How to install LED Front Turn Signals on a 2021+ Honda CRF300L by TST Industries

Upgrade your CRF300L front turn signals to bright LED units from TST Industries. Choose between the sleek and low-profile BL6 design, the modern ARO18 design, the retro Echo design, or our Flushmount style signals. Combine with signal mount adapters and Honda wire harness converters for a simple plug-and-play installation that won't require any cutting, splicing, or soldering!
Get Front Turn Signals here: bit.ly/3rwjoZV
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Ditch the big and bulbous stock signals that come stock on your CRF300L and upgrade to a bright LED solution that not only adds brighter lights, but improved looks as well. These LED signals install using the included Mount Adapters, which provide a sturdy mounting surface and fill the hole left behind from removing the stock signals. Our wire harness converters ensure a plug and play installation, getting you back out on the road sooner and not left in the garage splicing wires. You can choose between our sleek and low-profile BL6 signal design, the modern ARO18 signal design, the retro Echo design, or our Flushmount style signals. All of which provide excellent light output and improved design over stock.

[@aaronsmith9106]

This was probably one of the best videos I've seen where they go over every single aspect of the job, along with the flasher relay and what it does. Excellent video. Will be ordering all of my led lights from you for my 300L

[@dr.x4050]

Great video! The Running Mate is a big help because I didn't find an easy way to get to get the running lights working with typical 2-wire lights until now. This installation looks about as simple as it can be.

[@markblankenship5788]

Nice clean install. I like the plug n play setup. Nothing worse than having to splice crap together.

[@TSTindustries]

Thank you. We try and keep it simple and clean for folks out there

[@twstdgt9318]

Sweet keep the 300l mods coming! I have 5 miles on my new 21 so far lol! Tad cold here in Northern Indiana. Appreciate the videos!

[@TSTindustries]

Thanks for the love!

[@EvanCollins04]

To save someone else the same trouble later on, I’d like to point out at the beginning of the video he says if you get the running mate you can ditch the original signal converter, he goes on to say that the 3-3 harness converter will be INCLUDED with the running mate. Maybe they just forgot to put it with my order but the 3-3 harness converter does NOT come with the running mate and you have to have it. So now my bike will be down for about another week while I wait on my harness converter.

[@TSTindustries]

Hi Evan - Sorry to hear about the error on our part. We will make the necessary changes to ensure our video and website match but in the meantime, we have refunded you the cost of the converters on your recent order and hope you can accept our apologies.

[@EvanCollins04]

@@TSTindustries I just saw your alls email. I appreciate you guys! Great customer service, and the fender eliminator and front turn signals I ordered are awesome! I’ve already recommended y’all to a few friends. Thanks!

[@ToBeNavySEALS]

On the TST website the flushmount turn signals (featured in this video for the CRF300L) are labeled as "front turn signals". Are they also compatible as rear turn signals?

[@TSTindustries]

Technically, you can mount the flushmounts on the rear.

[@mollygrubber]

No mention of using JIS screwdrivers for Japanese bikes? That would prevent a LOT of stripped "phillips" head screws (to be clear, they're NOT phillips head - they're JIS). Otherwise, a really thorough and well done video. Thanks for posting this.

[@TSTindustries]

The issue with that is this implies that the customer has to go get specific tools. Our videos aim at empowering the average customer to use the basic tools they already have.

[@RonaldHetherington]

how can I find the adapter cables and the mounting hardware

[@TSTindustries]

@@RonaldHetherington TSTindustries.com

[@jimjam6896]

Do you know where the turn signal Fuses located

[@dianavotaw8027]

how do i access the front signals on the 300L Rally?

[@josemontero66]

When are the TST In-Tail LED Integrated Tail Light For BMW S1000RR 2021 going back in stock? Need the anodized Blue!

[@TSTindustries]

Hopefully within the next couple of weeks!

[@robertbone17]

will it work on a crf205L?

[@RobertoRamirez-op5ph]

I don’t see the flush one one the website:(

[@TSTindustries]

They are there. It's the 11th product page icon from top left, right in between Echo anodized accent rings and rear signal blockoffs.

[@TSTindustries]

Here is a direct link tstindustries.com/tst-led-front-flushmount-turn-signals-honda.html

[@JACKSONTYAD]

What about BART?

[@TSTindustries]

What about me? Are you asking why Mark did the video and not me? It has gotten very busy for our little team and Mark has stepped in as the other main presenter. This way I can still have time to design these products, otherwise we won't have any more new parts to present on.

[@The9Jake]

This companies customer service is going to hell in a hand basket!

[@TSTindustries]

What seems to be the issue and how can we help?

[@The9Jake]

@@TSTindustries I have ordered many things from you guys for several different bikes and have always been highly satisfied with the quality and if needed the customer service. My last order I asked if I had everything ordered correctly for my install and all I got what was a short snippy comment and the information I received was not complete. I have my bike apart and no mounting bracket. I sent a email via your website and hope this can be resolved quickly.

[@TSTindustries]

@@The9Jake I tried searching our order database for anyone named Jake or Jacob that has ordered CRF300 parts and only found one who had questions regarding a tail light, not front signals. We'd love to help out as much as possible but without additional information, it is a bit challenging. Feel free to message us on Facebook, if that works for you, and we can do our due diligence to source and correct any possible issues you may have experienced.

[@TTVDOUGERS]

I installed the flush mount turn signals, with the signal made and Honda 3 to 3 connector and now my running lights stay on but my blinkers don't work at all now. They just turn off when I use the blinker. I took a video if you want me to send it to you. I love your products but please help​@@TSTindustries

[@TSTindustries]

@@TTVDOUGERS KZbin is not a good place to get help on these topics because it is not manned by troubleshooting staff. You will get better help through the customer service portal on our website. Our guys will have instant access to your order history and they will take you through troubleshooting steps that will get you sorted in the quickest way. -BR

[@user-bd1eb2op6l]

ship to israel?

[@TSTindustries]

I'm sorry but at this time we do not ship to Israel.

[@clarenceclark8592]

Liquid tape ? Lol

[@TSTindustries]

What?

[@400exxxx]

The plastic washer for the flush mount turn signal is to small. It just goes straight thru.

[@Broxty]

He said that.... maybe you should listen next time, dummy.

[@Enctypt]

I'm currently having the same issue on my 2022 crf300l. Ill have to get a larger washer.