CBC Model 151 32-20 & 12g

Brazilian made CBC Mod 151 chambered in 32-20 and 12g shotgun. At 3:55 I blow the gong off its swinger with a 12g slug!
These great little guns suit those on a budget but like to have enough gun to get the job done. Marketed as CBC in most countries and & K-Mart in the USA. The 32-20 is fitted with a Marble Arms rear sight and is a great little shooter when I do my part.
Who would have thought that a 1oz 12g slug would send my gong flying in the air like it did!
Please share and subscribe to the channel and also check out www.thefirearma... for more firearm goodness!

[@gustavozaz]

São armas brasileiras, ainda há muitas destas nos sítios do brasil, porém com as politicas desarmamentistas os poucos estas armas estão sumindo. são ótimas armas, robustas e de grande qualidade, parabéns pelo vídeo!

[@trumpychris]

Muito obrigado

[@carlosmerlin8727]

I have a CBC 151 in caliber 12. They are very good. Even by the most demanding American standards, single-barrel models are durable, robust and accurate. Now they started manufacturing a pipe again here in Brazil. The so-called ``monotyro ´´ But they are not as good as they were even in the 90s.

[@TheNSFisher]

These were pretty common here in canada. They were marked C.I.L here as they were imported by Canadian Industries Limited.

[@ronmcgovern6581]

I had one of those shotties a few years ago. Totally reliable. Don't know why but I sold it, like an idiot. A lot of hares and rabbits when down under that barrel loaded with Number 4 shot. Great gun. Three the empties into next week if you snapped it open quick. Thanks mate, brought back some memories.

[@snipehunter795]

12/18/2021 Illinois, USA I just bought one from a store for $120 in "almost new" condition. Between this and a Hatfield, I chose this. I already have a Hatfield. I bought it last year.......Hatfield has it in their shop with thousands of others.

[@Daniel_Alavarce]

Beautiful CBC I have a CBC 32-30 Model 611 Rare in Brazil

[@calebeelias645]

Vídeo bacana amigo!!! Nos Brasileiros vivemos uma situação triste vocês só podem ter as armas fabricadas aqui e nós não!!! Até às facas querem criminalizar uma vergonha,certos políticos corruptos,o estados geral em que se encontra a polícia nacional,eu ainda gosto muito de facas,pelo menos isso ainda podemos ter!!! Like e inscrito no seu canal!!! #BOLSONARO2018!!!

[@trumpychris]

obrigado amigo

[@timknickel7756]

I had a 12ga one when I was a kid I sold it. I'm looking at another one at the gun store. Great memories

[@therealdaddychew]

They look good for the left-handers, and ejector a definite bonus :D

[@trumpychris]

Great and affordable, so much fun.

[@lexxmason4867]

Just bought one in 16 gauge and it's a beautiful piece

[@ericktamberg670]

The rifled version was made in .22 LR, .32-20 Winchester and, for export sales, also in .22 Hornet and .30-30 Winchester. The smoothbore had law enforcement/military versions. 12-gauge with short barrel and bayonet lug (riot gun) and a special .410 version for Brazilian Air Force, to be used as a survival gun by downed pilots in Amazon Jungle.

[@mkshffr4936]

Love the little 32. Envious. My guess is it would be fine with loads up to .30 carbine equivalent.

[@celsohenrique5289]

São armas muito boas cbc é cbc depensa comentário show de bola

[@oldairoliveira5193]

Eu adoro cartucheira cbc é às melhores qui tem

[@guameldestruir6239]

I do wonder if the receivers are interchangeable with these and if you can swap the fore-ends with out harming them. I only have the 20 gauge version but seeing the rifle one peaked my curiosity of having two barrels and one receiver for both

[@dalanwanbdiska6542]

Im going to look online and see it they make single shot 25-35. My buddy has a old winchester lever rifle and its in 25-35 and he said its a carbine model, shorter, he also has the original saddlering octagon barrel 25-35 but wants 1700$ , $750 for the 25-35

[@wagnerbarbosa8351]

Boa meu amigo só apaixonado pelas espingardas da marca cbc.

[@wagnerbarbosa8351]

Thank you

[@EdilsonSantos-ft7un]

@@wagnerbarbosa8351 com

[@hilmarsantana1502]

So armas de primeira vídeo ótimo

[@glennmelon16]

I brought one in 410 - 22Hornet two barreled combo.

[@glennmelon16]

They were sold as a combo with matching serial numbers on the action and barrels.

[@siciliancapeverde4646]

Great video brother. Hello from the U.S.

[@trumpychris]

Thank you Joe!

[@marcelenduro3009]

Hi, I'm taking a chance here. But I recently bought one, is your 12g choked at all? Mine is full choke so I don't think I'll be able to shoot slugs but that gong shot was very impressive. Thanks for the video.

[@TacticalTerry]

I think you are correct. Ideally you would use a choke between modified and cylinder bore. Enough slugs through a modified choke apparently opens the constriction a bit by mashing on the choke internal surfaces. I recently found one in full choke also. Considered making it a squirrel gun for the upcoming season.

[@davidwicks2356]

The shotty looks great. I also make my own slugs and shoot them out of an adler interchangeable choke. Question, what slug mold are you using and do you have them in a wad. interested about the barrel choke vs the slug width. great vid mate!

[@ericktamberg670]

Brazilian hunter Lairton Goulart (former mayor of Bertioga city, where Nazi criminal Josef Mengele died by drawning) killed a black bear in Canada with a CBC .32-20 rifle in 1991.

[@leandroramosfurtado945]

Kkkk ainda existe bala dessa 32 20

[@raimundoraimundo4726]

As armas cbc de hoji tem baixa qualidade essas antigas eram especularis

[@jakewilson6500]

I own a cbc model sb 12ga with a 3in modified barrel and I was wondering if you knew if I could shoot slugs through it

[@trumpychris]

You're saying the barrel is 3" long?

[@jakewilson6500]

@@trumpychris no it's a modified model that will fire 3 inch shells. It came from the factory modified.

[@dalanwanbdiska6542]

Sure it shoots slugs. I wouldnt shoot them through full choke

[@Oldman899]

@@dalanwanbdiska6542the cbc single shot has a full choked barrel.

[@josenunesdonascimento6611]

E uma arma %%%pra qualqer caça segurança edcts

[@countrylife8347]

I want FIe 812 rem 12-gauge 30in Cylinder bore

[@go911boy]

I have one in 410 ga.

[@FelipeGomes-dq7cc]

Essa lie maldita tem q acaba, BOLSONARO agora é com VC!!!!

[@TheDunzweiler]

If you know of any butt stocks/ butt stock bolt for the 12G mail me back, I'll pay for shipping.... Ive had this model 12g for 3 yrs and cant find a butt stock....

[@trumpychris]

Check with Bruce at Wattle Grove gun shop. He has all kinds of bits and pieces. He takes a lot of it to the gun shows. Or Ron Owen at Owen Guns in Gympie.

[@falutinfree1101]

Come back to periscope.

[@trumpychris]

I shall. Just been working on a few other projects Perhaps in the next few days I will jump on.

[@aldemarmoreira9680]

Queria te um desses arma

[@lucasreis3542]

Você pode falar qual as medidas da mesa dela por favor???

[@Stratocaster893]

What up?

[@trumpychris]

Not much mate