Tumbler Template- Glitter first? Tumbler tutorial

[@masayocole2713]

Thank you for taking the time to provide such a detailed tutorial. You are appreciated.

[@LaurenQuigleyCreations]

You're so so welcome!

[@danyellebray1811]

I've used the Windex method for application, you can move around...take off the paper, spray with windex on the adhesive, position design, let dry, add epoxy/triple thick/crystalac etc. DONE!

[@LaurenQuigleyCreations]

Thank you babe! 😊

[@angelalacks1304]

You can also use just dish soap and water. Much cheaper lol. Wet method is so much easier with these templates

[@jerridyke68]

Your technique is flawless! Even with the vinyl stretching, it still lined up perfectly. Thank you for sharing with us your findings and your skill. Much appreciated.

[@LaurenQuigleyCreations]

Awwww you're so welcome, Jerri!!

[@summerrundblade2423]

Love them all! ❤

[@LaurenQuigleyCreations]

Thank you so much!

[@1979decker]

Thanks for your insight on this method. I am currently trying to use this method. I'm using the expressIT double-sided adhesive. After glittering and sealing with glitter glue, I'm putting a few layers of Brite tone on it to see if maybe that helps with it being less rigid going on. Watching a full explanation definitely helped. THANKS!

[@LaurenQuigleyCreations]

You're so welcome!

[@shanesgoddess]

Some people are applying it to the tumbler using the wet method using a little bit of Windex. I am getting ready to cut my first one. Nervous but excited. Thanks for the tutorial.

[@LaurenQuigleyCreations]

Yes! I love the wet method as well! And you're so welcome!

[@candace1103]

They are are beautiful! Great colors choices

[@LaurenQuigleyCreations]

Thank you so much!

[@debbiehattersley5155]

Another beautiful cup!!!

[@LaurenQuigleyCreations]

Thanks Debbie!!

[@adijat7508]

Thanks for testing it out! I would cry if I messed up the application after all that pretty glitter work lol

[@LaurenQuigleyCreations]

me too girl!!!

[@megganlloyd4288]

put the adhesive on a sheet of vinyl first, then glitter, then apply. That's how Linda Davis at ElleBee creates does it.

[@LaurenQuigleyCreations]

Love Linda! 🥰

[@andreinare6127]

Omg that was so beautiful and so relaxing to whatch, can i ask what setting did you use to cut the silhouette paper, i cuted it and it was to deep 😩

[@kendramcgahee217]

Thank you for showing us! I saw that tiktok also!

[@LaurenQuigleyCreations]

You're so welcome

[@MariaDavidsonsondais]

I have seen several tumbler makers apply their pre glittered double sided tape using the wet method.

[@CorrineA]

Thank you so much for the comparison! So helpful!

[@LaurenQuigleyCreations]

You're very welcome!

[@joycepugh5347]

thanks so much for this awesome share

[@LaurenQuigleyCreations]

You're so welcome!

[@kellymaldia128]

What about making a slit in the backing at the middle? You’d have center in and you could move side to side to apply it. If I’m using blinged out vinyl, that’s how I apply it.

[@1979decker]

I really like this idea. I will have to try this.

[@LaurenQuigleyCreations]

Great idea!

[@tturner2042]

Could you do a light spray if water to the tumbler then push / wrap the vinyl out. Would that work to give me a little more adjustment time?

[@LaurenQuigleyCreations]

Yes absolutely! That's called the wet method :-)

[@mariellee4942]

What settings did you use to cut the 3M tape ? I have a cricut

[@ErikaMoore85]

Thank you for this tutorial. Can’t wait to hear how the new double sided adhesive works. If you don’t mind me asking what colors did you use for your first tumbler? I love that pink!

[@LaurenQuigleyCreations]

It's from my Retro Rainbow fine cut glitter set, i have it linked in the description box 💕the individual color is Lust

[@ErikaMoore85]

@@LaurenQuigleyCreations perfect I bought both sets in fine and chunky. Thank you so much.

[@LaurenQuigleyCreations]

@@ErikaMoore85 you're so welcome! They will not disappoint!

[@MrRottweiler72]

Can tou use the water technique to apply the tape?

[@MissGlenda1965]

What cut settings did you use so it doesn't cut all the way through? Those colors are so beautiful 😍❤️

[@LaurenQuigleyCreations]

Hi Glenda! Washi tape setting 💕

[@sfernandez75]

Thank you!!

[@LovetoSmile1221]

Thank you for your helpful findings. The colors are absolutely beautiful. What colors did you use for the last tumbler?

[@LaurenQuigleyCreations]

Thank you! I will have to do back and look but they're from Glitter Heart Co ❤️

[@prettythingsmadeforyou]

I found the less expensive 3m one did not have very good color saturation. I am having to go back and use glue to give a 2nd coat to salvage my tumbler. Just letting you know. I love your creations by the way!

[@LaurenQuigleyCreations]

Totally great information! I know the 3M I use is a pricey for some! Also using metallic glitters instead of transparent or opalescent will help too

[@loridoyle9101]

How do you keep the pieces from coming apart, since it’s cut to come apart? I hope this makes sense, lol. When I tried, I had diamond shapes (argyle) everywhere bc everything was sticky. And yes I did seal it clear rust oleum first.

[@LaurenQuigleyCreations]

You should only be cutting through the very first layer of your template. I use washi tape setting for mine :-)

[@TLT7566]

How do you export the template from DS? Or do you use a different program to create

[@LaurenQuigleyCreations]

This file is from Ellebeecreates and you can just load it right into Cricut design space :-)

[@Trina7594]

I just ordered anti-scratch cat training tape. It comes in a pack of 10 12x17 sheets for 9.95. I hear it has strong adhesive quality, have you tried using it yet?

[@LaurenQuigleyCreations]

I've heard of this! Some of the babes in my Creative Community told me about it! When I get back from Spring Break I will try it out 💕

[@jamiepfeiffer6005]

How do you do this ? Do you get a template and put in your circut and it cuts it ? Of how does that work ?

[@LaurenQuigleyCreations]

Yes that's exactly how you do it. You use a double sided adhesive sheet, cut the template with your Cricut

[@jamiepfeiffer6005]

@@LaurenQuigleyCreations what size do you size yours ?

[@jamiepfeiffer6005]

@@LaurenQuigleyCreations I tried to just use vinyl and glitter on the tumbler but I can’t seems to get it on straight I’ve wasted so much vinyl

[@LaurenQuigleyCreations]

@@jamiepfeiffer6005 it definitely takes practice! Have you ever tried the Wet Method?? It will be more forgiving and help you get it on straight

[@nicolesnowden1145]

What setting do you use to cut the template? When I tried, it cut through the whole sheet

[@LaurenQuigleyCreations]

Washi tape!

[@meganfouks7162]

I used that setting and it was fabulous- however how do you get the paper off! I’m having the hardest time removing the paper to glitter without taking up the double sided tape- and I’m being overly cautious but the tape just wants to come up with it 😭

[@LaurenQuigleyCreations]

@@meganfouks7162 oh no! Did it cut through the 2nd layer??

[@kirklanddesignshop8700]

I use this for adhesive on wood, next time try to seal with plastidip

[@LaurenQuigleyCreations]

I have plastidip! I will definitely give that a try 💕

[@adijat7508]

Am I crazy for thinking PlastiDip may help?

[@LaurenQuigleyCreations]

Oh that's a great idea! You're not crazy for thinking that at all

[@adijat7508]

@@LaurenQuigleyCreations if I try it, I’ll report back!

[@LaurenQuigleyCreations]

@@adijat7508 I'm here for it! 💕