Tuber W&H type AE2130/80 of 1973

Tuber W&H type AE2130/80 of 1973. Straight cut only. For tube widths: 300-800mm. Straight cut lenghts from 500 to 1650mm. Paper roll width of 1630mm. Max reel diam. of 1300mm. Max production of 200tubes/min. according to the no of plies and cut lengths. No of plies: 5. Unwinder type: standard W&H with manual reel change, with manual lateral register and cone shafts. Lateral web guide G.W.D. system for 5 plies. With “S” type pulling system, longitudinal register system at the inlet, with thumb hole cut unit. Gluing system for 5 plies. Longitudinal disc type gluing system. With tube formation table. Cut head model AE2130 with perforation system, rotative knife, PIV system for the cut length adjustment. From 500 to 1200mm by 5 mm pitch and from 500 to 1650mm tube lengths by 10mm pitch. This job is done by means of 16 cut gears, with ejection system.No in-line flexo. Included is a photocell for pre-printed reels. With Gartemann&Hollmann welding system type 631., with web guide + platform. With additional unwinder for film reels. Electric cabinet. Tube packetizer by ICOMA. Visible in production. Available by August 2015 if unsold.