Tune Up on a New to Me John Deere x738

Just bought this John Deere x738 and wanted to get a fresh start in regards to maintenance.
In this video we change the oil, air filter, spark plugs, hydraulic oil and top off the coolant.
Support me on Patreon - / cheesingarage
John Deere Maintenance Kit - amzn.to/3M3JrzG
John Deere Cool-Gard II - amzn.to/3CrJoul
John Deere Hy-Gard - amzn.to/3RvEwc7
Stens Hydraulic Oil Filter - amzn.to/3yawfDG
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional cost to you! Thank you for supporting my page and helping me create more content!

[@russelllayman4017]

Awesome video friend! At 100 some hours with no trans oil I would of had second thoughts on buying so hope you got lucky. There is a fuel pressure relief screw to vent before changing the fuel filter. You definitely took the fear of doing this job out! Thanks

[@cheesingarage]

It wasn't empty just low, but no issues so far! Thanks for the heads up on the fuel vent. Glad my video helped, good luck with yours!

[@mbaker82]

I’m impressed how easy that looks. I’m also impressed you have an older x738 with only 112hours man. I knew it couldn’t be to high when I still seen the whiskers on those tires. lol. That was a find! Grats.

[@cheesingarage]

First time doing it, and yea it wasn't too bad. Just make sure you do a better job than I did at catching the oil haha. Thanks! I am excited about it

[@rayc6685]

Really well done video. Thanks for the detailed shots and your candid commentary. Going to do this same servicing on my x738 because the John Deere dealer near me can’t pick up my tractor for 2 weeks, and then at least more two weeks before I get to the front of the line for the servicing. Sort of ridiculous.

[@cheesingarage]

Thanks you, and good luck with yours! Wow, that's a long wait time for just basic maintenance.

[@Boobtube.]

dont know if you know this or not, but when checking the hydraulic fluid with dipstick (under the seat) You *do not* screw the stick into the hole. You just sit it on top, and than pull it out and check it. Also, you never should tighten oil filter with anything except your hands. Only turn it 3/4 more of a turn after the seal on filter touches the mating surface. I would guarantee you have the oil filter on *way to tight* , by using a ratchet to tighten it. If you ever use spark plugs that did not come in a oil change kit, never use the Gold Tipped spark plugs. {Plugs that actually have a gold tip that the plug wire goes over} they are junk and *Will* cause starting/running issues.

[@cheesingarage]

Thanks for the tips! For the oil filter, I run filters snug by hand and I only use the ratchet/socket for the 3/4 turn at the end. I can see how it looks like overtightened based on the way it was edited.

[@RCALivingStereo]

Just bought a brand new x738 Very good informative video on maintenance I was wondering how to change oil That tube is handy

[@cheesingarage]

Nice, glad you were able to pick one up! That drain is a nice addition to keep things clean...even though I still managed to spill my hydraulic oil everywhere haha

[@JR6424]

I see the hydro filter doesn’t come with the home maintenance kit, do you know what the correct part number is? Also, what’s the gap and torque specs on the spark plugs? Thanks for the great video!

[@cheesingarage]

Correct, I bought the hydro filter separate. The links to everything I used are in the description. I believe the torque on the spark plugs is 18ftlbs. Thanks for watching!

[@odaymarks]

With that having aluminum heads, wouldn't it be a good idea to use some anti seize on those spark plugs?

[@cheesingarage]

Most spark plug manufactures I've seen recommend against using anti seize compounds because the plugs already come with an anti corrosion coating on them. I've never used anti seize on spark plugs before and I have never had an issue as long as they weren't over tightened when installed.

[@stevehoward2827]

I'm picking up a x730 this weekend, and will be doing this same kit. But since mine is 2wd, I'm assuming there is no hydraulic fluid in the front axle? I want to get everything done now, so I can go forward knowing everything is fresh.

[@cheesingarage]

Hm...I am not sure if you would have hydraulic fluid in the from axle or not. Let me know when you find out.

[@user-yg5qs9kc4r]

Definitly no fluid in front. 😂

[@RCALivingStereo]

You did a great job I’m looking at buying a new x738 so it lets me know what maintenance I’d need to do Thanks

[@cheesingarage]

Glad it helped!

[@andrewsmith9980]

Is the transmission fluid shared with the axles?

[@cheesingarage]

My understanding is that the hydraulic oil is shared with the transmission, front and rear axle, and the lifting hydraulics (mow deck/blower/plow)

[@MrSteve8511]

How does it cut compared to a zero turn?

[@cheesingarage]

I don't have any personal experience with zero turns, so I cant really give too much insight. I would think for just cutting grass, the zero turn would be better as that is all it is built for. I use this for mowing, snow blowing and towing a small trailer for yard work. For me, this is the better option but depending on what your looking for, that might not be the case.