sir 🙏

[@vincentanderson3676]

What was the problem when all those three lights were on

[@TRUCKINGTIPSDIY]

it had the nox nox efficiency, and the low quality DEF codes

[@vincentanderson3676]

What was the fix

[@vincentanderson3676]

I’m getting a code heat line 1 spn004354

[@bittusinghal21]

I got same problem today you think it can work on 2015 cascadia?

[@TRUCKINGTIPSDIY]

I think it should work, (not on automatic)

[@frmiguelsonphanor3337]

My truck is governed if I removed the sensor my truck will be ungoverned unlimited speed???

[@TRUCKINGTIPSDIY]

No, you would also lose some torke

[@frmiguelsonphanor3337]

Ok thx bro

[@juanarevalo8791]

Does it record miles traveled?

[@richardgeister5423]

My truck debated to 55 then the next derate to the throttle away and removing the sensor did not help

[@yasseralbayati632]

Is this for dt12 gear?

[@TRUCKINGTIPSDIY]

No its for a manual transmission

[@jalenjamellable]

What about for automatics

[@marcoreus3074]

What year was your truck?

[@TRUCKINGTIPSDIY]

2013

[@vasylivanych]

Appreciate that 👍👍👍

[@gabrielcastro8710]

Do you know if this trick will work an automatic transmission too??

[@TRUCKINGTIPSDIY]

i think it sould work

[@cazalandre8432]

did you find where its located on your automatic?

[@amitrangi8580]

hie everybody, can someone tell me if we remove the speed sensor in freiginer 2017-2020. will the truck go to repair shop ? please reply. thank you.

[@amitrangi8580]

i am asking about the automatic truck. if somebody can tell me. i will be very thankful

[@TRUCKINGTIPSDIY]

I dont think you can do it on automatic

[@RobertoGonzalez-t9p]

Did this work on automatic transmission?

[@TRUCKINGTIPSDIY]

No only manual

[@jeetadhillon9637]

Thanks bro good video

[@TRUCKINGTIPSDIY]

Thank you for watching sir 🙏

[@HS-qw2hg]

How many miles long can i drive taking it out

[@TRUCKINGTIPSDIY]

For long as you want, is not going to have the same power, but just so you can get back to fix it

[@RADIORAHEEM402]

What size bolt was that. Or what socket did you use to remove

[@TRUCKINGTIPSDIY]

i will double check and let you know

[@mucaco0074]

Thank you

[@davidfs.6233]

Thank you for the heads up I just had to do that today about 3 hours ago my truck de-rate at 5 miles per hour I climb underneath the truck disconnect your speed sensor they ever get to the terminal thank you

[@TRUCKINGTIPSDIY]

nice, im glad it worked for you!!

[@realistmw]

If the filters are clogged will blow ur motor after a while

[@robinsingh5738]

How far can you drive without speed sensor and does it harm your truck engine bro?

[@TRUCKINGTIPSDIY]

you can drive it any distance, its not going to have the same power, i dont think it harms the engine

[@robinsingh5738]

Thanku so much brother. May god bless you and your family.

[@power-atlantictransport]

having the same problem disconnected goes down the road great except 10th gear after 5 seconds i lose the peddle if i put in neutral rev up put back in 10th it goes another 5 sec and so on all other gears don’t lose power at all

[@calproc8140]

Removed speed sensor didnt work still going 5mph help??

[@mattabraham3549]

Cal Proc Did you have 5mph derate already when you tried this trick? My 2013 has a rev limiter on it in addition to speed limiter. I couldn’t apply any throttle even in neutral

[@turboteknika]

I unplug the sensor but still doesn’t let me drive any more than 5mph. Please help how to do it!

[@turboteknika]

I disconnected the sensor also I removed the whole sensor so it doesn’t touch with the transmission but still I didn’t get any results.

[@TRUCKINGTIPSDIY]

what year is your truck

[@turboteknika]

TRUCKING TIPS DIY 2014 freightliner cascadia dd15

[@5.43v]

@@turboteknika manual trans?

[@turboteknika]

David Devine yes it is Eaton 13 speed manual

[@plarkpa7344]

Thanks sir 🙏🙏🙏🙏

[@pfoxhound]

Does it work for automatic transmission?

[@TRUCKINGTIPSDIY]

yes it should work

[@josebeltran4737]

It work's yes but it you are running with ELOG it doesn't star automatically when you start driving make sure to put your log book to drive before you start driving but it does work running 75 miles per hour 😂😂 thank you brother hasta la vista baby

[@antoniomanuelmanjate646]

Whatsup brother thanks allot...I have Detroit diesel V8 km it's not engage helpe

[@TRUCKINGTIPSDIY]

hello, wat truck you have, whats not engaging?

[@antoniomanuelmanjate646]

I'm from Mozambique Africa Indian Ocean. it's fire fighter truck. Detroit diesel V8 engine 💯 kenw

[@5.43v]

@@antoniomanuelmanjate646 sounds old

[@imadahmmad1965]

Good job thanks

[@TRUCKINGTIPSDIY]

thanks for watching

[@harryvirk8481]

Does the stop engine light really stop the engine after removing the sensor? Because right now when I’m driving it shuts down the engine after a while.

[@TRUCKINGTIPSDIY]

you need to leave the sensor plugged in, just out of transmission

[@Smiskifan4l]

How far you drive like this?

[@TRUCKINGTIPSDIY]

you can drive it any distance

[@Smiskifan4l]

Thank you for response. Trying to make it home.

[@TRUCKINGTIPSDIY]

just, wondering were you able to make it home?

[@stratefacts9075]

My truck just shut off n all lights are blinking....just disconnected the sensor.....hopefully I can make it home ....smh

[@danielcarreno2603]

I tried doing that same procedure to a 2017 cascadia and it wont go more than 50

[@mikefinley9111]

I took mine off and still speedometer went up when I moved. 20 model

[@JaspreetSingh-qs7jn]

how many miles we can drive without speed sensor??

[@TRUCKINGTIPSDIY]

Any distance, but i only did this to get back home or a shop, the truck will lose power on the hills