Turbo Ford 8N

  Рет қаралды 5,078

One more cast Outdoors

One more cast Outdoors

Күн бұрын

Пікірлер: 17
@frederickjeremy
@frederickjeremy 2 ай бұрын
I have wanted to do this to my 9n. Was planning on getting an rhb31 turbo to go on it. I figure if i could boost it up to about 50 hp that would get the full 25 kw out of my pto driven generator i use to run my house tho i dont need that much. Also would make bushogging thick grass a different experience to hit a thick patch and hear it spool up instead of bog. Best i reasearched the internals would easily hold up to it, but i dont think the cooling system would handle it. Oh well. It is a neat thought. Those low compression engines are basicly built to boost. They accept it really well.
@onemorecastoutdoors
@onemorecastoutdoors 2 ай бұрын
@@frederickjeremy the sound alone is worth it haha, but it definitely helps when pulling a blade up my driveway, knock on wood I have had any issues with cooling, but I haven’t run a brush hog with it since adding the turbo
@curtisdowling3773
@curtisdowling3773 Ай бұрын
Awesome!!!!
@trevorlaquale6602
@trevorlaquale6602 5 ай бұрын
I made a custom manifold for the same turbo on my 8n just could never get it running right so it's just hanging in my garage, needs to be decked a little bit etc but carb fits in stock location for governor
@buckeye1034
@buckeye1034 4 ай бұрын
You wanna sell that manifold?
@greasemonkeyradio1279
@greasemonkeyradio1279 9 ай бұрын
Great sound!
@gregkocher5352
@gregkocher5352 9 ай бұрын
I just saw this! Are familiar with the bracket, pulley, etc that is below your air filter? Those are for a Dearborn 14-4 mid belly moumt sickle bar. Set them aside to have room ror the turbo hardware, lol. Also some parts below the clutch. I've daydreamed about doing this. But for me a Sherman step down low range would be useful. Have fun! I should say if you are new to these, they will do a wheelie and the front flip over and kill you.
@onemorecastoutdoors
@onemorecastoutdoors 9 ай бұрын
When I bought it the guy told me about the sickle bar mount it’s pretty neat and all in really good shape. In the process of remaking the turbo setup at the moment, I just threw this setup together to see if it would actually work . It’s been a lot of fun runs surprisingly well and sounds even better . Thanks for watching!
@owenmustard2762
@owenmustard2762 6 ай бұрын
So I have a rebuilt 9n and I was wanting to turbo it but I was told it would blow the head gasket and is yours oil cooled what psi is your turbo (I’m a little late but hope for a response)
@onemorecastoutdoors
@onemorecastoutdoors 6 ай бұрын
I’m keeping it around 5psi anymore then that it doesn’t have enough fuel, I really didn’t think it would work but I wanted to try it , so far it has been working great . The tractor gets worked pretty hard a couple times a week no issues so far , knock on wood
@negativefishermen9286
@negativefishermen9286 7 ай бұрын
Please finish this project completely and maybe get some dyno numbers🤭😳😳😳😳 I have a ford 640 I really want to do this too. Most online condemn it but you seem to be having success. Can you tell any power increase?
@onemorecastoutdoors
@onemorecastoutdoors 7 ай бұрын
I still have some kinks to work out but it’s been great, I’ve been using it hard the last couple weeks you can definitely tell a difference. I will make another video soon
@negativefishermen9286
@negativefishermen9286 7 ай бұрын
@@onemorecastoutdoors thanks for the reply, I’ll be on the lookout for your next video!
@scottbehr5690
@scottbehr5690 9 ай бұрын
You should put a 302 in that thing...then the turbo!
@ikocher
@ikocher 9 ай бұрын
Weelllll I think I know what I need to do to the Massey.
@SunnySunny-jz8kg
@SunnySunny-jz8kg 9 ай бұрын
some how I don't thing that marvel schebler is a blow through design.
@onemorecastoutdoors
@onemorecastoutdoors 9 ай бұрын
It sure isn’t, but you just watched a video of a China version with a little tweaking running just fine on low boost lol. I never thought it would but it does really well actually
Replacing Ford 8n Clutch and Brakes | Restoration Pt 2
37:45
Andrew Hanna
Рет қаралды 258 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 13 МЛН
Чистка воды совком от денег
00:32
FD Vasya
Рет қаралды 6 МЛН
УДИВИЛ ВСЕХ СВОИМ УХОДОМ!😳 #shorts
00:49
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 8 МЛН
Junk yard FORD 8n restoration from START to FINISH!!
27:30
Missing Wrenches Garage
Рет қаралды 3,2 М.
1952 Ford 8N with Dearborn Sicklebar Mower
3:59
Primerk5
Рет қаралды 16 М.
30 years parked will it start Ford 2n tractor 9n 8n
28:07
Sleeperdude
Рет қаралды 1,7 МЛН
Ford 8N Plowing Snow in Blizzard
10:42
Humble Acres
Рет қаралды 66 М.
Will it run and drive? A 1952 Ford 8N tractor sitting for decades!
1:02:49
Changing the hydraulic fluid in a Ford 8N tractor
16:47
Simple Homestead
Рет қаралды 164 М.
A Hard Day's Work For An 8n Tractor
19:55
Carving A Path
Рет қаралды 245 М.
Just When I Thought It Couldn’t Get Any Worse! (Ford 8n Repair Gone Wrong)
20:01
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 13 МЛН