Turning eBay Junk into Profit! | Profit or Loss S1:E56

Huge thankyou to PCBWay to sponsoring today's video - Sign up here ▶ www.pcbway.com/ PCBWay produce reliable PCBs for customers with demanding needs. Get your quote in seconds, PCBs shipped in as fast as 1 day.
This one is a long one...
Beginner Soldering Setup [Affiliated] - geni.us/Knct0
My Soldering Setup [Affiliated] - geni.us/wdNJW
My KZbin Setup [Affiliated] - geni.us/CD32Jm
My Microscope [Affiliated] - geni.us/VUitBB
Hot Air Station [Affiliated] - geni.us/sYFRAL
Soldering Iron [Affiliated] - geni.us/USIdsE
Multimeter [Affiliated] - geni.us/VQcnlQ
Solder [Affiliated] - geni.us/B8Sdld
Board Holder [Affiliated] - geni.us/qE3oF
Screwdriver Set [Affiliated] - geni.us/fohS
Recording Cameras [Affiliated] - geni.us/002sg
USB C Electronic Reader [Affiliated] - s.click.aliexp...
Xbox Removal Tool [Affiliated] - s.click.aliexp...
Amaoe Chip Holder [Affiliated] - s.click.aliexp...
PS5 Stencils [Affiliated] - s.click.aliexp...
Tweezers [Affiliated] - s.click.aliexp...
Xbox HDMI Ports [Affiliated] - s.click.aliexp...
TDP158 Xbox Retimer IC [Affiliated] - s.click.aliexp...
Nintendo Switch IC's [Affiliated] - s.click.aliexp...
Nintendo Switch Ports [Affiliated] - s.click.aliexp...
📞 Discord - / discord
📺 Twitch - / joeydoestechofficial
📷 Instagram - / joeydoestech
🙋‍♂️ Twitter - / joeydoestech
📧 Business Inquiries - [e-mail]
My eBay Online Store ▶ www.ebay.co.uk...
Link Generator [Affiliated] - geni.us/ex1mu
📓 Disclaimers:
All videos uploaded onto my channel are strictly for entertainment purposes only. If you want to follow along one of my guides or how to's, please bare in mind that anything damage caused to your belongings during or after the video is your responsibility. Please think carefully and ensure you are fully competent before attempting to carry out any instructions on my videos. Most importantly, enjoy watching 😁
Joey Does Tech is a participant in the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission incomes by advertising and linking to Joey Does Tech.

[@JoeyDoesTech]

Thanks for watching! If you do enjoy the content, please consider subscribing to take part in the journey to 100,000 subscribers! ❤😊

[@ideasupply5282]

that ENxx Chip is a 3v regulator

[@ideasupply5282]

also 0.02 amps

[@Saivishal-bs6rt]

why aren't you using thermal camara

[@JoeyDoesTech]

I did use a thermal camera 😊😊Apologies I should have put that in the video! @@Saivishal-bs6rt

[@colinboneham7387]

An old friend of mine that did aircraft system fault finding said he used to stick a larger fuse in till the item that was faulty blew so he could get that changed, he said it saved him 1000’s of hours of fault finding

[@Dmiliunas]

That's genius in a odd way.

[@KyleCalzavara]

0.02 Amps, you'll be seeing this in your sleep i think lol

[@JoeyDoesTech]

I am! >.

[@joshkelly4682]

Seeing this board repair gives me the itch to repair something

[@JoeyDoesTech]

DO IT! :)

[@joshkelly4682]

@@JoeyDoesTech in the process of repairing and modding 2 original xbox consoles that have bad dvd drives which are expensive to replace

[@highroyds]

Next you just need a sonic brush for cleaning ;) - Itch !! 0.02 amps.... honestly I would have the amp meter plugged in and then using the multimeter see where the 0.02amp is going to, that might show you where the issue might be ?

[@CaptSpeirsB744]

I know your frustration. I worked for Mercedes (retired now) and had a V12 Bi-Turbo that would would lose half the motor when run at 130 mph plus for extended period of time intermittently. It literally took a month and 5 scopes connected to the engine to locate the problem was on the right side (the V12 is basically two motors sharing one crankshaft) and an additional week of running the engine in the lot with radiator blocked to get the car hot enough to duplicate the problem. Turns out it was a bad solder connection for all the coils ground on the right side motor. Adding to the frustration was the wiring diagram from the factory did not match the vehicle in locating the "Z" splice for that ground. Replaced entire engine harness, problem solved.

[@wiznova7053]

i was gonna say why are you going 130+ anyways but if I had a V12 I probably would too😂

[@CaptSpeirsB744]

We were only able to drive it that fast a few times. Client paid for the track time. The other times wwe ran it on the dyno. The car was capable of doing close to 200 mph (ECM Chip Mod). This client took the car to Montana quite often to see what it could do at a time when there was no speed limit in certain areas of Montana.

[@easyway5482]

all i have learned is a peep on one side = good and peep both sides = bad LOL

[@ajaks7636]

Joey Does 0.02 Amps!! If you don't drink alcohol, maybe it's time to start. Beware of gremlins. Great Attempted Repair, and Video! Thank You. 😀

[@klorslug]

0.02 amps, Joey’s favourite reading 😅

[@dogastus]

Isn't there some way of tracing what's going on with a 'scope rather than just changing chips and hoping?

[@ronny332]

:18:18 your correction with 460mah is still wrong, because, like we had sometimes ago in the live chat, the reading is mA not mAh 🙂 mA is the current power, mAh is the power over time (hour).

[@TheCod3r]

0.02 amps ;) don't forget lol

[@mohbounu]

😂

[@chrisstyles4630]

Time to scratch my itch for more joey dose tech

[@BigBaddaBoom]

You really have a 0.02 amps of itch for fixing stuff, according to a friend of mine. lol

[@MrStax89]

Zero point zero two Amps! It was a valiant effort, too bad you could get that one working

[@AJMandourah]

it seems like there is a bridge on the usb port in 13:42 worth checking though.

[@Johadart]

Better luck next time mate. 0.02amps Joe from Australia 🤙🏼🇦🇺

[@Somnifuge]

Turned that in to a real Switch of Theseus, huh

[@JaeNikkiJackson-ow4ux]

Solid work Joey.

[@KisoX]

zero point zero two amps was my nickname in high school

[@joelste]

itch (from the stream)

[@melissamarshall8458]

“Welcome to S1 Episode 4,534 of profit or loss” 😂 Maybe you should have aimed for £500 plus or minus just for season two’s sake! 🙈

[@peteb5343]

0.02 amps… one day … that is all the display will ever say 😂😂😂😂😂

[@stephengrieve8nt]

You can't win them all, enjoyed the video, really thought that by the end you would crack it 😞 0.02 amps

[@iYatess]

0.02A, if at first you don’r succeed, throw it at the wall 😂

[@DracoMcGuyver]

Naught point naught two amps. Great video.

[@Drinkk]

I was itch-ing to see the sw-itch from the tw-itch livestream fixed, but it stays at 0.02 amps Great content as always Joey 🎉

[@Danners_]

0.02A Love the content you make!

[@StreamerInfo]

0.02 amps will be on your gravestone I think lol :p

[@fox-vengoss5849]

0.02 Amps obviously :D

[@darkracer1252]

i absolutely HATE water damage indicators. seeing as they will trigger FROM SIMPLY MOIST AIR. you litterally cannot own any apple product if you live in the netherlands and actually want them to fix your stuff. because they WILL refuse to replace your hdmi port if the indicators are pink. even if it's every single one of them. and even if it's only a single one on the opposite end of the board. they put them on there just so they can deny people their warrenty.

[@JackCh91]

0.02 AMPS!

[@erickergon4825]

0.02 AMPS... I usually never comment, but I just couldn't help myself this time

[@brianp4425]

itch!

[@alexualexul]

On Min 13:40, do i see pin 6 and 7 bridging there?

[@alexualexul]

They lead to 2 different test points

[@alexualexul]

D+ and D- pins

[@Bytedecode72]

just itch (ing) for content

[@danielhulan3058]

0.02 amps! O7 lol

[@ahenson05]

0.02 nice try Joey

[@TheFatHampster]

0.02 amps!

[@relax4055]

İ believe charging port is shorted

[@PrototypeOnyx]

0.02 A 👀

[@ZachPeacock]

I don’t have 0.02 amps to spare but i do have my 2 cents

[@0rDinaryRob]

0.02A

[@leefreeman-roach3526]

0.02amps 😊

[@balin1600]

0.02 amps llap

[@MrTurtlebar]

0.02a 😊

[@darkd3vil6620]

0.02 amps loooool

[@phynx-victumterra652]

Itch

[@TheChingyLeeShow]

0.02 amps

[@Saif_Bleem]

Itch ❤

[@JamieLee2k]

0.02amps

[@tonydunne4403]

0.02 amps it would be better if it was 0.00

[@davidahman5342]

0.02 amp

[@rhyssek85]

Itch itch itch &and 0.02 amps

[@lukeskytrekker]

Itch itch itch

[@boyofcreation4895]

It really amazes me how many Sw(itch)es get broken but hey, it gives us wonderful content like this!

[@linksaya]

Joey I've been having the same issue for over a month on the SAME console (even same colour), and turned out to be a faulty cap on the nand area. The one on the far right, where, if you were to install a picofly chip, you'd place SP2. Try that out!

[@Parastorm.]

0.02A

[@jelanithomas71]

0.02 amps

[@krystofer40]

0.02amps

[@ConsoleTherapy]

Thanks very much for the shout out Joey, really appreciate it. Multimeter is looking great, and those Hakko PCB holders are great, I must invest in one. Thanks for everything you do for the console repair scene, love your videos ❤

[@JoeyDoesTech]

You're more than welcome! Thanks again for the advice, appreciate it :)

[@thadofalltrades]

0.02 needs to be a t shirt

[@Meaus1]

yes great idea lol 😂 😂

[@infinitepower6780]

Are you pulling the replacement chips from donor boards? Because isn't there a possibility that one of two of those chips are bad from the donor side?

[@JoeyDoesTech]

Oh 100% correct.

[@colinboneham7387]

That 0.02amps is a nightmare that someone needs to crack somehow, imo I think it’s an internal short in the cpu/gpu that just doesn’t show up as it’s so small

[@DIYRepairHour]

I stab myself with tweezers on regular. Considering going professional in this sport.

[@peters2620]

I genuinely don't know how you managed to stay calm doing this.

[@TomHorler]

Hi Joey, if you want to get the name/writing off the back of the case use lighter fluid (which is basically the same as a product naphtha) on a cotton swab, no joke! 👍🏼

[@therubydoobyshow4311]

0.02 amps..... then turn off 😂

[@Meaus1]

0.02amp better luck next time mate.

[@G.h.i.x]

itch!

[@SaveOurStuff]

itch

[@SignifyChaos]

ITCH!

[@lorenzokirkland8040]

I was itch-ing for a new video

[@oortcloud210]

ZERO POINT ZERO TWO AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHMPS!

[@johnrmcdonald7393]

love this series Joey btw 0.02A

[@der-andyman]

Hey Joey, can I buy this motherboard you couldnt fix in this video??

[@Cyemese]

0.02 amps. A modern day mystery it is.

[@TheSkaldenmettrunk]

The 0.02 Nightmare Switch Lite.. I'm sorry for Sally tough..

[@ironknobair]

Fascinating thing you’re into. I’m gonna give it a go. Bought some tools and a couple of Xbox 360s to play around with. Those ceramic caps are expensive hey.

[@gokusupersaiyan6]

0.02 Amps! Sad to see you struggle with these.

[@ninovalenti96]

1.21 gigawatts… I mean 0.02amps.

[@olimpiupuscas2771]

did you calibrate your hot air station because you are using 450 degrees Celsius, that's a lot of heat on that small bga chip,

[@archerbob6847]

I think the problem is he need to remove a cap or two along the given rails and when the aberrant draw is eliminated he can slowly track down where the problem is, instead of just removing IC's willy-nilly

[@adriannp.]

The 0.02 Nightmare 😅

[@geordimaul5380]

With sally’s spectacular spreadsheet. Why don’t you link the pages. Then it will automatically update the main page as you put in the weekly costs and sales

[@jeffcissell4841]

I'm curious what solder you use and what temperature you set your iron to

[@arch1107]

you could sell shirts with the 0.02 number and would sell btw, you are really doing some great solder jobs, a shame this one didnt worked

[@MarkColemanRules]

0.02 AMPS! Seriously, nice work.

[@christywear5272]

0.02 amps 1.21 gigawatts! err well 0.296 watts but still ;p

[@alicanduran9217]

Digital multimeter is a great news.. hope this comment helps for yt algorithm.

[@codenamev5659]

0.02 amps, don't worry Joey , I have a feeling the next couple will be winners :)

[@SaveOurStuff]

Joey, 0.02A is not 2 mA but 20 mA...

[@josephnealescratchcards]

0.02 amps and see you soon

[@matthewmaidment8464]

Ooooh I need a new multi meter and I like your new one 👌🏼

[@BADGT4]

0.02A bummer u didnt get it going but was fun watching u try

[@whollymindless]

0.02 amps... worse than a 12v shock.

[@thedrickklaus2428]

Late to video, it I wanted to remind you… 0.02 amps

[@mirayanomi]

0.47 mA straight to APU reball😅

[@oh2ftu]

didn't read all the comments, but I think I saw a short on the USB-C connector?

[@TubeRadioRepairRestoration]

Joey love your videos. Can you or some explain to me why you would clean flux off to then just add more?