DTF & ALL Over 3D Sublimation [My Work Day]

[@nahnisjourney1406]

I think you did an excellent job!!!!! ABSOLUTELY EXCELLENT!!!!! NO SEAM!!!!! 👏🏽👏🏽👏🏽

[@jacquescraftyexpressions5990]

Hi Sin, I love the tee with the 3 pics on it. Great work as always. Thanks

[@lizziec7794]

Those shirts came out nice Sin! It's so cool to see your designs come to life. And no, I can't see the seam. Great job, as usual!😄😄😄

[@TshirtChick]

Thanks Lizzie!!

[@kathleenthompson3676]

I need one more item to complete my silk screen printing equipment. Do you use the 250 watt photoflood bulb?

[@TshirtChick]

When I first started I used a work light then I used a YuDu until I could buy a real exposure unit. I have a video listing everything and showing things I used to use

[@sasseymcbride3108]

Hi Sin, ty for teaching us. I want to move to DTF. How do I do sublimation on colored cotton t shirts? Ty

[@TshirtChick]

Hi Sassey! You can't sublimate directly onto cotton or dark shirts but you can fake it by using some hacks or products you can sublimate on then press onto the shirt. You can sublimate on white glitter HTV and flock and press onto your shirt. You can use a regular printer to print onto siser DTV and press onto a shirt. To do these options you will need to know how to contour cut unless you like block designs. Hope this helps! Thanks for watching!

[@purogreyhoundsbaby]

I didn't see the back of the all over shirts. You did do em' right? Great video though.

[@TshirtChick]

There was nothing on the backs. I have several all over print videos posted and have showed the back in some but didn't feel the need to show a blank back of the shirt

[@purogreyhoundsbaby]

@@TshirtChick Thank you I figured that but wasn't sure. I watch your videos all the time, just got an Epson 15000 printer to sublimate. Keep up the great videos, blessings!🙏

[@lisaweaver3124]

Hi I love watching your videos they are so easy to follow. I have a question can you do a all over design with DTF?

[@TshirtChick]

Hi Lisa! Yes, you can do an all over with DTF but it's a bit different than sublimation. With sublimation you will not have any hand/feel to the shirt because the ink tuns to gas and id absorbed into the shirt. With DTF you are printing on top of the shirt fibers and will have a hand (the feel of the hand will depend on how you press it).

[@MSIBM]

Loved your video, what is the biggest size shirt your all over press will take?

[@TshirtChick]

Thanks LarRie! I think it will do full coverage on 4X if I remember right for larger I have to do an extra press for the sleeve. I have a video all about my heat press that I show and tell all info about size and everything just in case I'm not remembering correctly

[@MSIBM]

@@TshirtChick Thank you, I’ll try and find it

[@TheLogoZone]

I want to make prints like that1 Awesome job! You do great work. KEEP VIBIN.

[@TshirtChick]

Thanks for watching!!

[@evefavorse5939]

Love watching your process

[@TshirtChick]

Hi Eve!! I appreciate you watching!!

[@nahnisjourney1406]

Yes, I love when you do the all over t-shirts. I still don’t have the courage to try it. 😢

[@brialo6016]

I am new to your channel for I have been watching lately, you are so professional along with some of the others that do tshirts and other things with sublimation etc keep them videos coming Love watching

[@TshirtChick]

Thanks for watching!!

[@ShaSha-wh8my]

Shirts look great. Do a tutorial with stay to finish on creating the shirt design and showing how to print the split pages please. What program are you creating the shirt designs with?

[@TshirtChick]

I have a video like that posted that shows my full process live without any edits. kzbin.info/www/bejne/g4uuc6umYrt7ac0

[@rodriguezpierre6968]

@@TshirtChickhello I really enjoy watching your videos and I would definitely like to see your full process of the all over shirt, I just watch your videos for educational purposes but I don’t have the funds at the moment to pay for a subscription at the moment

[@grandmess1]

where did you get the very large press from and what size is it

[@TshirtChick]

Here is the link for a video about all the equipment I used in this video kzbin.info/www/bejne/gqOVXoWmrb-an8Usi=CUsZbrKs_w31rKEj

[@feliciacaudillo7259]

The Epson artisan 1430? What materials did you use? I have the Epson artisan 1430 and I almost always get 2 blinking yellow lights so I just unplugged it and put it on a shelf 🤦🏻‍♀️🤷🏻‍♀️

[@TshirtChick]

Your waste tank could be full. You will need a Wic reset program.

[@Give2God]

Hi if you don't mind me asking what kind & size press do you have

[@TshirtChick]

Mogk 34x44

[@mynekacustoms]

Where do u get the large size butcher paper

[@TshirtChick]

Here are the links Brown Paper: amzn.to/42crTs8 White Paper: amzn.to/42hvULM

[@smokeysgriddle7993]

What video shows how to do the seemless print with epsom 570

[@TshirtChick]

Here is the link for that video kzbin.infoMZKBxp-VH3k?si=MFjF_2QDitLbLHeX

[@randlestshirtco0310]

I love this!❤

[@boogeeass]

I see some ppl inserts in them to give it a lil stretch just in case some one put it’s on and it stretches it done look faded

[@TshirtChick]

I paid a lot of money for those inserts but get worse results when I tried using them. I did it on a live but I don't remember which video it was but That video is still posted on my channel.

[@boogeeass]

@@TshirtChick that's good to know I dont need it I was going to get the board at hobby lobby just to use so I will be able to keep my shirt str8 and it won't hang down I can just slide it over you think that will work.

[@tisharenee2755]

Hey Sin! Curious to know how much you would charge for these shirts.

[@TshirtChick]

I wouldn't go less than about $35 but I have seen people that sell for $50 and up so I guess $35 and up depending on what all they want printed on there.

[@tisharenee2755]

@@TshirtChick Thank you for replying!

[@TshirtChick]

@@tisharenee2755 YW

[@mon00707]

Do you sell custom DTF designs we can press on our own?

[@TshirtChick]

Hi Monica! Currently I do not because of issues with my DTF printers. I plan to start back once I get something more reliable going

[@mrwise7067]

What is your price for a sublimation T-shirt, and what state do you ship out of?

[@TshirtChick]

For allOver sublimation it starts at $35. I'm in Louisiana

[@mrwise7067]

@@TshirtChick can you send me your info?

[@joelcarter9440]

Where can I order a 3D Machine and I need some Software to go with it 🤔

[@TshirtChick]

Hi Joel! IDK what a 3D machine is. In this video I used a 24 inch sublimation printer and a large format heat press to create the 3D shirts in this video. I have a link that pops up during the video that tells all about my equipment used for the 3D sublimation. I have also seen videos of people doing the same thing using smaller printers and regular sized heat presses. Hope this helps. I also leave links below the videos.

[@LoafGangkirb]

Hey. Looking to get into dtf transfers. How can I get my logo on it?

[@TshirtChick]

You can contact Pink's Tees and Things on iG she can hook you up. I'm currently not offering the DTF Transfers.

[@erionbrown5646]

How do you get it seamless? I’m having trouble

[@TshirtChick]

I have a members only video that shows my full process with tips

[@brendacoleman4155]

What software do you use

[@TshirtChick]

@@brendacoleman4155 photoshop

[@evestersutton5966]

Awesome job

[@TshirtChick]

Thanks Evester!!

[@ritaroccuzzo4278]

Thank you for sharing Sin！！

[@TshirtChick]

Hi Rita!! Thank you for watching!

[@monaford8447]

Hey good morning sin that’s nice

[@TshirtChick]

GM!! Thank you Mona!!

[@amygipple827]

Very cool!

[@TshirtChick]

Hi Amy!!! Thank you for watching!

[@reneepaiz9574]

Awesome

[@cheporivera007]

❤️❤️🔥🔥🔥🔥🔥🔥🙌 I love this video 💯 you just put me on.. thank you for making these videos ... you are the g.o.a.t 🙌💯💪❤️

[@TshirtChick]

I appreciate that

[@cheporivera007]

@TshirtChick always. Just keep doing your thing 💯

[@evestersutton5966]

Yessssss

[@evestersutton5966]

lol I screaming lent roll lent roll❤❤❤

[@TshirtChick]

LOL!!

[@carlabrown9347]

Hey Syn..

[@DJFATSTAX]

Hey Ms looks like you moved to a new spot and How's your son

[@TshirtChick]

I been in this building since 2020. I have 2 sons, they are good.

[@DJFATSTAX]

@@TshirtChick Then its been a while since I been on glad you all doing well

[@TonyaD003]

Very nice work queen, new from Alabama 🇺🇸, let’s connect and grow!

[@TshirtChick]

Thanks Tonya!!

[@TonyaD003]

@@TshirtChick you’re welcome, let’s stay connect and keep in touch