TURN $20 INTO $2000 (kind of)

[@RaphaelStarr]

One point of clarification. The Truthear Hexa is not $20. Otherwise, great info

[@Gizaudio]

Yes, it's $80. Good catch!!

[@selfdestructivef0rce]

@@Gizaudio question Tangzu wan' er or the Truthear Hexa if you could only pick one

[@mlagathomason2555]

@@selfdestructivef0rce hexa. If you have $80 get the hexa, if you don't then wan er

[@stanleyandi6420]

​@@selfdestructivef0rce monarch mk2 of course

[@mlagathomason2555]

@@selfdestructivef0rce hexa

[@eiko4252]

Another good use of autoeq is to tune your iem's to different reviewers targets (squigs have lot of different reviewer and their targets) and see whos preferences aligns with yours the most. So you know that if your preferences align with a reviewer, then that reviewer should carry a bit more weight in your decisions. Audio is subjective after all, we all have different ears and different tastes. Also you can try to use different reviewers measurements (as you can jump between reviewers in squigs), because they use different techniques and also there is some variance in the iems. So using one set of measurements might sound better for you specifically than another.

[@geereesh77]

Great to see daily videos, especially during the holidays!

[@Gizaudio]

2 More to go til new years

[@GrB-M]

It seems like the more videos you post the more respect I have. Youre doing a good job of adding value to this community and especially those getting into it. Just to expand on the inaccuracies using auto eq: One thing to keep in mind when using auto EQs is IEMs are tuned using physical methods that change the sound AFTER the driver/speaker produces it. If it cuts the output of a range of frequencies by 1/3 it’ll always do so even with EQ applied. In that case you could be listening at 90dB (for easy math, that’d be hearing damage loud) without eq then add 6dB using an EQ and you’ll end up with 92dB rather than the 96dB you’d be expecting. I’m not saying auto EQ isn’t an incredibly useful tool just that you can’t assume you’re getting the predicted frequency response out of your IEMs. You’re just changing the strength of the electrical signal going into the IEM.

[@Gizaudio]

Thanks man! And yes, I agree with everything here. I believe there are also other factors in play that affects the effectiveness of EQ as well. Might have to do an "Intermediate level" EQ video in the future.

[@slickytail]

Late reply, but need to nitpick here. The point you're making is true, that EQ interacts nonlinearly with physical tuning methods. However, decibels is a log scale. Reducing the amplitude of a sound by 1/3%, as in your example, is equivalent to cutting 1.76 dB. The real reason that you can't just "add 1.76 dB and have perfect sound", is that the frequency response of a speaker depends on the volume (this is nonlinear distortion).

[@goatmeatmigeat711]

This is a hall of Fame video for me! Thank you for explaining all of these things!This will help a lot of people who want better sound.

[@adandelgadillo7229]

Thank you Gizaudio. I’ve used the AutoEQ feature before but didn’t know about the going over $6000 hz rule. Now I know why those attempts sounded weird.

[@FranklynPearson]

What's, somewhat, interesting is 🎉 Crinicle video says to adjust from 200hz to 20khz

[@zDennii]

Very useful , I just bought EA500 months ago and it has for me the definition of High & Detail , its clear but not pircing in any way. I tweaked it with Eq into Falcon ultra with red noozle & the standard tips and it's so great.

[@raremilindchitale]

Hi, I have been watching your IEM reviews for some time now. I don't know if you would read, respond, react to this but a few days back I stumbled upon this video. It grabbed my attention. Recently I bought Truthear Hola. After watching this video I did lot of hard work, after lot many misses I now have 2/3 distinct sound signatures which are with lot of character, clarity and strength and very different from the relaxing but a bit mushy sound signature of Hola. I am getting tremendous pleasure by listening to these 250 to 2500 $ range IEM signatures. So I said I will say thank you to you for making it possible. Thank you.

[@StatesideBeast]

I'm just getting into IEMS. I don't plan on getting crazy expensive ones. IEMS: Linsoul KZ ZS10 Pro - $39.99 Wire: TRIPOWIN C8 8-Core Silver Copper Foil Braided Cable - $23.99 I just found my old Astro Mix Amp. It has a light buzz when no sounds is playing. It does improve the sound to me. Should I even use a amp with IEMS? do you have a budget one you could recommend?

[@Boemtie]

Wow i spend a few moments figuring this out but it worked. I tuned the Olina to the Melee with this, and omg... Now i have the Olina but with the bass of the Melee. and yes its better than the Melee or the Olina ( i have both) The second one i did was the Salnotes to the Ie300 and again omg! thank you for this :)! i am going to tune all my iems to things i like now haha.

[@garygriffiths7353]

Exceptionally good video. I’ve been in the hobby for about 10 years and even in learned something here. Keep it up Timmy

[@fahryst]

Thanks Timmy, this is actually a very informative video, miles better than "just use eq, lol" If you didn't, I was going to mention problems with eq and auto eq but you did a wonderful job there. If you allow me I'd like to add a few things. Wavelet app don't work with DAPs that bypass androids own equalizer/mixer, at least my iBasso DX300 doesn't and from what I learned there is no way to make it work for now. Secondly I use different gear, iems and headphones all the time and also review gear. While using equalizer apo there were times I forgot to change my eq settings and think like: "wait a minute this doesn't sound right", but that's a me thing :D Oh yes, if you use pc to listen to music, equalizer apo is very very good.

[@sonilee8066]

How about DAC? My iem have balance cable so i need DAC but i want to EQ it too

[@thenarrator1921]

On Android, I haven't seen anything even come close to Neutron Player's Parametric EQ. Highly recommend buying it especially when some eartips are more expensive than that, plus the recent version has in-app access to AutoEQ for lazy mode.

[@cediegarcia2585]

Didn't know they already have AutoEQ built-in. I bought Neutron years ago but I might look into it again. Thanks

[@estebanod]

Better than Poweramp EQ?

[@thenarrator1921]

@@estebanod for me, far far better. The control you have over Neutron Player is almost OCD heaven

[@rickybachtiar1474]

@@estebanod im using both poweramp eq and neutron player eq, the neutron peq is far more accurate and clean, you can cut very narrow bandwidth with very high precision without disturbing other frequency, great for retune harsh sounding iem

[@Bakashi]

​@@rickybachtiar1474Did you use Poweramp's Parametric EQ?

[@hermesjr.branzuela5271]

Happy new year Timmy! Thanks for the poisons this year! (Your aria and dioko reviews paved the way to my upgrade path)

[@VitorMach]

There's currently a bug in Wavelet when you delete and reimport a different EQ with a filename you already used previously. It will sometimes reimport the old EQ settings as if it's cached or something.

[@JoseFerreira-zb7wh]

I've imported and eq and applied it. Also tried other functions, but nothing works. There's no change to the sound whatsoever. DO you have any idea on what's happening?

[@VitorMach]

@@JoseFerreira-zb7wh Did you enable legacy mode? The normal mode is only compatible with certain apps, try legacy which is system-wide.

[@JoseFerreira-zb7wh]

@@VitorMach thanks. figured it out.

[@Weareonenation303]

EQing treble seems to be very inconsistent. Wavelet usually doesn't get it right. Bass and mids seem to be much easier to EQ in comparison.

[@Gizaudio]

Absolutely agree. That's why it's so important to already have good quality treble to start with.

[@eludee119]

eqing out the resonant peak is real easy with a tone generator and some knowledge with parametric eq

[@Gizaudio]

@@eludee119 yes, that's after some experience.

[@ruru4855]

Wavelet still uses graphic EQ and isn't really accurate in the treble. If you want to use parametric EQ in android you can use Poweramp Equalizer or if you're rooted, JamesDSP or Viper4Android

[@iMobinator]

if u use shallow qs to notch out higher frequencies, you probably get phasing which dulls the higher frequencies, need to use non linear eqs and am not sure if these eqs have a non linear/no phase mode

[@rigel8755]

I'd say that the true adventure (and awful sometimes) is actually tuning treble. If you're long enough into this, you'll know how to do it. And my tips as just a casual user that likes to fiddle around and see if things work out would be: anything in the treble region must have high Q values when you apply any gain, or else it'll bust out the entire region just by slight adjustments; You'll need to apply a *lot* of adjustments to get it ''right'', and the best way to tell if it's sounding somewhat cohesive and natural to you, is to... listen carefully, with tracks that you can clearly test this region. SO: use Q values above 2, avoid +10dB gains, only a few PK's won't do it probably - use it to abundance, and, listen carefully with appropriate audio to see if you're not messing things up. DON'T BELIEVE THE GRAPH, if you get to a fine treble tuning but the graph looks like mount everest, don't worry (as long as there's nothing clipping, or else you'll need to pre-amp with a negative volume to your highest peak on the FR). Usually EqualizerAPO tells and prevents clipping from happening. I can't say the same for Wavelet, it doesn't even translate treble well.

[@gs-nq6mw]

Hey I have a hearing loss in the upper frequêncies where the 15-16khx I can only hear at a higher volume, anyone knows if I can only increase those frequêncies(15khz+) without increase others?

[@rigel8755]

@@gs-nq6mw Try doing what i said and see if it gets more audible, don't apply +10dB gain tho.

[@rens3286]

Great video! Thank you very much for this tutorial, this really blew new life in my collection :) Keep it up!

[@SuperReview]

Thanks for doing this. I need to make an EQ tutorial on Squiglink soon.

[@Gizaudio]

Thanks for stopping by! Looking forward to it!

[@kawaiikoto8800]

How much is a limiting factor of the quality and type of the IEM drivers? Will autoEQ works when I want to stimulate a tribrid IEM using an IEM that only has single DD?

[@f_society91]

Im curious too.

[@DhikaRizkySumanto]

I really wanna know it too. But to anticipate the limiting factor, I just autoEQ single DD with another single DD to avoid error.

[@liruku7985]

I needed this video since such a long time!!

[@raphaeldiaz1769]

Thanks for the vid Timmy! EQ solves the issue of: *I should buy X IEM because it fixes the issues of my current IEM* To everyone who reads this: There is no such thing as a perfect IEM when you buy an X IEM because it *fixes* the issues of your current IEM there is a *VERY HIGH* chance that your new IEM has a different issue on a different frequency And you will repeat the same mindset Oh gosh my new IEM fixed my previous IEM's issues but I just wished this new one had less of this and more of that so maybe I should buy another which addressed the Issue and the cycle never ends The point of EQ is not to make your IEM sound perfect but to reduce the things we hate on our current IEMs after all like I said there is no *Perfect IEM* in any price range

[@gaikwadbharat42]

Good explanation i was struggling with my CCZ coffee bean IEM for EQ now it is resolved thanks :)

[@c4monkey]

Beryerdynamic 880 I wouldnt touch without eq. With heavy eq, I take them over $1k+ headphones. Eq is an amazing tool. Highly suggest oratory 1990s headphone eqs

[@estebanod]

That's what I kept thinking when watching reviews. People saying "it would be the perfect if it had 3 more dB in the bass" for example, always wondered why not just use an EQ and make it perfect ourself.

[@f_society91]

Hi, how can i use the bass of Sony, the midrange of monarch and the treble of anihilator on my Wan'er iem?

[@Bigdude0444]

@@f_society91 you probably could try. In this video it's shown that you can target specific areas.

[@CiceroFryman-t8n]

@@f_society91 If you combined this three,it will probably sounds like shit

[@iikatinggangsengii2471]

theres difference in iem that physically actually can do more bass and iem that forced to create more bass

[@wilcurran3377]

This was super helpful man, thanks for the info on EQ'ing.. can't wait to play around with it!

[@darylwayne611]

Thank you, just started watching your videos, Awesome content and delivery.. Found this one particularly relevant to me.. Thank you so much!! All the best!

[@nithinmalladi405]

Great video man! I've always heard reviewers talk about EQing but never understood how to do it 👍

[@jasongibson3574]

So basically Etymotic knows what they are doing when they build IEMs that need to shoved into your brain. Also with regular IEMs I've been having luck with the new TRN T-Ear tips.

[@mattparsons8598]

It's too bad they don't spend a bit of time learning about cables and the value of modular design. I've had some and did like their sound but I just can't get behind a fixed cable IEM in 2022

[@papervws]

i love my iphone.. sometimes. then there’s time like this where I got into the IEM hobby, and don’t have access to aptX or EQ, and I hate apple for it

[@Keemochi420]

this actually help tried Z1R EQ to my Moondrop KATO Gold/Brass with Azla Eartips and made it sound better or enjoyable to listen to music

[@shiro214okane]

I been tweaking my Moondrop Aria Snow Elysian Annihilator 2021(20k) auto EQ quite good, 2nd is auto EQ Mangird Xenns Top(6k) if i just want more bass for aria SE.

[@yvanaluz9994]

The 15 usd quarks dsp already do the harman target eq to such an accurate degree that some reviewers are saying it either competes or downright destroys other iems waaay above the 15usd price point. Would be interesting to know your thoughts.

[@yvanaluz9994]

@@scorpioassmodeusgtx1811 Ehh I don't know, as far as I know there is no objective way to measure resolution, soundstaging or imaging in iems aside from rather subjective takes that change from person to person, regardless, I think more people should pay more attention to the incoming dsp earphones from moondrop as I'm sure it will become a trend for other brands next year.

[@da3726]

Superb video. I found this extremely useful.

[@jeeewhyyypheee]

I got KZ ZSN Pro and QKZ x HBB, I tried EQ ing QKZ x HBB to make it brighter by manually hearing and going thru sliders. The result is amazing, it sound fuller and natural but also got the airyness. Compared to my ZSN Pro it already sound bright, I wanted to make it smoother and less sibilance

[@cediegarcia2585]

Can you share your EQ settings for QKZ x HBB? I find it lacking in the treble area

[@jeeewhyyypheee]

@@cediegarcia2585 I use HiBy music player, I just tune the MSEB actually, not really touched the EQ it self. I find it easier to use MSEB. If you also use HiBy music player then maybe I can share how I tune it

[@lrvan]

@@jeeewhyyypheee i'm using Hiby too, can you share it please? I wanna try it too

[@jeeewhyyypheee]

@@lrvan No problem, here's my tune. Just align it from top to bottom. -15, -5, -5, 0, 0, 0, 0, 0, 0, +15 It basically just reduce the bass making the attack a little bit faster, and adding 10k more air. Note, here I use sony wide bore tip on my QKZ x HBB to make the sound stage bit wider, that's all. I wanted to maintain the easy listening character

[@lrvan]

@@jeeewhyyypheee thank you! will try this with my moondrop tips.

[@mattparsons8598]

Was surprised you didn't mention the s12 or any of the popular planars. The s12 pro takes EQ exceptionally well.

[@Viewer13128]

do you know which IEMs take EQ well? E.g., MEST Indigo, V16 Divinity, etc.

[@mattparsons8598]

@@Viewer13128 No I don't have personal experience with a whole lot of IEM's.

[@mattparsons8598]

@@Viewer13128 you want IEM's with really low distortion ratings. Planar's typically have exceptionally low distortion. Dynamic drivers don't *tend* to fare quite as well

[@TheKrautrock]

Moondrop S8 with EQ'ing them to SA6 Ultra (on RME ADI-2 DAC) sounds spectacular. Thank you!

[@iisakei2369]

I hate EQ. Because, It is troublesome to change the EQ every time I change earphones or headphones.😑

[@gizmotis]

can't you make presets?

[@iisakei2369]

@@gizmotis I'm troublesome to press presets button.😓

[@ROCKSTAR3291]

Same, EQ just ruins my listening experience and it doesn't fix many things. Plus it's more fun to own several budget IEMs with different sound signatures.

[@johnt3500]

I tried EQ, but I always felt I was messing something up, or something wasn't right, or I could further improve something... This is very distracting, I can't enjoy music this way.

[@rokhamler3352]

Good double flange eartips for me are spinfit cp220 and cp240. Triple flange tips i have tried are too deep for me and they start irritating/itching the inside of my ear canal

[@Pizza____God]

W content right here. gonna play around with eq on my hexa all night now

[@yugoarchive]

Thank you Giz! I EQ'd my QKZ AK6 to the Moondrop Chu's and they sound way better now

[@morgannickw]

Thanks Timmy. Inspired to give parametric eq a go after this video. squig AutoEQ result for truthears zero to Sony IER-Z1R sounds fantastic - using jriver media center on PC to apply - happy new year!

[@sbc754]

hi, could you please post the numbers to this EQ?

[@Avantgardist]

Another tip to spot if your headphones / IEMs can be EQed well is to look at their distortion. The higher the distortion already is, the worse they will react to EQing. Edit : distortion is MUCH less audible in lower frequency, but suddenly starts becoming an issue in the mids.

[@f_society91]

Hi. I have 3 iems , x y z . How can i use the bass of x, the timbre(midrange)of y and the treble of y on my Wan'er iem? Do you understand what i mean?

[@Avantgardist]

@@f_society91 I get what you mean. So generally, you could split the method in the video into three different EQ profiles and add them together. In reality, this will only be an approximation as tempering with one frequency (or frequency range) will affect other frequencies. So if you'd really want to get accurate results, you'd need to apply an EQ setting, measure your IEMs again, apply yet the next EQ settings and get closer to your target response every time. You could also go the "manual" approach (graphic EQ) and try to create your own correction settings. In my experience that should leave you with better results and it will also teach you a bit of how your IEMs react to EQing. Good luck!

[@ugur3527]

Additionally balanced armature drivers has very high midrange distortion than dynamic drivers. DDs have bass distortion rather than midrange.

[@97Syahmie]

As someone who has the Dunu SNS tips, I'm so jealous your ears suit them well

[@Mixail747]

CP360 max diameter is 13mm, while S&S doesn't go over 11.5mm, how come? And S&S is only a smidge deeper, how do they manage to provide better isolation? Something about the material?

[@btfr5129]

Great auto eq overview!

[@WillA-wf4uu]

Nice EQing guidance’s ✌️peace

[@zakiidin]

Been using Wavelet App since last night... And saw this video today... Tried the pre set Auto EQs on my OH500, S6rui... And then the Tin P1... Wow... Now there's a newfound love for my P1.

[@Haziq.h3]

can that wavelet change the sound when playing KZbin also? or only affects downloaded song in the playlist

[@f_society91]

Im curious too.

[@rob541n7]

Use Legacy Mode

[@Klav1eR]

bro I thank you so much for the video, I am relatively new to the hobby, and your video is a godsend. Currently I am using Blessing 3, Kiwi Ear Cadenza, and Raptgo Hook X HBB paired with Fiio M11s. I autotuned my Blessing 3 low freq to Dusk 2 (love you Crin) and mid freq to S8 because I crave so much the extra bass on Blessing 3. Now I can use Blessing 3 as my daily driver. (btw I use Dunu S&S L as eartips because it is the best eartips in the universe, I have a lot of expensive eartips, you name it I have it). I cannot order Dusk 2 in Indonesia. My local audio shop said Moondrop prohibits Dusk 2 to be sold in Indonesia (what is your problem Moondrop???), but at least now I can taste it through Wavelet autotune

[@MrAlex5908]

How to actually implement these SQ tunings for IEMs? Just to copy the parameters and put them to PEQ of a DAP?

[@terrano4392]

Great video man❤❤❤❤❤

[@f_society91]

Wait , so the fact that some iems cost 500 or even 1000$ is because they have a different eq? Is not about the drivers and how they were built? 4 years ago i had Bose Soundsport iem and the sound was very nice, like a dolby or surround. If i eq the Waner like those Bose iem i will have the same sound even if they were built different?

[@Gizaudio]

I never said any of that lol. When you EQ, you just get a taste of that the other IEMs might sound like. It's not like trying the real thing.

[@f_society91]

@@Gizaudio maybe my question sounded provocative but wasn't, English is not my first language, i was just curious because im new to iems. I had wireless bose soundsport free in the past but battery died, the sound was epic for my ears. Now i have waner but sound normal nothing special, im not audiophile guy. I will try to EQ them ...

[@ryon1256]

Man, that's a present and I thank you. Didn't know of Squig.

[@bobbyl1670]

Another top tip is to remove any ear wax you might have

[@_vez]

Apple dongle or Audio interface definitely helps a little bit too + EQ + Good hardware can make a good IEM Like the Waner even better. PS: hair colour looks kinda nice it's definitely the cherry on top 😅

[@Gizaudio]

see what you did there lol

[@jlopez54]

Moondrop spring tips, best tips.

[@DotkesBoi]

Simple and helpful video!

[@PeaceHappiness-j7b]

Thank you for the good tips 👍

[@BijayRanjanPati]

What is good? TIN C2 Mech warrier or Tangzu Waner or Salnotes zero

[@ghoctav]

i can't use wavelet on my old phone , it doesn't support .. i use poweramp music player , happy customer for it .. and play with parametric eq .. yes , it worth for minor fixing .. hi timmy , any recommendations for almost dead flat iem for studio mixing ?

[@VitorMach]

Do these Dunu tips work with the Dusk? The nozzle is slightly bigger than the supported range I believe.

[@edwinbeta2806]

Can you do something going over treble sometime? It seems to be a region which everyone is picky about, and the differences seem on graphs don't feel very obvious and intuitive the way bass to upper midrange is

[@jkaic1]

Hi timmy, how do we EQ more money into our wallet for next years iems :U

[@faisalfirdausiinn4708]

i wonder if there are any IEMs that are suitable to used in working environment(need to hear surrounding sound). .. which means have the least isolation, i guess..

[@iMobinator]

open back iems will have noise bleed through because of the holes, raptgo hook x is really praised and 200-300$

[@biswarupbandyopadhyay3266]

Great explanation of the Eq part... Clear af!! 😅

[@mehmetgurdal]

Eq is the reason why I look for flatter gear. It's way easier to add some bass than cleaning up a messy bloated one.

[@Gizaudio]

Try 7th Acoustic Proxima. It's on my squig site

[@mehmetgurdal]

@@Gizaudio it measures like a sennheiser hd560s. Why this model is not reviewed? It's a competitor to etymotic er2se. They can be used as reference for many things. I'm not even mentioning about its usage as monitoring. If it's a solid resin body it would seal perfectly. I'm saying if because I can't even find a picture of it. Are these guys focused on local markets?

[@CashPope]

while it's easy to just add a low shelf filter, i'd rather cut bass than add distortion. it's easy to cut bass with graph tool anyway

[@shiro214okane]

wow soo many good uploads this December keep it up, I've learned how to EQ now. any thoughts for Hiby MSEB?

[@janulik9535]

Hello,...does digital equalizers such as eq apo harm the quality of source signal?, I do use it for bookshelf stereo setup primarly but at the moment I do not have good acustics, so cant evaluate if it harm somhow to soudstage, clarity etc, actually I need it because I found my new dac trable expanded and I need to reduce it all the way from 2000 HZ - 3000Hz about 1.5 db and fter that about 1 db, so would it e preferable to change the dac until I can or eq is 99% ok?

[@GuavaJuiceBane]

Thanks for going over auto EQ Timmy. You rock🤘.

[@Stew666able]

Hey Tim I've moded an iem with great success in the past, how about a video on moding.

[@nipunsnrtrahman114]

Can you please add tanchjim ola (non bass) to the list in the eq website?

[@ChillMusic15-z5m]

Thanks a lot bro for this phenomenal video 🤩💯💯👍🏻👍🏻👍🏻👍🏻

[@thepicturesband]

for out and about is there an iPhone app that EQs and if the only answer is the built in EQ, then is there a graph out there for each of those eq descriptions (rock, vocal etc)? I have u12t and and am wondering about adding back the 3k dip.

[@overprice7802]

I already tried this with my headphones and iems.. I equalized my blon bl 03 to sound like senn ie900.. I liked it

[@Sweetaccord]

I've always used rub your fingers by your ears. If you can hear them you don't have a good seal. If you don't you have a good seal. Easy.

[@mayurbadiyani]

Wow really does it work with cheap iems like tangzu wan'er

[@juanpaulocudia3489]

been using this wavelet app since 20221 and been very useful for my other crafty iems 😅. now i can create more sound profile. thanks Timmy 😇

[@cadmiumpureland]

Can wavelet plays my own music files in my mobile phone using the newly created sound signature, other than spotify?

[@Gizaudio]

I've seen mixed experience on this one. You can try it out. Wavelet is free

[@ekjellgren]

How do I get the profiles if I use windows and not a phone?

[@chrisstroud60]

I can't seem to do this on the mobile squig site. I guess it has to be done on PC then downloaded from the computer to the phone?

[@Gizaudio]

Yes

[@chrisstroud60]

@@Gizaudio lol I figured it out

[@shiro214okane]

using edge at mobile then desktop mode lelz

[@那人冷靜一點]

I eqed my monarch mk2 to ultimate ears live but it didn't sound anything like the ue live i heard days ago, dunno what's going on

[@Gizaudio]

EQ is never truly accurate, especially with treble. So you won't get the same response as trying the real thing. Also, many other factors come into play on how effective EQ is on certain IEMs. Like I mention in the video, EQ is meant to remedy small issues in your IEMs and allow you to sample what other IEMs might sound like.

[@cedricamonn8335]

Can you please try the dokoni tips and give you opinion on them 🥺🙏

[@exs6708]

Redmi buds 3 pro also accepts eq really well. It's just the TangZu waner in tws form.

[@MyMomSayNoDota]

i'm surprised how closed 20-6000 hz between wan'er s.g and em6l. and this eq made cancelled my desire for hexa. my wan'er s.g soooo much fun to hear. thanks for this knowledge.

[@DwayneNielsen]

I think you should do a list of of affordable to about 600.00 of the best headphones that respond to eq the best.

[@mehmetgurdal]

May I add TKZK wave as well? It's bass response is linear and could serve well to those who want a hybrid in this price range

[@JohnyMcNeal]

It's not about having money to spend on 2k iem, it's about if it's a smart decision or not. In vast majority of cases it is not considering the amount of money amd gain on sound quality, life of those iem and their value etc etc.

[@nathz2020]

Thank you for the information 😊 But using eq make lossless audio bit perfect resmpling right?

[@lonewolf5092]

does the eq remain effective as long as we have it open in the background.

[@CashPope]

Can't have bit perfect on android tho... i don't mind windows sound mixer, but the android mixer is a special piece of work

[@darren3509]

How do we use auto eq with equalizer apo on windows pc? Can I import the txt file similar to wavelet app on Android?

[@Gizaudio]

Yes, you can export using the regular "export" button. Not the wavelet one. Or just copy paste the eq values onto equalizer apo

[@sonilee8066]

Does wavelet can still work if it's connect with DAC?

[@culoi5155]

I think we can config treble of planar iems easier than an dd or bà one.

[@karetnyadua9739]

tim, please tell me wich one better for sound stage and analytical between salnotes zero and tangzu wan'er?

[@notarluca]

Please does anyone have an eq settings for wavelt of the Pioneer hdj X5?

[@bindstf2]

Mild correction: 9:13 the truthear hexa is $80

[@retouthugues4921]

Nice vidéo !! Can this be used to watch movies on computer or mobile phone ? Or just for listening music ?

[@v8706]

Hii i want to eq sennhieser momentum 4 and i want to eq it for best sounding setting for everything like gaming watching and watch webseries any idea

[@mjsperafico]

Does TRN BA5 and Tin T2 OG have good response to auto EQ?

[@thomasdanny7717]

I tried auto eq Variations on the SA6U and Monarch MK2, and the sound got weird, muddy and foggy.. 😭🤣