149€ Lidl Parkside® PTMI 180 A1 Tig Welder Unboxing and Test / Wig Schweißgerät

[@andywells397]

Ive only been welding for 45 yrs, that little unit is a very capable little machine in the right hands. Excellent value for money.

[@Subgunman]

Too bad it is only DC. Be nice if it also had AC for aluminum.

[@andywells397]

@@Subgunman not for that money, no hf start either 😪

[@Gagibit]

@@Subgunman to have AC option you would need an extra unit box of size like this one is since AC requires complete electronic that turns DC into AC

[@stephenfox5133]

Andy, is it a suitable unit with which to learn how to weld? Or too specialised? It’s a skill I’d love to acquire (tinkering on the farm etc) but I’m starting from zero knowledge of the subject. ..TIG/MIG/Arc/ Oxy Acetelyne… it’s a bit overwhelming to be honest but that unit is a cheap mistake to make, if I can put it like that😅

[@JasonKane77]

Stephen, Get a mig welder to learn with, far easier to start then once your happy then progress onto tig (bit harder to learn right) thats what ive done

[@davidrussell6165]

Bought one and I am impressed with the unit. There is no soft start or adjustable slope off but unless the weld is to be extracted it is not a real problem. For the money it's great value

[@davidrussell6165]

Extracted should read exrayed

[@matthieuvdb]

I agree💪👍

[@barcamoreno1034]

Do you think it will be possible to welding aluminium with the Argon ?

[@kalleklp7291]

For 150 € you get a DC TIG welder that also welds stick. That is unbeatable guys! For those who complain about the missing AC welding for aluminum: 1. It would require the whole electronics that produce AC welding current and the different forms of pulses. It would be at a higher cost and it would be a higher weight. 2. How many times do you ACTUALLY need to weld in aluminum? If you have a minimum of stuff to be TIG welded and/or want to learn how to weld ..buy it.

[@johnbower]

If you were welding on a clean steel bench getting a good earth you would be able to reduce the amps by around 50% and get a better result.

[@grotbagsification]

From darning socks to welding girders very versatile

[@Subgunman]

It would be nice if Lidl brought some of these tools to Greece.

[@darrenstephens4412]

I just bought one, I was not expecting that it would be this good👍

[@dafxf9668]

I'm thinking of buying one.you think it good buy going to be using it fix hairline crack in alloys wheels

[@diyhard666]

@@dafxf9668 🤣 that was a tough one

[@ajwalou-nack2343]

I've got one with all the gear and owned it about 2 years and never used it . God knows why I brought it as I've no hands and completely blind. When I was shopping at Lidl I thought I was getting a Lidl bear . When I drove home my wife gave me an earful as that is what she wanted. It's all sorted now as I'm completely deaf now . They sell some good gear at Lidl s these days . So I'm told .

[@pierpa_76pierpaolo]

Better TIG or LASER? Costs of difference? I'm interested in for an aluminum metal/steel 3D printer. Please let me know. Thank you very much.

[@sciCHD]

Looks like an Nespresso coffee Machine, does it do the coffee as well ?

[@brunoblanc9883]

Il faut savoir que la masse joue un rôle primordiale dans le soudage. Pour se faire vous pouvez améliorer celle-ci et l'adaptée à vos besoins. Commencez par fixez la masse sur un fer rond de diamètre 10mm de LG 30cm environ faite une pointe d'un côté et de l'autre soudez un fer plat pour y fixer la masse . A10cm de la pointe, pliez à l'équerre ou approchant. La pointe sera placée sur la pièce pour le contact Placez ce prolongement de la masse sur la pièce à souder. Cela facilitera l'amorçage qui est primordial. Attention à l'électrode Tungstène (ne pas innaler les poussières du meulage de l'électrode tungstène, elles sont hyper nocives pour les poumons ).

[@abbasghasemi757]

Ja ich werde krank mit schweißen Arbeitet

[@brunoblanc9883]

@@abbasghasemi757 je regarde la traduction ce soir et je vous réponds. Bonne journée.

[@brunoblanc9883]

@@jeanjacquesparis9300 merci pour cette leçon de vie. Là, je parlais de technique. Désolé de vous avoir offensé. Quant à l'orthographe et la grammaire, ce sont des outils de communication importants et comme vous le dites ci bien, je le faisais pour rendre service et non pour vous offenser.

[@jeanjacquesparis9300]

@@brunoblanc9883 Merci de m'avoir entendu, vous n'avez offensé que nos ancêtres, j'ai l'habitude de l'arrogance moderne française. Je ne parlais pas de l'orthographe mais de notre langue le français qui véhiculait un message qui desservait tous les français (nous faire mal voir). On doit redevenir ce que nous étions, des gens spirituels au sens chrétien qui avaient du savoir vivre. Quand nous parlons à des étrangers, nous devons faire en sorte qu'ils aiment notre manière d'être comme nos ancêtres forçaient le respect. Je ne vous apprend pas qu'on peut modifier les messages dans youtube, vous seriez bien inspiré de le rendre plus respectueux de votre interlocuteur. Par ailleurs, je suis admiratif de vos compétences en soudure, c'est un domaine que je ne connais pas du tout.

[@brunoblanc9883]

@@jeanjacquesparis9300 merci de m'avoir sollicité. La modification est faite. Il est vrai que l'introduction était affligeante.

[@Frifeank]

Para lo pequeña q es funciona muy bien, me gusta bastante, para hacer cosas x casa

[@gordonmacaulay4848]

I wonder just how much better it would have been with a decent ground?

[@GavinFreedomLover]

I bought a plasma cutter from Lidl. The first thing I did was swap out the awful earth lead

[@BensWorkshop]

Earth lead works fine in mine.

[@Turbo2Pete]

@@GavinFreedomLover problem wasn't the lo ead, it was the "table" he was using as a ground...

[@jasonbainbridge7610]

@Paulo José next week he can test the lidl sander lol

[@WolfiePeters]

It looks like the Autojack that B&Q sell in the UK at £99. I don't know for sure if it is exactly the same.

[@theodwrosparaskakis5656]

This machine welding without using extra gas??

[@kenprouse5840]

If you used a couple of more pieces of rusty steel you could get an even worse ground so you would have even more trouble.

[@Thcj1973]

Pull yer neck in kendo

[@kenprouse5840]

@@Thcj1973 Hi Thomas. I have been a high pressure pie welder for 50 years. So I do know what I am talking about, but thanks for the comment, and have a nice day.

[@kenprouse5840]

@@Thcj1973 hahahaha pipe welder not pie welder, I can weld not spell.

[@Thcj1973]

@@kenprouse5840 welded plenty ah pie’s in ma time aswell kendo😂😂😂😂

[@cipriansorineltanasa1832]

Tig welding merge foarte prost. Electrodul e varză. Nu merită 150 Euro

[@hvymax]

Never know what you'll find at Lidl!!!

[@onenessseeker5683]

a load of crap

[@diyhard666]

Well they don't sell professional equipment and they don't attend to. *You get what you pay for.* For example what can you expect from a 79€ bandsaw? The same cheap and flimsy tool you get from any other brand at this price. I find it always funny if people buy for cheap and expect they get gold. And then wonder if everything is produced in far east and western quality companies die.

[@frankkante7850]

gut erklärt + gut gezeigt. Like it

[@Frifeank]

Me gusta hacer algún portal para vecinos, q siempre me dicen si les puedo hacer alguno q otro. En mi tiempo libre, me divierto y paso el tiempo entretenido.

[@tomislavmijailovic5829]

Da li je u pitanju Ac-DC aparat

[@londonjacks8371]

Not familiar with this welding method, only ever used an arc welder, what is the rod he’s holding?

[@3rr0rX]

Filler wire.

[@londonjacks8371]

@@3rr0rX Thank you

[@VanDerLaars]

Why does it get stuck sll the time????

[@Je-Welds]

Me I ask what is the duty cycle at 180 amps ?

[@johnnyconcrete5257]

It would be low

[@Wardani81]

How to order sir how much i from indonesia Kalimantan barat Singkawang city

[@kaapeliman6716]

IS this alumiun to

[@vebtupaz]

Per comprarla come devo fare

[@umbertolombardo4034]

La si può ordinare direttamente alla fabbrica?

[@rudychiodini3579]

Fino a che elettrodi ti tira? Sia rutile che basico.

[@hansulrichramp210]

Warum reisst er am Nahtende jeweils den Brenner weg, anstelle einfach den Stromknopf loszulassen?

[@philipkrger]

Das Gerät hat nur eine Streichzündung, dementsprechend keinen Taster zum Starten des Prozesses

[@OjciecSynojca]

Das ist Tig scratch or lift, hot TIG HF

[@hosey31]

what needs to be changed to weld stainless?

[@nightwingjattibanez]

You'll just need stainless filler rod

[@DEVINE.IMAGE.]

Do you have to touch the metal with the tip to start it im trying to learn and im just melting through these tips not as easy as it looks 😅 🤔

[@sitgesvillaapartmentneilsc7924]

yes....scratch start like MMA

[@NestorPineiro]

Scratch start is the worst method. Lift Tig is present in most low price equipment: you touch slightly with tungsten's tip and it happens. HF (high frequency) start method is for higher price gear. Surely this TIG is a LiftTig machine.

[@DEVINE.IMAGE.]

@@NestorPineiro i run out of tips and gave up my have another pop at it in the summer

[@georges8408]

does it work without gas ?

[@bobbyfindlay6863]

No

[@blizteredthumbs7911]

I'm doing a learning course in December. I want to remodel my exhaust as well as make custom bits. So what's the verdict on this piece of kit ? Is it perfectly acceptable or is it a piece of shite? Be honest. I seen these in lidl and gave the wife an elbow and wink for my birthday.

[@MugenziPatrick]

How much machine

[@davidcarroll2035]

You are obviously an experienced welder, I’m a complete idiot. I must say that you have shown the welder to be up to home use, very impressive I might say, though how long it continues to perform like that is unknown by me at least. Thanks Dave

[@claytonchristophersen1633]

David you can do much better for your Dollar /Pound , have a look at the Rossi Mishto range . Lift Tig or HF Tig , that was only a scratch start Arc . 30 pound .

[@Weldinginlove]

Nice machine welding. . 😍

[@RixtronixLAB]

Creative video, thanks :)

[@toppladurraimisen6952]

So que esse produto não tem em portugal. Se alguém souber por favor me avise.

[@RogerioSilva-xv3mx]

Procura no site da " Parkside", lá podes encontrar todas as ferramentas, acessórios e peças de substituição porque geralmente o Lidl vende só a máquina/ferramenta básica .

[@elctrozone93dups]

Lucktoff??

[@fabiograsselli8060]

Dove trovare questa saldatrice

[@rjlinnovations1516]

Thanks for sharing your excellent video tutorials about the tig welding. I’m interested buying one for my personal project. Watching here with full support from Canada 🇨🇦.

[@weldingbilgin]

Çok güzel bir paylaşım 🤝🇹🇷

[@ramonb3821]

Podria haber puesto el factor de marcha de la maquina... El problema de estas maquinas son que oes falta la alta frequencia (HF) y que se pierde mucho gas con la ruleta de paso...

[@fspeciale78]

Rien que les 22 premières secondes du déballage me stupéfait. 3 emballages cartons, n'y a t-il pas un problème 😱

[@ozonem3]

Gas??

[@joseluisbustos2692]

La soldadora parkside tiene su hermano gemelo la lusqtoff iron 300 black , ahí se da cuenta uno que compran estas soldadora y les ponen su marca.

[@georgemikael9043]

Tig?

[@جوكركورببيه]

جوده بل العراق شكد السعر رايد وحده

[@georgemikael9043]

Mig?

[@albertbell7120]

Where can I purchase one … as my store never has

[@karlgustav5490]

website

[@laurentoutan9922]

Bonjour est ce qu il faut de l argon avec ou juste de l air comprimé ? Merci

[@DP-kg5yj]

Argon pur

[@leeloxleigh1471]

Argon

[@gerhardscheffer5503]

Scheint gut zu funktionieren top

[@pcb1962]

Don't like the scratch start, makes it 10x harder for a beginner, worth paying the extra for HF start

[@evgenitantikov5865]

It has a tiglift function, just for some reason the guy here tries to scratch start it

[@Jake-long]

I just think how long this machine can last in use, I myself have used various brands of TIG machines from national brands, w.i.m, hyundai and riland, small TIG machines I have used hyundai and riland, but riland is the best

[@mancit79]

Sir how to order this produk welding machine thanks you

[@davidmunroeprecisionengine6121]

It's enormous, couldn't you find a small one?

[@jairlaurindogomes5928]

Qual o preço dessa máquina

[@gerafer1351]

Onde compro uma dessa🇧🇷 no Brasil

[@farideli1107]

I can bring you one when i come to brazil

[@klyddmeisters]

never sharpen the tungsten to the tip. Always from the tip and up.

[@peterrottenhoffer9535]

???

[@luismatos2312]

Hola vienen a tienda yo estoy en canarias y no hacen envíos aquí como la consigo gracias

[@diyhard666]

Parkside es la marca propia de la tienda de descuento alemana LIDL. También tienen una tienda en línea. Aunque operan en todo el mundo, no sé si están en su área. Pero he visto que estas herramientas se venden nuevas por terceros en eBay y tal

[@abbasghasemi757]

Googele mit bild suchen

[@jeyanthitherce7274]

Cyprus available

[@ricardoklose]

mach nächstes mal ein Filter auf die Linse ist besser für die Augen des Zuschauers, ansonsten Top 👌👌👍👍

[@ashleymcgovern5120]

Did you test the arc ability as well?

[@ianluce9297]

I brought one and tried it on arc and i must say i was impressed no build-up just wetted into the base material like a fusion weld

[@КостяКулачихин-у6х]

Вопрос к знатокам. Тиг сварной нельзя варить углекислотой, а смесью можно?

[@ramonb3821]

No, sólo Argón o Helio

[@chriswood9821]

Are you using argon or mix

[@scottishLad91]

Better using argon

[@gopanmuth9910]

Price

[@TheVmaxnik]

Search

[@nasa3760]

Aluminum can do it?

[@turboschneider6407]

No

[@claytonchristophersen1633]

no

[@ashleymcgovern5120]

Surely if you get aluminium welding rods instead of mild steel then yes. Tig is the process what usually gets used for that.

[@MarkDavies4281]

@@ashleymcgovern5120 DC machine not AC so can't do alloy I'm afraid

[@evgenitantikov5865]

@@MarkDavies4281 wrong

[@ramkarmakar6580]

PRISE

[@diegosantacruz3540]

Hola donde se consigue la maquina?¿hacen envíos?

[@diyhard666]

Parkside is the own brand of the german discounter LIDL. They also have an online store. Maybe they have one in your area. Sometimes these tools are sold on eBay.

[@steelmill]

Did they really need to give you a chipping hammer with a tig machine?

[@leeloxleigh1471]

It is also a stick / arc welder

[@Turbo2Pete]

Add a switch it could be much better..... if I didn't have a big machine already this would be fine for my few projects.

[@lorenzovalletti9737]

Is this for aluminium?

[@turboschneider6407]

No

[@SwampthingDUK]

Stainless steel, steel use DC current, aluminium uses AC/DC current. AC/DC tig welders are a lot more expensive

[@junaljasolay5745]

You're using argon gas?

[@SwampthingDUK]

@@junaljasolay5745 unless it thick aluminium which you can use a argon/helium mix as it increases the arc temperature

[@leeloxleigh1471]

No

[@georgemikael9043]

50€?

[@rildocaldas6413]

Onde vende esse equipamento? 🇧🇷

[@ОдилМавланов-п3н]

Ока. Кантачкан. Кандай. Ишлатад

[@sthildas4857]

I have waited 12 weeks for my machine to be repaired,so I would not bother...🇬🇧

[@dracar5268]

Ахуеть! чувак ты варишь на 160 амп. в резиновых перчатках, да ты монстр :)

[@japhetparker]

Au Monde quel pays qui fait bien La tiyoteri

[@gunnarengberg5441]

Varför kan man inte se var man köper Parksides produkt PTMI180 A1

[@missme9247]

What kind of gas does tig use? What coupler sis you buy for the gs?

[@nathanlewis5682]

Argon

[@billgriffin7346]

Argon

[@BestUserNameUK]

Pure Argon usually, although other mixes are job specific.

[@barssound]

Love to learn this. I wanna make a bike frame

[@cristianoteixeira235]

this kind of TIG welding is not difficult, you have youtube tuturials that can help you. Pipes is a different story... but dont forget argon is not cheap

[@husaeensaadeh3606]

Why no have switch and the welding is black? The good welding is color gold

[@BlindingSun_]

Yeah that’s not how it works

[@homedecoratechannel8840]

Please link in India

[@tobikruse11]

Hat das Gerät nur lift arc?

[@moacirpereira3440]

Preciso comprar onde veja a proposta

[@dmartinr41]

video description

[@samosam2812]

box in a box in a box :)

[@miguelbarbosa9134]

Onde eu compro essa máquina

[@diyhard666]

Parkside es la marca propia de la tienda de descuento alemana LIDL. También tienen una tienda en línea. Aunque operan en todo el mundo, no sé si están en su área. Pero he visto que estas herramientas se venden nuevas por terceros en eBay y tal Parkside is the own brand of German discounter LIDL. They also have an online store. Although they operate worldwide I don't know if they are in your area. But I've seen that these tools are sold brand new by third parties on eBay and such

[@Elbandidos.PORTOCORSE]

Si vous voulez monter aux personnes comment ils faut faire. Essayez au moins de le faire bien car la sur de petites pièces, coller le tungstène si souvent pas très pro

[@alexporee5201]

C'est clair poste tig pour bricolo il n'est pas équipé de hf normal d'être obligé de colle pour démarrer la soudure.

[@hvymax]

With all the Everlast, Yeswelder, Harbor Freight etc available I don't think I'm going to buy a grocery store welder.

[@diyhard666]

@Homie true And even if they sell crappy tools they are still cheaper than the others. Always remember you get what you pay for.

[@ogri7]

@Homie I think is great when people talk about China Crap, China make crap because people want crap and want the crap as cheap as possible. China can and do manufacture quality products but be prepared to pay the prices.

[@ogri7]

@Homie Have you been to China? The £1 pair of scissors we find in Poundland they do not use etc, have you seen their infrastructure, construction, rail systems, medical advancements, technology advancement etc etc. Of course, Taiwan, Japan, Korea etc of course, have an input in their manufacturing what country makes their own products in their entirety? Maybe you could do with a visit to China or at least do some research WITHOUT western propaganda. Back when the MADE in CHINA was rubbish it was a poor and different country, that said I mainly recall the made in Hong Kong as being rubbish and it was under British control. The Chinese will cater for your needs and wants. Mr Trump blamed CHIA CHINA CHINA not only on the virus but on stealing US industry. NO. Mr Trump is apparently a capitalist. US industry realised they could take their manufacturing to China and have their products produced to the same quality at a much lower cost. Those counpanies brought the products back to the US and didn't sell it cheaper but at the same price hence higher profit. Do not underestimat China, India next then Africa.

[@jrrr2451]

Wowwww!!!!!

[@ramsessiregarramsessiregar4285]

Cek harga bos ki

[@lfmlokal-fernsehen9461]

Cool!

[@jek1997]

Per uso obbistico per saldare due piastrine potrebbe andare anche bene, appena la metti a lavoro su un 10 pollici schedula 80 nemmeno la prima passata finisci che si brucia🤣

[@FrankP83]

...is not that bad...right?!

[@brunodonini228]

Molto bella e compatta complimenti

[@felicianovolpe8816]

È pur sempre un giocattolo.

[@tiagomonteiro2678]

It would be so much better with a start/stop button...

[@johnnyconcrete5257]

Hf start would massively increase price

[@UrbanCha0s]

New to welding and saw your vid after seeing this for sale. More narration is required. I've no idea if this is an half descent welder or a POS. You give no clue on what you think

[@luigid9192]

ac dc?

[@leeloxleigh1471]

Dc only.

[@vladtheimposter3258]

Njam njam, grinding tasty ☢️radioactive☢️ thorium electrodes (the ones with the red mark) without protection... But with gloves on all the time it looks so professional🤣.

[@SurendarKumar-mz8qi]

Sir ye machine ketane ki hai con teckt number digiye

[@falsehood3314]

149 Euro