EASY ALCOHOL INK MUGS..HOW TO MAKE AND SEAL ALCOHOL INK CUPS!!,

Fun and easy Alcohol ink mugs!! Full tutorial on how I make and seal them.
Let me know if you have any questions!
All supplies will be at the end of this description.
Tina
Make sure you seal your alcohol inks with a water based spray sealer such as Kamar UV spray..a few coats before adding the crystalac brite tone. Link is below.
Thanks,
Tina
Crystallac brite tone save 5% with my affiliate link thecrystalacst...
ALCOHOL INK SUPPLIES:
thecrystalacst...
GALAX PRO 12.5 Amps 1500W Heat Gun with 2 Temperature Modes and 4 Nozzles for Stripping Paint, Soldering Pipes, Shrinking PVC www.amazon.com...
NARA SYNTHETIC PAPER for Alcoholic Ink PAINTING-12mil(A2 Size) www.amazon.com...
NARA Paper for Alcohol Ink Painting (320 GSM, Heavy Paper, 11"x14") www.amazon.com...
Tim Holtz Alcohol Ink Mega Set - 24 Unique Ranger Alcohol Inks Made in USA - Bundled with Moshify Blending Pen - Perfect For Use With Yupo Paper, Epoxy Resin And Tumblers - Tim Holtz Artist Set www.amazon.com...
Tim Holtz - Ranger INK BLOWER, 0 www.amazon.com...
Revlon Ceramic Hot Air Brush Kit... www.amazon.com...
Master Airbrush Multi-Purpose Airbrushing System Kit with Portable Mini Air Compressor - Gravity Feed Dual-Action Airbrush, Hose, How-to-Airbrush Guide Booklet - Hobby, Craft, Cake Decorating, Tattoo www.amazon.com...
Mugs:
www.marylandchina.com
arteza.com/dp/...
of-60

[@laradas6043]

I like the the process of making the cup decoration. The colours are vibrant but not overwhelming. Thank you for sharing. Regards

[@TSRCreations]

Thanks. You are welcome

[@kelseysartofrecovery7257]

Can you post a link for your cup turners? I couldn’t find it. Please and Thank you

[@TSRCreations]

There are so many to choose from on Amazon and they are very affordable. Here is one like the one I bought Creative Cuptisserie Cup Turner Double Tumbler Steel Frame Cup Spinner Machine for Drying Epoxy Resin DIY Rotisserie Motor Rotator Kit to Personalize Tumbler Crafts at Home Update a.co/d/9liwPUH

[@kariedent6211]

When you spray the kamar, how and where do you do that? And how do you not get spray marks in the alcohol inks? That is something I have had trouble with . I hope that makes sense. Your videos are great! Thanks!

[@TSRCreations]

I spray outside and usually let the inks dry overnight. Also hold the can six inches away and spray lightly so you don’t get runs or drips. Hope that helps! Thanks so much!

[@carynmccarthy4204]

Love them! So pretty! Can you use poly acrylic in place of brite tone? Thanks!

[@TSRCreations]

Im not sure about polyacrylic. Brite tone is made for bar tops so therefore food safe after curing.

[@DyahNuringtyas]

I want to learn how to make mugs. What so far it's my first time watch your video how to make mugs. So will you teach me carefully and I am will very glad. I am already 51 years old and I want earn money for I like very much writing poems and painting too called scetch too. Sketsa. As this far I still dont have believe I have money. Maybe poor. But everyrhing I will try. God makes me find your video. Thank you. In 1985 until 1988 I lived in Netherlands coz my father will got doctor in Amsterdam. Now he is already dead. I live here in Salatiga middle Java. Will you too come to my house and visit here. Ok I am very glad to see you I hope you too. Thank you. Tinur or Dyah Nuringtyas bye bye

[@DyahNuringtyas]

Thank you coz you will teach me mugs

[@Vbjournal18]

Can we use resin instead of brite tone ?

[@TSRCreations]

Yes! Light coats

[@shawnabelle2824]

how long after the ink do you put on the Kamar spray

[@gratefulcreations]

I was just gonna do this today. But I don’t know how to seal them. So thanks for this video

[@maureenhouston1026]

Beautiful. I love this mug style. Is it the 9oz #4403 from Maryland China? Can you tape off the rim area to protect it during spraying? Thanks for sharing.

[@TSRCreations]

Thanks! I get some from Maryland china and some from Amazon. Sure you can tape it of

[@annashaffer6288]

Hi, Just happened on your video, Love these mugs, thank you so much for your great tutorial. Are the mugs microwave safe to use when finished?

[@TSRCreations]

Thanks. Yes they are. Just don’t wash them in the dishwasher

[@MarquittaDodson]

I want to learn how to make cups

[@rumisekd]

How long do you wait between Kumar and Brite Tone?

[@TSRCreations]

Sorry for late response. I usually wait a day

[@lisahummert8670]

Beside prepping the mug by cleaning it with alcohol, do you do any other prep to it before applying alcohol ink? You mention Krylon or Kamar but I saw you sealing with Brite Tone, what are you using the other two for? Thank you!

[@TSRCreations]

All i do to prep is wipe clean with alcohol. Sealing is a process. I spray the mugs first to seal in the inks because I find the brite tone can reactivate the inks and cause some smearing and running that ruins my design. I do this same process to my alcohol ink paintings before resin.

[@kaymertes2726]

What do you tell you customers about dishwaher and microwave use?

[@TSRCreations]

I always say hand wash and don’t recommend microwaving.

[@kaymertes2726]

@@TSRCreations thank you

[@bouzidielatra7083]

👍🙏💕

[@OurBackroomCreations]

Love your video. I am just starting out. Question: Could you not tape off the lip of the cup? Would this leave a ridge where the sealer ends? TIA! ❤

[@TSRCreations]

Yes you can, but it may leave a ridge yes

[@cherreel5021]

Are they dishwasher safe?😊

[@TSRCreations]

No I always tell my customers to hand wash them

[@judyhoover8160]

Are they dishwasher proof after the varnish?

[@TSRCreations]

I don’t recommend dishwashing these.

[@judyhoover8160]

@@TSRCreations Thank you

[@gratefulcreations]

So gorgeous. I was just planning on trying this with Saran Wrap technique. Good to know how to seal them!! Thanks Tina

[@TSRCreations]

Yes thats a fun technique

[@sf9046]

When do you apply the UV sealant? You do 3 layers of Kamar, then 4 layers of Brite Tone. Not sure when you apply the UV sealant.

[@TSRCreations]

Sorry for late response.. i use it after the Kamar varnish

[@heatherream5515]

I have a question, as I must saw your Instagram video showing all your items in a shop. I poured on a porcelain dish very similar to the ones you have in the video. I resined over it. I’m scared the resin may come off. I’ve never poured on porcelain before. I cleaned with alcohol first, poured, and only resined where the paint was. You are the only other artist Ive seen do this. How did you prep your surface and do you think it would hold up to hand washing?

[@TSRCreations]

Hi. So I don’t paint the porcelain before the resin. I clean the porcelain with alcohol and then pour my resin. The Resin adheres well to it and i have not had any issues. I always suggest only hand washing. Hope that helps!

[@Jaxie.99]

Hi, great video. Would the brass paint cause sparking in the microwave?

[@TSRCreations]

Good question. I will have to try it to be sure.

[@collettegay1432]

Would of been nice if you would of explained what you were doing while you were making the mug instead of the music

[@TSRCreations]

Thanks. I do have a couple other videos where I do talk through this process.

[@lynnisaacson1564]

I love watching your videos!

[@shadesmadness4399]

Is this varnish dishwasher safe?

[@TSRCreations]

I always tell my customers to hand wash. There is a dishwasher safe modge podge but I don't like the results.

[@shadesmadness4399]

@@TSRCreations that's what I hear too yeah. Thanks!

[@margjane42]

They look lovely and the colours great. I paint mugs with Lustre then I have to fire them to 800 Degrees in the kiln but I don't have to varnish them. Your way seems a lot easier with alcohol inks.

[@TSRCreations]

Well I am sure your are beautiful! These are fun and easy. I would love to take a pottery class and make my own mugs!

[@Kathy-Carr]

Wow, these are beautiful!! I have used the Brite on paintings, and was not fond of it….felt rubbery. How does it feel to the touch on the mugs? Sounds like a better option than resin. Not dishwasher safe, right! Thank you, Tina! ❣️

[@TSRCreations]

Thanks Kathy. It feels very nice almost resin like on the mugs. I used it on paintings too only one coat though. I would say hand-wash only. But even if it was i wouldn’t put anything hand made like these in the dishwasher.

[@Caroline-fp9sq]

What kind of tumbler machine do you recommend? Gorgeous mugs! 👍

[@TSRCreations]

There are so many out there. But if you are just getting started this is a good low cost choice. Cup Turner for Crafts Tumbler - Cuptisserie Tumbler Turner with 2-Way Spin & Silent Rotisserie Motor, Cup Spinner for DIY Glitter Epoxy Crafts Tumblers… a.co/d/1giXdzL

[@KitsunePhotography]

I’m not a huge fan of gloss, do you have a matte/satin recommendation for a sealant?

[@TSRCreations]

Yes the Kamar sprays all come in matte and satin finishes, so just do not use the brite tone.

[@elizabethschydlower5367]

Beyond beautiful! I love to watch you work-thank you for the wonderful tutorial.❤️

[@jaedo71]

May I ask what you price your mugs? Thanks!

[@TSRCreations]

I charge $35 a mug

[@isithotmama]

Very impressive and beautiful. Can you tell me how long the process was cuz I know you sped up the video

[@TSRCreations]

Thanks. One cup takes me about a hour or so and then the clear coating takes me a couple days, doing roughly two coats a day. The. Let them cure for 30 days before use or selling them.

[@Pottymoon]

What’s the thing you’re holding inside the mug, Tina?

[@TSRCreations]

Its a handle for a cup turner. I have one when I make tumblers

[@roxaneyorba8194]

Hi, loved your mugs! Do you do 3 to 4 lite coats of brite tone and then sand and do 3 more lite coats?

[@TSRCreations]

I dont really sand between unless they feel rough. I do 4 coats of brite tone

[@deidremillerdeesart9273]

So great thank you for the tutorial I make mugs too but now I have a better idea of how to stabilize the cup

[@TSRCreations]

Thanks Deidre! Great im glad i could help!!

[@mrsretired]

Love this. You’re very talented. Awesome technique. I just want to know where I can buy one.

[@TSRCreations]

Hi Carolyn. Do you mean you want me to make you one? I have two finished they just need to cure. You can email me at [e-mail]

[@christines2451]

So pretty. I would never know what to charge for these. Do you price per cup or a set?

[@TSRCreations]

Thanks! I price per cup. If they want a couple i usually give a little discount.

[@christinekondratick258]

Quick questions, approximately how many mugs can you seal with a pint or quart of bride tone? Also, how long is it good for once opened? I need to decide on the size I want to purchase to seal the new ceramic items for my shop. Thanks, love your video, it helped out so much because I wanted to add some new items to my shop.

[@TSRCreations]

I have about a half of quart left and I would say I have coated at least 2 dozen mugs and a painting as well. It goes a long way. Use several thin coats on ceramics.

[@christinekondratick258]

@@TSRCreations Thanks that helps out alot. I appreciate it. Your work is beautiful. I had this idea in my head before I found your channel. So it was nice to see someone actually do what I was thinking about before I did it. LOL.... I do alot of mixed media products and had been putting off playing with alcohol inks. Now that I have, I find them fun, relaxing, and want to add a few items to my shop for diversity.

[@janbatin4708]

These are beautiful, Tina. I really appreciate you showing your process. Hugs. 🎶💞🎶

[@TSRCreations]

Thanks Jan for always watching!!

[@DarcyAllen-y2n]

I love it! So beautiful! The gold really made the design.

[@TSRCreations]

Thanks!

[@SorayaZiziArtist]

Beautiful Tina!👏😍

[@TSRCreations]

Thanks Soraya they are fun and easy!

[@lynnprice2986]

Will it give your painting a resin like shine? The top coat

[@TSRCreations]

Yes it will. The other product that works very well and gives a nice shiny finish is Liquitex basics high gloss varnish.

[@thiadimaio8871]

Those are beautiful. I'm new at this and have watched other artists some use sandpaper on their mugs, why do they do that and do you use sandpaper?

[@TSRCreations]

Thanks. Some people like to sand between coats..I I don’t find it necessary unless the mug feels rough afterwards.

[@thiamata5346]

@@TSRCreations oh okay. Thank you.

[@isithotmama]

Is there a way to do this without the cup Turner?🤷🏾‍♀️

[@TSRCreations]

Yes. You would just do light coats of the sealer by hand. And let dry.

[@sharonbenkendorf408]

How long do you wait between using the Kamar and the Britelite

[@TSRCreations]

I wait a day then add the brite tone

[@teraperry1008]

That was awesome Tina! I have real mug envy right now!😊💛💚💛💚💛

[@TSRCreations]

Lol Tera! Thanks for always watching ans supporting my videos!

[@callesixtwo]

Once they setup for a few weeks can they go in the dishwasher?

[@TSRCreations]

I only suggest hand washing unfortunately!

[@andreak6444]

Have you had any issues with the Brite Tone peeling?

[@TSRCreations]

No i have not but i use 3 to 4 coats

[@lynnprice2986]

Will the brute tone make a painting look like resin finish?

[@TSRCreations]

Yes it does work on a painting and looks very glossy. You just need to be aware it may leave brush strokes unlike resin.

[@rosanneperrine7268]

Can you do a video showing how you prepare your cup

[@TSRCreations]

Do you mean prior to adding the inks? All I do is wipe it down with alcohol and let it dry.

[@barbaraospina7219]

Can you epoxy instead of varnish?

[@TSRCreations]

Yes you can. I would suggest using a cup turner to apply it.

[@emilywawasi8317]

Hi... new here... this is awsome.can i use only resin as sealant if i dont get kamar sealant?

[@TSRCreations]

You need to seal with varnish before resin because resin can reactivate the inks.

[@emilywawasi8317]

@@TSRCreations thank you.

[@kathysausen6493]

Tina these are just Beautiful!!!!!💕🧜‍♀️

[@TSRCreations]

Thanks

[@michellekiser5268]

Is that a blow dryer you are using?

[@TSRCreations]

I am using the Ranger hand pump to blow the inks around.

[@vinitanahar]

How many days should we keep to dry

[@TSRCreations]

I let the inks rest for a day then spray them. Wait another day to start the brite tone. Then After 30 days of curing you can use or sell.

[@andreak6444]

Look great!! Thank you for the video. Do you sand them at all?

[@TSRCreations]

You can sand between coats very lightly but i dont usually. Not sure there is a need. I know others do.

[@andreak6444]

@@TSRCreations thank you!

[@gina2455]

Can you use a heat gun to manipulate the colors? Why do you have to use a spray-on varnish as well as the BT?

[@TSRCreations]

Hi Gina. You can use a low heat blower sure but the inks will dry a lot faster and won’t move as well. Also the Brite tone will reactivate the inks so you have to seal them first. Thanks

[@gina2455]

@@TSRCreations ok, thank you. What about the 2nd part of the question?

[@TSRCreations]

Oh…If you meant do you need to do both?? No you don’t just make sure you use a UV varnish last!

[@gina2455]

@@TSRCreations Yes, that's what i meant...why you have to use both. :)

[@dianebuckley6028]

Lovely colours 😊

[@TSRCreations]

Thanks!

[@lesleylang3497]

Turned out lovely.. great job!!!

[@TSRCreations]

Thank you!

[@barbmelcarek2497]

What a beauty! Thanks for the great tutorial💕

[@TSRCreations]

Thanks

[@kaymartin9607]

So pretty 😍😍

[@TSRCreations]

Thanks Kay

[@RBrown-zl6wo]

Love it!

[@TSRCreations]

Thanks 🙏

[@michellekiser5268]

Beautiful!

[@TSRCreations]

Thanks