I called them today. Great customer service and personal approach. The instal should be easy for both items. I had ordered another after market muffler and it was a nightmare. This is the way to go
@broguemotorcycles2 жыл бұрын
Thanks again for the support and order! It was also a pleasure speaking with you about your service! Ride safe out there and please reach out with any questions.
@ginnystokes20134 жыл бұрын
I just installed mine. It was way looser on the exhaust than your bike, but it tightened up fine. The booster plug was super simple to install It sounds great! 50 and sunny in Chicago today. I'm going for a ride!
@broguemotorcycles4 жыл бұрын
Happy to hear and safe riding! Yes, ours was tight because the clamp was tight during installation which helps keeps the gasket from sliding back. We need to note that:).
@abrouzo5 жыл бұрын
Great video! Very clear instructions. The sound reccording quality was very good and the bike sounds amazing with the new exhaust. Would love to hear the sound comparison (with the same microphone used in this video) of the stock exhaust vs. the new one! Really thinking of buying one of these exhausts and tuners.
@broguemotorcycles5 жыл бұрын
Thank you! We will work on some more audio with the stock exhaust.
@alex_rodriguez7775 жыл бұрын
great stuff think we could get more sound clips? (drive by and stuff)
@broguemotorcycles5 жыл бұрын
No problem, we will work on that!
@Christie04903 жыл бұрын
@@broguemotorcycles Hi - were the sound clips ever created? Interested in purchasing this but want to hear it first.
@chrisduran17573 жыл бұрын
@@Christie0490 Just buy it, trust me…I know they’re sold out right now, but the exhaust and the booster plug are both amazing, one of my favorite mods I’ve done to this bike. Expensive, but very worth it, great company overall
@Snoozie099 ай бұрын
Just installed mine, piece of cake! (And I'm not very mechanically gifted). Sounds great, feels like a whole new bike!!
@broguemotorcycles9 ай бұрын
Enjoy! Thanks for the order and support!
@JRich165 Жыл бұрын
So awesome. I’m picking up TWO TUxs this week for abt 3K a piece very low miles; I been looking for a while. Just finding your site. Thank you for the tutorial it’s very beneficial. Also, what tag plate holder is that, I’d love it on ONE of my TUx? Pls thank you
@broguemotorcycles Жыл бұрын
Thanks a bunch! That's an old part we used to make and have since discontinued.
@TWDay-sy6nq Жыл бұрын
Before-and-after dyno results would be nice.
@broguemotorcycles Жыл бұрын
It's a 250. If you are looking for better reideablity, then the muffler plus the booster plug is the way to go. IF YOU ARE LOOKING TO SQUEEZE 1HP, then a custom tune is in order.
@nefraw115 жыл бұрын
Very good instructions.
@broguemotorcycles5 жыл бұрын
Thank you!
@larespuertorico3 жыл бұрын
Sweet sound
@broguemotorcycles3 жыл бұрын
Thank you!
@nextse7en3 жыл бұрын
Would you mind sharing what that rear brake light setup is and where I can find it?
@broguemotorcycles2 жыл бұрын
It's our café kit and we use custom dynamic LED strip... we then weld cut and inlay them into the cut down loop.
@elhulio5222 жыл бұрын
guys, did you know when you will have stock again? Thanks and very good video!
@broguemotorcycles2 жыл бұрын
As of now they have been removed from our inventory.
@elhulio5222 жыл бұрын
@@broguemotorcycles oh what a shame, thx for the answer
@droneviews56273 жыл бұрын
Wish this came in a shiny Chrome to match rest of bike, can this booster plug be used with other mufflers?
@broguemotorcycles3 жыл бұрын
Yes, it absolutely can.
@whatismason2 жыл бұрын
Could I install the muffler without purchasing the plug to go with it? Worried about how the bike will perform, popping, etc. Thanks.
@broguemotorcycles2 жыл бұрын
You can, but you will have some popping. Not as much as others on the market. A Booster Plug will help with that. I hope this helps! Cheers.
@whatismason2 жыл бұрын
@@broguemotorcycles Awesome, thanks for the quick reply!
@SkyJamVideos5 жыл бұрын
Is the booster plug used only for muffler replacement or it can be used on its own?
@broguemotorcycles5 жыл бұрын
It sure can and we've installed plenty of them on customer bikes. They all love it!
@JDMdrifterboy74 жыл бұрын
@@broguemotorcycles so a booster plug and I'm good? I wanna fab up a yoshimura
@broguemotorcycles4 жыл бұрын
@@JDMdrifterboy7 Yup!
@zhukie5 жыл бұрын
Re the booster plug, don't you have to connect a 3rd wire to the ECU? That's what the instructions on boosterplug's website show.
@broguemotorcycles5 жыл бұрын
If you follow the video you are... By putting it "inline" with the computer (air temp sensor).
@zhukie5 жыл бұрын
@@broguemotorcycles No worries...thanks for the reply! Have just ordered a kit. Gorgeous paint job on that bike too :)
@broguemotorcycles5 жыл бұрын
@@zhukie Awesome and thank you! Hope you like everything. Please feel free to reach out if you have any questions.
@zhukie5 жыл бұрын
@@broguemotorcycles Will do. many thanks again for the help :)
@zhukie4 жыл бұрын
@@broguemotorcycles I have now installed the BoosterPlug and it is everything you have described - and more! Has transformed the way the bike rides, its almost like a completely different machine. Could not be happier with it :) Could I also ask re your other mods pictured...is the flat seat available seperate from the BP/muffler kit?
@bimmabean73595 жыл бұрын
that beautiful lady is really in a good shape, clean shiny and sounds soft.
@broguemotorcycles5 жыл бұрын
Thank you! She will be for sale very soon.
@troyminer74 жыл бұрын
Is the booster plug required?
@broguemotorcycles4 жыл бұрын
We recommend it.
@ginnystokes20134 жыл бұрын
When will the mufflers be back in stock?
@broguemotorcycles4 жыл бұрын
Back in stock:) For now.
@ginnystokes20134 жыл бұрын
Great! I ordered it yesterday.
@broguemotorcycles4 жыл бұрын
@@ginnystokes2013 Thanks for the order!
@larespuertorico3 жыл бұрын
that bike would look real nice with an led headlight
@broguemotorcycles3 жыл бұрын
It really would!
@ginnystokes20134 жыл бұрын
How to dress up the muffler clamp?
@broguemotorcycles4 жыл бұрын
So sorry but there is no way to use the stock heat shield. We think if you position the T clamp in-ward everything looks perfect.
@larespuertorico3 жыл бұрын
just found one today but the guy is asking 2800 for it I'm undecided