#238

[@wakkowarner7391]

I think an honorable mention is in order to Yaesu for actually supplying a programmable part. Not many manufacturers do this and the faulty equipment just ends up as scrap. Well done to Peter as well of course.

[@TRXLab]

Yes you are right as we have a lot of issues with getting parts these days!!

[@highpwr]

As usual Peter I am honored to have the pleasure of being able to watch your work and follow along with your choices of diagnostic steps and methods. Thank you for sharing these videos and the education that comes with them. I only wish I would have discovered your channel and Buddy's many years ago.... 👍

[@TRXLab]

Thanks for the kind words

[@billnicholson2470]

Great repair Peter. Amazing how you work with those tiny components. Thanks for sharing.

[@TRXLab]

Thank you

[@TheRadioShop]

Awsome save of this radio Peter. I agree with replacing all those components, just never know what is damaged from electrical storms. As always thanks for sharing.

[@bblod4896]

Hi Buddy 😁.

[@TRXLab]

Thank you Buddy. Yes replacing suspected parts is all you can do in those cases..Thanks for stepping in my friend. Take care

[@SteveMasonCanada]

Hi Buddy! Haven't seen a repair video from you for a while, hope all is well with you and your family!

[@TheRadioShop]

@@SteveMasonCanada Steve, just uploaded one. Been real busy here but things are getting better.

[@kenanshobbies9970]

Amazing to watch you troubleshoot, Peter. I am nothing shy of impressed watching your thought processes in action on this one. Great job getting this radio back on the air.

[@marcelobahl7655]

The work done in this FT857 was very good, and the explanations help a lot to understand the reasoning to reach the component responsible for generating the defect, but it is not enough to have modern and state-of-the-art equipment if you do not have the knowledge you have. Congratulations on the beautiful work done on this FT857. Big hug and recommendations to family and thank you

[@TRXLab]

Thanks for you feed back and yes of course you are right...

[@GaryLordsWayMinistry]

Last time we had this condition it was the processor chip that was out due to static discharge of an ungrounded repair attempt by the owner. Great repair work, I wish I had the tools you do for such repair work most of all my repair work in on old style analog with bigger components, I wish I could do the MCU and CPUs on my boards that come in needing repair work done to them as you have done here. Saved that person a lot of money.

[@davequick3373]

I wish we had someone like you in the US. You’re ability is nothing short of amazing! Thank you!

[@TRXLab]

Thank you Dave!

[@TheMaddogronh]

Thank you for another fine video,, this one was a two cup video !! It sure is a nice way to start the morning. Thank You.

[@TRXLab]

Okay two cup video lol. Thanks for watching

[@philkennedy342]

Fantastic work. It’s always fascinating to watch you at work thanks for sharing 👍👍👍

[@TRXLab]

Thank you

[@stevegriffin9552]

WOW!!! What a fantastic video and repair job on the 857. You are an incredible technician. To repair all those very small parts plus the MCU I can’t imagine how much concentration that took. And helping the person to get his favorite radio back to him. Like so many people have said it is an honor to watch you work. Thank you for a wonderful video, I do hope you have a wonderful day and stay safe. Hello from the Texas Hill country. 73 WD5ENH Steve

[@TRXLab]

Thanks for your kind feed back! 73

[@bobve7ezi370]

That was absolutely magnificent, I had an induced lightning surge kill my 857, after the warranty had expired. I sent it off to Yaesu for repair and the just stuck a radio in the case, and returned it to me. I think it cost $500, but I was unwilling to just scrap it. They did return the old board to me. If I ever get the courage up to troubleshoot and repair it sometime in the future, this video would be a very, very good tutorial. Realistically, I don't think it's ever going to be done, but it _would_ be interesting to know what's wrong with it. BTW the thermo-imaging camera app is a wonderful tool -- I had no idea it existed!

[@mattwells1209]

The skill and attention to detail is just amazing, thank you for sharing your skill full work with all. 👍

[@Joe_HamRadioGuy]

Nice save Peter. Great repair job as always. Thank you for sharing it with us. 73

[@TRXLab]

Thank you

[@RGB06084]

Great stuff Peter. Thanks for what you do here Sir!

[@TRXLab]

Thank you

[@hancecrawford]

Peter blown it is amazing you can work with such tiny components , I remember 1 time my Video recorder got hit with lighting was very lucky a Cap was blown to pieces great repair Peter :)

[@TRXLab]

Thank you

[@45AMT]

Wow! Quite excellent job there Peter! A really enjoyable video! Thanks for sharing this repair with us all!

[@TRXLab]

Thanks for watching!

[@iw0hex]

Great job to solder this chip Peter, compliments. 73s Pasquale IW0HEX

[@TRXLab]

Thank you my friend! 73

[@alessandrozax]

Perfect Job Peter as ususal, this kind of problem is a nightmare everytime !! ..Have a nice WE

[@TRXLab]

Yeah you are right it is a nightmare...Thanks for watching

[@hectorpascal]

Very nice repair job, Peter - "shotgun" servicing is a real gamble 50% of the time! Personally, I would always have first chased down the extra 32mA current drawn. The heat camera is SUCH a useful tool for diagnosis - but SO expensive!

[@mikebond6328]

They’re getting cheaper as more people buy them.

[@mikebond6328]

Thermal cameras that is.

[@TRXLab]

That might be right but as I said we had also power supply values out of specs....

[@hectorpascal]

@@TRXLab Yes indeed,... but I generally don't like the hassle of pulling out SMD parts unless I understand their failure mechanism. Chasing a solid current error just "feels" easier. Nevertheless, another job well done!

[@fredshead3956]

Incredible Peter, i wouldn't attempt that in a million years...

[@TRXLab]

Thank you

[@SteveMasonCanada]

Fascinating fault! I would have guessed that it was a partially blown discrete component, that worked until under load. I'm not normally a fan of the "shotgun" approach (replacing a bunch of components) but agree with Buddy, a good idea given the cause of the fault was from an electrical storm. Love your videos, thanks for sharing!

[@TRXLab]

Yea so it is...Thanks for watching

[@John_Smith__]

When I read Thunderstorm I thought instantly ..Oh this is going to be a Great repair! Awsome!

[@TRXLab]

LOL yeah that is always something special LOL. THanks

[@Radiocruncher]

What a great video Peter and a real journey. I’m really struggling to get spares at the moment and seem to be paying a lot more for them as well. Another superb piece of logical fault finding and a tricky microprocessor to swap out as well. Very well done. Regards Graham

[@TRXLab]

Thank you Graham! Yes spare parts is a nightmare.. Take care

[@mikefinn2101]

Peter simply Amazing job Excellent Job super learning Video for me. I am so impressed. Your the best I don't think Yaesu could have done better. You're one of the Best of the Best most important most people would not share their wealth of knowledge. I Love to watch TRX Lab videos trying to watch them all. Many Thanks

[@TRXLab]

Thank you Mike!

[@pasixty6510]

Great job, Peter! One comment only… when you 45:20 clean the tabs using solder wig, don‘t swipe the wig over the pads. Just wipe the iron over the (not moving) wig. The wig sucks all the solder from the pads just by the effect of adhesion, caused by the heat and flux applied to it. If you move the wig, you risk eroding (and /thus/ damaging) the pads.

[@TRXLab]

Never had issues with ripped pads but will try your method. Thanks for comment

[@Roberto.P]

Always a good job! Many thanks for sharing!

[@TRXLab]

Thank you

[@jacoleroux5569]

This is a very good video, but I had the same type of damage on my FT857 but mine still worked but the audio was very bad, I sent the radio to our local Yaesu Dealers and it took them 2 years to just give me a quotation for repair, they wanted to replace the entire main board and the cost of that was more than the cost for a good second hand / used radio. Since then I will never buy a yaesu radio ever again as the support was very bad. Thank you for your video just sad I only got to watch it around a year later... keep it up.

[@karlfell3768]

I have recently invested in a thermal camera and I have to say that it is a real game changer for electronics fault finding. Fantastic video as always Peter.

[@TRXLab]

you are right that is a game changer for sure. Thanks for watching

[@su1ie472]

I would like to thank you for the great video, I am very grateful for this wonderful work. I also have almost the same problem, which is a static shock through the electricity input, and I really want to repair the radio.

[@M5AXA]

What a great video, loved the 3 month older comment which was very funny and unexpected. Very skillful hands in replacing that processor. I also have a 857 which can be challenging with so many menu's and sub menu's but wow! what a great little radio. Thanks Peter and have a great weekend. de M5AXA (Ian)

[@TRXLab]

LOL yes it is a pain to get all the needed components these days...Thanks for watching

[@danielhowiesr.2593]

Another nice save, Peter. Great job!

[@TRXLab]

Thank you

[@drdev8594]

Vielen Dank for this educational video and also for keeping another fox tango 857 on the air!

[@TRXLab]

Thanks for watching

[@rogersmith2158]

I enjoy watching you work, very good information

[@bblod4896]

Good job Peter. EMP/Static shock takes out components with no exterior signs; a pain in the butt especially since both sides of the PC board are populated and testing is difficult. Thanks for the video.

[@TRXLab]

Yes you are right it is a pain in the butt.. Thankless for watching

[@BoB4jjjjs]

As always, a brilliant job well done. :-))

[@TRXLab]

Thank you

[@garyrobinson8991]

Very professional repair ! Kudos, well done. 73’s, WB8ZGV. Gary

[@TRXLab]

Thank you Gary

[@propagating-radio]

Another great video! Thank you for sharing this.

[@TRXLab]

Thank you

[@grantfullen9559]

I all ways enjoy your videos Peter. Nice Job

[@TRXLab]

Always good to see you Grant! Thanks for stepping in

[@alanbean305]

Man!! you are something else indeed.THANKS AGAIN!!!!!! Alan.

[@TRXLab]

Thanks Alan

[@robertrainey1728]

Another great repair Peter.

[@kevingray707]

Thanks for the video. The massive part replacement understood but probably lost some of the learning value. Also wondering if we could have used a scope and probed the cpu to verify it was the the problem. Would have been so interesting. Also the work on installing the cpu would have been so interesting. Such precise work. Your skills are outstanding. Thanks for another great video

[@TRXLab]

Yes you are right but I have always to cut out sequences in order to shorten down the video a bit. But testing a CPU/ MCU with the scope has been presented in may older videos already and it is always the same procedure...Thanks for comment and glad that you liked the video...

[@вечная_мерзлота]

probing cpu is useless. one needs to know the code/operation sequence. also u can't just buy a cpu and solder it on u need to program it first. and that is a lot of work. that's why u contact yaesu and buy it from them only. otherwise...

[@radiohamd3402]

Excellent success Peter. It reminds me of the video on the FT-847 whose CPU certainly had the same problem and which you couldn't fix. Finding a CPU with the right internal program is not easy. Well done and thank you for your videos!

[@TRXLab]

Thank you. Yes you are right. The assumption was a faulty MCU very early but the radio was completely tinkered so the risk was too high to put more work and material in....

[@samaitken5819]

you sound like my mentor with a german accent very easy to follow

[@TRXLab]

oh that must be horrible lol

[@enigmarbs2886]

Fantastic repair, Peter! It's always a pleasure to watch your videos... Viele Grüße Stefan DG4RBS

[@TRXLab]

Thank you Stefan!

[@ohyeawhosurpoppy]

Great save and documentation. My FT891 had bad final transistors, leaking power voltage, and now has audio with no S-meter. Think I found the issue, seems many 891 radios have weak parts.

[@TRXLab]

Thank you.

[@montygore]

I love being one of the first to see your new videos. Thank you sir

[@TRXLab]

Thank you

[@regularuser492]

Wow Peter, dass ist mein TRX auch.Ich schaue gern dein werk ! Danke Dir !

[@TRXLab]

Das freut mich, Danke

[@krzysztofkowalczuk5179]

Great repair Peter, as usual. Best regards de SP5KK.

[@TRXLab]

Thank you

[@M0XFXUK]

Nice video Peter and such clean work replacing the MCU. Did you have to adjust any of the soft settings after you fitted the new MCU? Also I am guessing the static discharge may have scrambled the firmware in the MCU EEPROM making it crash, it's lucky that you found a replacement that worked. Love the vids keep up the good work.

[@TRXLab]

Thank you John and good to see you. No all adjustments were fine after replacement of the MCU. Even I did not get a clear answer from Yaesu it seems the the firmware in the MCU is a kind of operating system while all the parameters are stored in the external EEPROM which was not defect and thus all was still there... Again glad that you liked my video...

[@jurgentraude4365]

Nice job again Peter! Thanks!

[@TRXLab]

Thank you

[@OleF112]

As i own a 857 by myself, i like to see this one here back in service. So you did a good job, Peter, and the risk of failing is quite high after a HV / ESD event. Did you use Chip Quik solder for MCU removing? It looks more like a normal soft one. As always, the vid saved my sunday morning. 73 de Olaf, lieben Gruß nach HE und bleib gesund!

[@TRXLab]

Danke Olaf, ja das Risiko ist hoch so eine Gerät nicht mehr repariert zu bekommen.. Ja es war Chip Quick und es funktioniert wirklich gut. Alles Gute und lieben Gruß! 73

[@dennisqwertyuiop]

great repair ,your the pro tech

[@TRXLab]

Thank you Dennis

[@charliem.9998]

yet another great job by Peter ... he is a genius ... 73s de DL6RDE / AA1KD, Charlie

[@TRXLab]

Thank you Charlie but a genius was Einstein or so

[@SuperGreenlaser]

great work Peter Take a bow!!

[@TRXLab]

Thank you!

[@aslerunarborgersen5175]

Hi Peter, another great repair from you, and we other learn a lot of things from you. But I have a question, when you solder IN that MCU - do you use a soldering iron or do you use hot air ?

[@TRXLab]

Thank you! I put the new MCU in by drag soldering no hot air was involved

[@extreme978]

Another great video, ive wached all your vids, several times over. 🤓

[@TRXLab]

Thank you

[@bruceweight7319]

Cudos to you, what a fantastic video. What type of flux do you use and what is the low temp solder and is the solder wick with or without flus? Fantastic to watch.

[@utubeaccess7]

Yes! Mine is in the same condition, cant wait to watch the rest of the video. (Mine was reverse-poled for a few seconds).

[@TRXLab]

Hope it helps

[@panagiotiszafeiriadis8425]

Great job 👍. Thanks for the lesson 😊

[@TRXLab]

Thank you

[@Subgunman]

Have the same radio, original production and not the D version. Very nice work in restoring this classic! Interesting service monitor you have on the bench. Is there any reliable source for such equipment in the EU especially used equipment? I have an IFR 1200 with spectrum analyzer and it no longer turns on. Shipping back to the states is out of the question, customs would charge me an arm and a leg when it ships back to me even though I would declare it to them before shipping out.

[@fredbos5997]

Nice! You've repaired it! It must be rewarding. I've followed you all the way. Interesting! See you later! Greetings, Fred

[@TRXLab]

Thanks for watching

[@johnwaldburger8822]

Another great video Peter. A lot of work to save a super transceiver. Could you tell me the manufacture of the ground clip and the probe tip for your multi meter. They look like they are very functional. Thanks

[@TRXLab]

Thanks. Test Probes www.sks-kontakt.de/en/test-measurement/products/product?nr=9723181

[@stevec5000]

This is a common problem with this kind of circuit design where there is always power applied to the processor even when the radio is off so it can be easily damaged by spikes on the 12 volt supply line. I'd much rather see them use a hardware power switch that actually disconnects the 12 volts when the radio is off.

[@fernandojosepompeo4421]

Dear Peter, congratualions for the explanations but next time please show soldering process of the MCU. 73 PU2PLL Fernando, Brazil.

[@TRXLab]

Thank you!

[@bruceweight7319]

One of the guys in the club walked across the room and grabbed the knobs on his 857 and got a static spark and killed his radio just like this. He had to send it back to the Yaseu to get it repaired and it was new just out of the box.

[@berndb.5097]

So spannend, besser als jeder Krimi ;-) You really have a steady hand and I can understand that you didn't film the soldering in of the MCU. Many thanks to you Peter 73 de Bernd

[@TRXLab]

Haha wie ein Krimi, freut mich das es dir gefallen hat Bernd..vielen Dank 73

[@Briqel]

Amazing video once again. What brand (or type) of flux are you using Peter because your soldering always ends up very nice and clean !

[@TRXLab]

Thank you. It is SMD291 By CHIP QUIK

[@KD0CAC]

Thanks again . I would think that it would be helpful for both owners of rigs & guys getting into repair - to have some idea of costs for the fine work you ? I have an FT-897 with multiple issues that I need to work on , did a couple repairs already , like the VHF / UHF filters that typically go bad .

[@aslerunarborgersen5175]

I had the filters on my FT.897 replaced, and when i got the radio back nothing worked. The radio wouldn't even turn on, but the guy who repaired it said it didn't work when he got it - but I am 100% sure it worked. So be careful.

[@KD0CAC]

@@aslerunarborgersen5175 Maybe your venting or something , but your reply has little to do with my commnet - except the idea of repalcing filters. Your comment should be a standalone comment - finding competent repair people , too bad you had a bad experience . I'll reiterate my point / question , not that Peter should , just thought it could help with added info - typical cost of repair - for both buyers & sellers . I would not be against some ideas from Peter on finding good help , but as I said - a comment on it's own .

[@TRXLab]

swapping the board which is what will be done on a regular basis these days is much more expensive...

[@aslerunarborgersen5175]

@@KD0CAC You asked about the cost for a great technician like Peter, and I just added my comment on what may happend if you go to a cheap "technician" - you can end up with a (more) broken radio. I maybe should have added "cheap" in my comment, but I thoought you could understand what I meant.

[@aslerunarborgersen5175]

@@KD0CAC Yes maybe it should be a "standalone comment" - but as I said, I just wanted to warn people against using cheap technicians. I don't know how much Peter will take for a repair, but he is worth every $ or maybe Euro. Take care, stay safe 73 LB5JG

[@PA2OLD]

Wow, fantastische Reparatur!

[@TRXLab]

Vielen Dank! Freut mich das es dir gefallen hat!

[@IMSAIGuy]

what low temp solder are you using? that makes it very easy to protect other items

[@TRXLab]

It is Chip Quik solder..

[@sebastianklemm3379]

Klasse Video danke das du die Arbeit mit der Welt teilst. Darf ich fragen wo man die schaltpläne in einer solch guten Qualität bekommt ich bräuchte Sie auch. Danke 73 Sebastian

[@johngulliver6151]

Another fine video peter, thanks for shearing

[@TRXLab]

Thanks for watching

[@jackofalltrades3727]

love your videos very informative hope you do many more

[@TRXLab]

thanks for your feed back

[@montygore]

Great job Peter.

[@TRXLab]

Thank you

[@hamelmer4827]

respect! what a good video!!

[@TRXLab]

Thanks

[@robwebster7406]

Great job, keep up the great content 👍

[@markmontgomery9722]

awesome great skill Peter thanks for this video 73s

[@TRXLab]

Thank you

[@ok2aqa731]

Very nice work! I have also had this radio for about ten years and sometimes it can't be turned off with the button. The data on the display disappears, the radio turns off the sound, but the display stays on. I have to unplug it to turn it off. After that, it works normally again for a few weeks, as if the power relay remain on. OK2AQA Marcel

[@DucatiMTS1200]

Good job Peter - excellent video. 73 de GI8WFA.

[@TRXLab]

Thank you...

[@Wyowanderer]

Bravo! Well done.

[@TRXLab]

Thank you

[@2metercrew389]

Great work👍👍👍

[@TRXLab]

Thanks

[@ukrainehamradio]

It is very interesting to see that radios with various malfunctions come to you, often old, but everything is in perfect condition externally. In Ukraine, I often see very dirty radios with external damage ...

[@TRXLab]

Hm that is interesting, do you have an idea why all the radios you have to work on are cosmetic damaged and dirty?

[@ukrainehamradio]

@@TRXLab Probably the same reason why we have here a lot of garbage everywhere, and people drive old stinking cars. Well-being starts with respect for yourself. The communist past taught ex-soviet people something completely different ... Even within the same country in Ukraine, the closer to the western border, the more well-groomed the houses and land ...

[@rickyn420]

hello Peter how can I get information where to send my Icom 751a

[@Davidjb37721]

Thanks for your time today

[@TRXLab]

Thanks for watching

[@arenaengineering8070]

Good video. Thanks 👍🏻.

[@TRXLab]

Thanks

[@13kimen]

Hello do you align the FT 857D from France?

[@borayurt66]

This is one very compact radio that I am very interested in to use in my car and field camps. I love that it has all the modulations on so many bands. I would like to work SSB on VHF & UHF, which would be a new experience for me, and also to be able to have a chat with CB operators on 27 MHz too. I have been reading reviews on it and one thing really bothers me, lots of owners have complained that the LCD develops faults (blank lines) after some time, especially when it is used in a car (heat? cold? vibration? all?) What is your experience regarding this matter? Has any 857's came to you with LCD problems? Best regards from Istanbul, TA2KQ

[@TRXLab]

Very very seldom seen on the 857 much more often seen on the 897..Hope that helps

[@Pedro8k]

Have you ever worked on the icom 2820 they have poor tx audio and sometimes no tx audio it seem a common problem with to his radio

[@jordil.catalafenollar8867]

Great job Peter. I really like your videos and explanations. I have an 897 with a similar problem. My problem is getting the microprocessor. Would you be so kind as to tell me the website where I can get this part? Greetings from Spain

[@вечная_мерзлота]

u need to be able to contact yaesu and buy it from them. as far as I know u can't just buy a chip. it needs programming downloaded onto it to perform correct operation.

[@TRXLab]

Yes the answer from Vital is right... Contact Yaesu Europe

[@scottb5662]

Excellent work

[@TRXLab]

Thank you

[@alvinrussell9747]

you need to show how to put the chip back in and how you solder it in !!!!!!!!!!!!! for my 857 was in a thunderstorm all so and my 740 Icom hf radio and 2 metal detectors,the radios was in a box not connected to a thing inside a closet in my home they do not work no more at all.

[@TRXLab]

In video #130 you can get in idea how it will be done...

[@cl5ltd]

Hi Peter, I have a FT-857 which is behaving very much the same as the radio in this clip, powers on, display comes up, audio can be heard, will go into TX- then switch off after 3 seconds with display still illuminated. I did the same voltage checks as you with similar results. You replaced components in the switching section which didnt resolve problem and then did the CPU. Could you give me an idea of the MCU cost as that may alone may make repair attempt worth pursuing.

[@TRXLab]

it depends approx 70-80€

[@douro20]

At least it isn't a custom MCU like a lot of these radios have.

[@TRXLab]

Well it is a "normal" MCU chip but it is custom as the Yaesu firmware is programmed to the chip...

[@w.rustylane5650]

You sure do work on a lot of Yaesu 857's. Remind me to never buy an 857. On one radio you repaired, it was totally TTL logic and I counted over 51 transistors. At least you're not working behind a golden screwdriver. I would never be able to replace a main CPU. W Rusty Lane K9POW in eastern Tennessee

[@TRXLab]

yes always a lot to do on that type

[@jamess1787]

Now only if you could work on my crappy/noisy recieve FT-8000! ❤️❤️❤️

[@TRXLab]

lol yeah

[@dl7majstefan753]

Did this guy (=owner) really take the TRX into the car and left the outside(!) antenna connected? > Darwin award!

[@TRXLab]

Of course not but it all happened so extremely fast that he was not able to get the PL connector screwed off so quickly. The learning he took away is to use in the future a BNC connector for the antenna to be able to get the koax away in a fraction of a second...

[@dl7majstefan753]

@@TRXLab but it sounds so at 0:36 : ... when he was touching the radio which of course he took with him into the car but the antenna was still connected ...

[@davidgrey943]

Hi, I have a question regarding the FT857 is there a simple test I can do to find out if there are any noisy components in my FT857. The reason I ask is that the receiver seems noisier than usual. I have tried the disconnected aerial test but still, get noise I was under the impression that if you disconnected your antenna your receiver would be dead quiet. I noticed on this repair when you had disconnected the antenna there was still static. I live in New Zealand so sending it to you would be too expensive I do have an IFR1600 test set. What tests can I setup which would give a good indication as to what is happening.?

[@TRXLab]

Perform a sensitivity test and confirm that the radio is in spec that will give you a first indication...

[@calarfe]

You rock !

[@gabrielsansar6187]

do you know about a 5 minute delay before you can use the buttons - a seller claims this is factory set this way