Trying out an ENGRAVING PEN

Рет қаралды 35,617

Жыл бұрын

Link to Product: www.amazon.com/gp/product/B0B...
Thanks for watching!
Subscribe for more cheap, simple, budget-friendly DIYs!
Twitter: BrieIY
Instagram: missbriannaquinn
TikTok: brieiy
Music: KZbin's Audio Library
Keywords: DIY, Craft, Do It Yourself, Cheap, Budget, Cute, Simple, College, Art, Paint, Custom, Gift, Present, Tik Tok, TikTok, How To, Makeover, Make over, engraving, metal, glass, plastic, acrylic, polisher, pen, review

Пікірлер: 56

@user-gx3bk3rs3f Ай бұрын

Mine just arrived. Thank you for your fearless review!!!!😊

@TheFrankyMoon Жыл бұрын

Trace the stencils with pencil then engrave the pencil markings.

@heuerde6582 Ай бұрын

maybe the stencils are used to draw lines with a pen and then engrave them lines using the device

@nicky9589 Жыл бұрын

The Allen key is underneath, near the charging port., , and it's not thick wood, you're using soft pine. I got one today. Think it's pretty average for the price, 80 Aussie dollars, , but, it does what I needed, shape and polish after my laser engraver... Cheers from flooded Australia...✌

@wednesdayschildfullofwoe Жыл бұрын

Thank you!

@dawngarate4789 Жыл бұрын

I don't think mind came with one...there's like nothing there just a hole 😭

@cloudthief8918 10 ай бұрын

Mine doesn't have that

@soul_adventurist 2 ай бұрын

I recently purchased one of these and ran into the same issue: how do you switch bits? Instructions say there should be a wrench but there was not one in the package. I’m glad you were able to show how to change them! I was considering returning the item since I have never used one and couldn’t figure it out. Thanks for putting this together!❤

@troods8110 3 ай бұрын

I just got mine the other day! Im so excited to use it! Thank you so much for taking the time to do this, your video came up as I was searching how to use it. I'm super grateful for the tips, I have no idea what Im doing, yet! 😂 I'm an artist, a painter mostly so this is all new to me. Thanks again! And I love the fact that you are not 100 % on it. We all have to begin somewhere, right? Kind regards. ❤ You just gained a new subscriber! I just tried mine, omg I am loving this!!

@SabotPottery Жыл бұрын

Thanks for doing this, I was wondering whether if it was worth getting or not. Maybe use a sharpie on the stencils could give you better results, but it's just a thought. Thanks again for your time, regards, Paul

@alanisbaumdrache4060 Жыл бұрын

Danke schön für das testen🙂🌈

@brittneegandara6883 Жыл бұрын

Thank you! Just ordered this exact pen and feel much better since I didn’t really do any research first 😂 you are adorable

@lolitathomas4827 3 ай бұрын

I just received mine from Amazon. Thanks for doing a demonstration on how it works. The tips are very helpful. Everything was in my kit. I got 16 strips of stencils, but none has a shamrock. Still, I look forward to using the kit.

@thegraffitiwriterknowsas6821 4 ай бұрын

5:00 that's what she said

@bkkorner Жыл бұрын

Cool video. Which bit is for engraving metal?

@jelissabundy5932 Жыл бұрын

Just wondering how do I remove the Grinding head in order to remove the pen tip and place a new one?

@dawnanderson1443 Жыл бұрын

You also had the boarders to trace off of the stencils. You need to trace everything before you do the work with the pen. You won't ruin your stencils then. I like some of the tips on this one verses the one that I have. This one I like, but mine has different speeds which I also like.

@Mz.Stephanie Жыл бұрын

My kit is almost identical except I didn't get the drill bits and saw pieces.

@TheAnimalsMagicShop 10 ай бұрын

Thank you for doing a review. The reference to an Allen wrench is confusing - according to the Amazon page and user feedback, the bits are simply pushed into the chuck, and the saws need to be tightened in with a (tiny) screwdriver. The chuck which you normally would tighten a bit with moves but doesn't seem to go anywhere. Mine came charged and also with extra bits like yours that don't fit into the case which is kind of strange. The stencils would need to be traced first with a pencil, not used directly with the tool. Haven't tried it yet, but will definitely wear safety glasses!

@FisherCatProductions 7 ай бұрын

She is using an older version. The newer V3 has a battery charge icon and a 1,2 or 3 showing speed selected on the LCD screen. And there are different bundles including different accessories.

@emilykepler3761 Ай бұрын

The Allen wrench is in the bottom end of the pen

@KanuckStreams 4 ай бұрын

Same model as the one I got, which also didn't have an allen wrench. I even went out and bought one, and as far as I can tell the Allen wrench doesn't do anything. At all. The manual was likely copied from another cordless engraver that actually does use a chuck and allen wrench, and they didn't bother to proofread it. The pen pictured on the top of the box is actually not the pen in the box. You can see the bigger chuck on it where you attach the bits. That would be where the allen wrench would tighten the chuck.

@BarbieArtandAsmrFreak 11 ай бұрын

Thank you so much for video

@paskuini Жыл бұрын

Hi you can use spray paint to use the stencils in a way that will not spoil them (sorry for my bad english)

@poppletop8331 9 ай бұрын

Use a sharpie pen.😁

@pennyoflaherty1345 4 ай бұрын

I just got the same one from Temu thanks for this

@karenl7728 8 ай бұрын

I just got mine today. Love the video. Did you find the Allen wrench on the bottom of the device?

@sofierdblog 7 ай бұрын

My Allan wrench was either missing, or not available.

@yojole 4 ай бұрын

Hi. How can I remove and change the tip? Mine seems to be stuck.

@xiaomiphone9349 9 ай бұрын

Motor is brushed or brushless?

@kelliejean8839 4 ай бұрын

Hope you found your Wrench. It's at thr bottom where you put your charging plug.

@sofierdblog 7 ай бұрын

Thanks, very helpful. Mine has a missing allan wrench, as in not in bottom of pen. Also the description does not indicate where the allan wrench is hidden. Searched everywhere. So again, thanks for this review.

@KanuckStreams 4 ай бұрын

@Mz.Stephanie Жыл бұрын

My alen wrench in the bottom where you charge it.

@gaiasophia258 Жыл бұрын

I just ordered this as well. My suggestion would be to read all the instructions before doing the video. The Allen wrench needed was at the bottom of the pan and you insert it into the side. Where are you? Insert the tips so you can tighten it. So glad you were injured. I know there weren’t many that were included so I went back to Amazon and their picture showed more detail and answers a lot of questions.

@BrieIY Жыл бұрын

Awesome! I didn't think to check the Amazon listing images, I'll go back and take a look!

@mxzyk6150 Жыл бұрын

I did not see it doing it, do it again, please.

@claudiaargueta4694 5 ай бұрын

i love my

@texasmarshalls Жыл бұрын

Hi Brie - do you have a link for this?

@BrieIY Жыл бұрын

www.amazon.com/gp/product/B0B2BSQZ38/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 ! I'll pop it in the description too!

@ellenmorrison175 7 ай бұрын

Thank you as I purchased this same one but didn't know how it worked.

@larrymcintyre4407 Жыл бұрын

Read the book.

@barbaravandecreek4006 Жыл бұрын

I can’t get it to engrave on at all on a wine bottle. I may return it.

@justanotheerampart 8 ай бұрын

girl read the instructions thats why they literally place them on top 🤷🏾‍♂️stop guessing please 🤦🏾‍♂️ the first "head" as you call them are for glass ,rocks, and you basically clogged it up using it on wood . come-on. the disks have an orientation depending on what way its spinning im not hating but people come to this videos to "learn" by the title of the video and you are as or more confused.😅

@nur-alamakash3067 Жыл бұрын

আমি এটা চাই, কোথায় পাবো

@kill_repeat8491 5 ай бұрын

I got this for my daughter. Youre getting blasted in the comments for NO REASON. The people who are saying that you should read the instructions and that the allen wrench is on the bottom clearly don't have the same product.

@amieechay992 Жыл бұрын

...read the instructions...

@sandichamberlain7706 Жыл бұрын

How can you possible review a product if you have no idea what you are doing. You might want to read the directions first and give a practice try first.

@BrieIY Жыл бұрын

Thanks for the feedback. The way I see it is beginners buy products all the time. As a beginner myself, I believe it's valuable to share my experiences and things I've learned with other buyers. I never claimed to be an expert, and if I don't find the directions particularly helpful or clear (which I did not here), other buyers deserve to know that as well. For the most part, through my channel, I have built a generally positive community of people sharing their knowledge so we can all be better. Many people have politely given pointers or information in the comment section, and I have learned from them as well. That is the purpose of this content. If that is not the content for you, you are welcome to take your views elsewhere. All the best.

@HouseOfWoe Жыл бұрын

@BrieIY as blunt as she's being...she isn't entirely wrong. Experienced or not...everyone (especially beginners) should take the time to read instructions when trying a new tool that they're not entirely familiar with...otherwise this is how accidents happen. Seems as though you have issues with constructive criticism. This is KZbin, so you might as well get used to it, not everyone is going to pat you on the back & say "Nice job" everytime you create content, lol.

@BrieIY Жыл бұрын

@HouseOfWoe Again, thank you for the feedback. In case my original response was unclear, I did, in fact, read the directions. They were simply unclear or lacking, which led to the majority of my confusion. I mentioned very specifically not being able to find the allen key nut as listed in the directions. There were no directions regarding the tips or how to use them/assemble them, only directions for the pen itself. Admittedly, I did press the power button before checking the directions, but you can clearly see me opening and reading them immediately after around 1:52. I did cut most of the footage of me reading them out of the video because I did not find that to be interesting content. I do not expect a "nice job" every time I put out content, but I do believe I may explain myself or clarify missing content if I am met with concerned/confused comments in these situations. If thats considered taking criticism poorly, then I suppose you're right about that. In the future I will certainly be more clear about how I use directions to avoid being unclear. Thanks, and all the best.

@berrnisimon9785 8 ай бұрын

You don’t always get Amazon packages in complete order, some things may be missing and maybe (key wrench) was not packed.

@kmorrocco Жыл бұрын

Maybe read the directions first? Then you can speak intelligently about the product. Would make for a more factual test of the product. You’re sort of just guessing.