Trying a NEW 3 Point Attachment I have AVOIDED For 20 YEARS

‪@landtopmall‬
In this video, I try out a new 3 point hitch attachment for my tractor. This specific attachment style has been around forever but for some reason I have always avoided using one. No real reason, just assumed they were superfluous. Boy was I wrong! Once I got the adjustments made, this quick attachment implement will be a great benefit to help me swap out attachments in the future.
Landtop Attachments - www.landtopmall.com
Landtop Quick Attachment:
www.landtopmall.com/collectio...
$10 Off Coupon Use Code: Troy10. Code expires June 30th, 2024.
Be sure to subscribe to our channel and support our efforts by giving us a thumbs up.
Items we like and use on the farm:
Giltek EDC knives - gil-tek.com/?wpam_id=2
Portable Fuel Container Link: amzn.to/3pLDNGT
Sansi Outdoor Flood Lights: amzn.to/3iWKByy
Sansi Shop Light (Disco): amzn.to/3ad2OE1
Sansi Workshop Interior Lights: amzn.to/3cnAUrS
Sansi Motion Flood Light: amzn.to/39uAXA1
Energizers:
Patriot PMX200 - amzn.to/3mgWsZn
Animal Welfare:
Slap Shot amzn.to/3mizvF7
Allflex Dosing Syringe:amzn.to/3mjx1WJ
Follow us on facebook at / redtoolhousefarm
On Instagram at
/ redtoolhouse
Visit our website and be sure to sign up for our email newsletter so you will be up to speed on what goes on at our homestead. redtoolhouse.com/newsletter-si...
If you would like to help Red Tool House Homestead maintain the expenses of running this channel, consider using our Amazon Affiliates link when you shop on Amazon.
Amazon Link: goo.gl/4fiaxX

[@JohnWinsemius]

you need 2 class 2 bushings for the lower arms which are class 1. This will take some of the slop out of the back blade.

[@Dan-oz4qb]

I've had my quick hitch for over 20 years and am very happy with it. You might have to do a little grinding or welding, especially on older equipment, but it's worth it in the long run. Replace your top hook bolts with 1/2 inch trailer hitch pins for quick height adjustment without tools. The 1/2 inch are the ones used on the small receivers often found on compact cars.

[@patriotridgefarm]

My wife wants to thank Troy for her husband's new toy. She doesn't know yet.😂

[@mntalyAceptable]

Those lower arm locks are spring loaded. Release handles only need to be raised to remove the attachment. 👍 I bought my quick hitch when I bought the tractor. I had to adjust the top hook but no issues after that.

[@Dan-oz4qb]

A quick hitch in combination with a hydraulic top link makes hooking everything up much easier. Also either get a modified top hook or cut yours to a more open angle to reach in and grab the top link pin on the attachment.

[@kimberli2391]

Thanks Troy, my husband is ordering a green one to match our John Deere ☺️ Color is important. We have been putting off trying this for more than 20 years also. Something like this would have helped our marriage too! Oh so much easier!

[@jasonbroom7147]

A little grease goes a long way. Every new solution comes with its own set of challenges. These attachments are great, if you change implements frequently enough, and you adjust each implement to fit the solution. As I get older, I'm more and more inclined to make those adjustments. :)

[@MrBsizelove]

I had a similar obstacle connecting my scraper blade. I ended up just catching the lower pins first, then getting those top holes above the yoke bolt to where I could insert a hitch pin through them once that top hook was in between them. This involved slightly driving forward with the blade still resting on the ground until the top link holes put themselves to where a pin could be placed through them snd that top hook. It does require an extra trip on and off the tractor.

[@wynncoturkeycallsadrianwyn9601]

You have to add bushings for you attachment pins......all attachments

[@mburke1211]

I changed out my QH top hook to one made by Ken's Bolt-on hooks. It's not as thick, and I think the hook opening is larger. I know it's an extra expense, but you probably need to add bushings to your bottom pins, and that will eliminate play. My QH works with all my attachments, and is a must for my old back. By the way, you can leave your latches down when you're hooking up, and they will automatically engage when you lift your three-point hitch.

[@ryanguard1085]

Look into Pats’s quick attach. It slides over the lower link arms and the top link stays the same. Works great with older implementations.

[@joeford7350]

Troy I use Pat,s quick hitch attachment. Then the only thing you have to do is adjust the top arm. I would have nothing else.

[@joecahill8165]

I modified all my attachments to fit. Just back up and hook up. Takes seconds! Oh man, game changer. Good luck!

[@wadewalker6480]

Hey Troy I really enjoy your videos! I am by no means an expert is quick attach! In the past few years I have changed out center link hook bolts with pins and clips not all of my attachments have same distance.I also traded out some of lift arm pins on attachment to quick link pins they have a shoulder to prevent slipping off the side . Finally I found out the hard way that all pto driven implements may not have enough overlap on pto shaft to use quick hitch. Good luck !

[@lpcfarm4611]

Getting them to work with everything is a chore. Having the telescoping lower links and using the other adjustments seems to work out better than a quick hitch for me. As you noted, having flat ground makes the QH much easier to deal with, but I live in WV up the road a ways from you and have no flat ground.

[@bradjenkins932]

Not.

[@bradjenkins932]

I 'v had quick hitches on all my tractors for around 30 years now.. they work great.

[@glen748]

Yeah older equipment was not made to the same specs of newer equipment had to modify a couple of my older pieces but once done everything is gravy after that. Would suggest you look into getting some Quick Hitch Adapter Bushing Kit for 3-Point Hitch Tractors.

[@landtopmall]

Thanks buddy! Amazing sharing for the 3 point hitch. Your satifaction made our day! ❤❤❤

[@mariesheppard3750]

Great job figuring it all out, Will be so handy

[@PeaceIntheValley]

None of the QH are perfect but I found Pats to do very well for most things. Some things like a post hole digger just can't work on the standard quick hitch, but Pat's works fine.The other game changer is a hydraulic toplink. - if you have rear remotes - it makes a world of difference on getting the full potential of things like tillers and box blades.

[@timbervisions]

Here's my take on using a quick hitch. It seems to take the same amount of time to hook up to an implement each time (a person gets little better at it over time), but the real time saving is unhooking. Flip up the levers and drop it and you're done. I have had to do a few small modifications to make them work on certain implements, but once that's done, I was golden. Just my two cents!

[@kdegraa]

So no more kicking, levering or swearing to get an implement off?

[@timbervisions]

@@kdegraa correct!

[@patburgard2115]

Love it when a plan comes together

[@LittleCabin]

I love my quick hitch, but all of my attachments were made to be quick hitch compatible. I did have to put the cat 3 (2?) bushings on the outside pins on my box blade to keep them from jumping out when grading my rocky driveway.

[@phatzgunderson]

One of the reasons I didn't go quick hitch was having to also buy pin adapters for the lower pins on the implement. about 30 bucks a set, but you just disregarded them. You can see how small the pins are in the lower latches that's a lot of slop.

[@dallasarnold8615]

Since you have the loader bucket this is great. However, I can see where it might be a problem adding more weight further out on the back without the weight of the loader to help balance that out. I can see a lot of wheelies in the future, maybe. I might be assuming there is more weight there than there is, but I am mainly thinking of the implements being those several inches further out from the back.

[@shanebiggers8437]

I love my quick hitch I just wish the top hook stuck out farther from the mount sometimes the implements catch on the two bolts. Also they have sleeves for the pins to take out the slop. Mine is cat 0 and I have to use two sleeves on my pins. I’ve modified couple old implements to fit so far still got some to go or eventually replace and I also welded a plate to the top and put a gooseneck ball on it that works perfect!

[@Dan-vv1tl]

I like these more mechanical videos great to see you sorted the issue out .God bless

[@mattruby3966]

I helped my father with the quick attach mod for the front bucket, was fun welding the attachment to the bucket after cutting the bucket flush on the back.

[@nealsparks4187]

Yes, i went through the same process. All attachments are not built the same. The hook is worthless for me. I finally solved the problem by making a couple of plates to attach the top pins

[@tylergilbertson4086]

When I seen the double quick grips go together it has me rolling with laughter!

[@MrSnivvel]

A Quick Attach was one of the first things I bought for my tractor. I couldn't imagine going as long as you have and not using one, but then I've only been in the tractor game for a couple of years. Nowadays there's the formal QuickAttach specification for both sides of the equation to be interoperable so things should be easier with newer gear, but older gear may take more finesse and persuasion to work, as you found out. Good Works Tractor also sells their own designed weight hangers that go on the QA to hold three 41 lb weights on each side for extra ballast that I use on my Cat-I setup; though your setup may be a Cat-II.

[@thejackhomestead8638]

We have one love it. But never had the issues that you having , yes did have to adjust here and there but all in all it’s awesome.

[@CliffsideStables]

As you have discovered, not all attachments are quick hitch compatible. Now on to acquiring a GRAPPLE!!! Tim in northern TN

[@JR-rx2ke]

And it looked SO easy on the seller's video.

[@kevinblevins2612]

That is what I need to do I bought a quick hitch and it works good on everything except my box blade Can’t believe I didn’t think of the caridge bolts and raise the through pin!!!!

[@jimputnam2044]

A little work today will save you time tomorrow and beyond. Love the quick hitch, a pain and time wasted on the old 3 point hitch. It was a great invention 100 yrs ago. Time for an upgrade.

[@51rwyatt]

Seems like a hydraulic top link would pair well with the quick hitch.

[@bradjenkins932]

They do.

[@jaasx]

I labeled each implement with the pin hole location and top link length so i know just how to set it up so it connects easy. Still have to fight them occasionally but at least it's a good starting point.

[@keithbrigman5179]

Boy that makes things so much easier 😂

[@jeffpeters1014]

Always an adventure

[@pippaseaspirit4415]

It looks as though you could do with a grapple attachment for moving things like those logs!

[@gregtheredneck1715]

I was wondering how long it would be before the grinder made an appearance.

[@harrymudd693]

“It’s only temporary” There is nothing more permanent than a temporary situation

[@rockandrattleretreat5830]

Hope you checked your pto shaft length. You extend the distance with the quick attachment 😮

[@ralphmills7322]

Troy better measure the brush hog attachment to make sure you don't need another longer large bolt for that. Hate to have you drive into town twice!

[@barney1941]

pats easy change

[@toddcaskey9984]

I had to Modified every single thing basically even if quick hitch compatible

[@billb3487]

Troy did you have any issues with the pto shaft on the chipper. Was it still long enough since it is sat back a little further.

[@stuckinthemudgarden7726]

I have pats quick hitch it’s much easier than that thing . I tried the style you have and it might be quick if you spend a week getting everything set up

[@bradjenkins932]

I don't have any problems with my Q.H.

[@knickfarms7037]

Look for a bracket that still uses a pin on top.

[@LynnMorgan-fh2re]

I would change my lower pins to category 2 pins or install category 1 to category 2 bushings before the lower hooks batter out due to the extra clearance.

[@tritchie6272]

Is it legal for ANYTHING to work without jury rigging it up?

[@crossbowmd61]

Attempt # 1 Attempt # 2 Attempt # 3 Attempt # 4 So much for "Quick Connect"

[@RedToolHouse]

As mentioned in the video, initial adjustments on old implements were needed. Super quick now!

[@bud1412]

You really need bushings o your lower pins.

[@whineysnowflake8072]

bought one...had to sell it. It wouldnt fit older 3 point hitch attachments no matter what i did

[@chrissheathewoodguy]

I've never ben a fan of them. as our bush hog and plow and disks have different widths on the lower pins. if i had to mess with it as much as you did i would have packed it up and sent it back.. they may be go on newer or say certain brands better.. I've never found it that hard to hook stuff up.

[@BeaverTucky]

Some attachments are not quick hitch compatible, it helps to have all attachments from the same manufacturer with the same hookup dimensions because quick hitch is not universal, Pete's is not a 3 pt quick hitch...

[@BeaverTucky]

There is also a fatter link pin that needs to go on the attachment so it is held tighter by the quick hitch ears