FULL REBUILD: From Grave To Glory | Reviving Buried 1965 Ford F100 | Turnin Rust

Join in with the Turnin Rust crew for this Start To Finish special! After discovering an abandoned 1965 Ford F100 buried beneath years of dirt and debris, the guys set forth to literally dig this thing out of its grave. Having high hopes of seeing it on the road again, the team finds the home of the biggest rats nest they've ever seen in their life. Determined to press forward, they fight through rusty bolts, chewed up wires, and a highly neglected engine in hopes to see this dead classic brought back to life. Follow along as they transform this once forgotten treasure back into its former glory.
This video is a compilation of a 3 part series we did on our Restored channel. We've pieced together the content to show a full start to finish rebuild. We hope you enjoy the video!
Shout Out To ‪@Maxxdtrailersofficial‬ for Sponsoring Us With Our Drop N Load Trailer!
Check them out here: maxxdtrailers....
► Subscribe HERE: www.youtube.co...
►Subscribe to Our RESTORED Channel As Well: / restored-hope
►NEW MERCH AVAILABLE: www.be-restore...
►Become a Turnin Rust Member: / @turninrust
►►Any business enquires can be sent to: [e-mail]
** Like To Send Us Mail?
Lance & Wyatt Bush
P.O Box 865, Bogata Tx, 75417
#rescue #transformation #abandoned

[@TurninRust]

Be sure to check out our Newest video release here: kzbin.info/www/bejne/nmirpJ-sm5urhqsfeature=shared

[@thekingsilverado3266]

Just another stick some gas in the carb & drive it home!!!!!

[@smokinsensei580]

I worry about your lungs . Respirators guys . Protect your lungs

[@davidcagle9775]

And 5 3lb rats run under yur house! LOL

[@thekingsilverado3266]

@@davidcagle9775 You're mistaking dude. Those Rats run the white house meaning in it under it and over it most of em wear a Yamika too...

[@thembisasandramalike7565]

Is possible to also possible to also give the list of your music. I love the music you always play on these programmes.

[@aaronlambeth6605]

With all the youtubers restoring it's great to see a couple guys that just work on the vehicle without drama and cussing every other sentence. Good job guys

[@BraidenMcKinney]

Most mechanics cuss they just don't I cuss because when the bolts break and my knuckles get slammed

[@CarRestoration-k9e]

I see that he is very serious about his work.

[@tonymolineiro554]

Sorry I got to pass on this one. But good luck guys ✌️👋

[@TheKeymaster316]

Man, ya'll are rock stars. I usually don't enjoy 2+ hour videos but I really enjoyed this save. It's amazing that, no matter how lost something or someone seems to be, they can always be saved. Great job, fellas.

[@liquidlogic7]

I so enjoy watching you guys! It is so wonderful to see a father and son working together bringing the old classics back to life. And the fact you love the lord is just fabulous!! Praise god for people like you that love the lord and share your world with us. I have an old 1967 Cougar XR-7 I’d just love for you guys to tinker with. It runs pretty good but does need some TLC my old body won’t let me do anymore. Keep up the good work! Love your channel fellas! 🙏

[@mnanninga4247]

Great job. Please show a part 2 of the finished product. It’s really nice that you have gotten back to doing what you do and not just bringing in projects. I know it’s expensive but keep up the good work.

[@Exor_o7]

Yes, please show part 2!

[@Johnshaft1970]

This's How God Rebuilds Those That Come To Him Humble, From The Bottom Up. Listen To That Old " Y " Block !!!!!!!!!!

[@california123able]

That's not a "Y" block. That's an FE series engine. That's a 352....A "Y" block has two bolts at each end of the valve cover to hold it on.. The puch rods run through the intake on a FE engine. FYI

[@Johnshaft1970]

@california123able 🎯

[@michelduncan6317]

Amen brotha

[@tonydowd8566]

I'm totally blown away with what y'all have been able to accomplish with this ol Ford. (Love those 352 Y blocks) Your testimony is icing on the cake. Really appreciate the longer video format. God bless y'all, and keep "Turnin Rust"....... ❤❤❤

[@waynerohde1036]

My dad had an old Fairlane with the 312 y block. It was kinda snappy

[@BAP219]

Love the comment, except for the "Y" block... It's actually an FE Block. Same family as the 390/427/428.

[@DHarri9977]

This is exactly why people watch you guys, another awesome vid, thanks for letting us follow along.

[@billlangdon5914]

Hey Lance. I live in the salt belt, Ohio. We run into locked wheels and brakes all the time after something has set awhile. We take a sledge hammer and give the rims a good wack while pulling on it with the winch. You might not break them all loose but if you get a couple it sure makes pulling easier. Nice work from you all.

[@cliffclark8682]

I honestly think that if you could look up the phrase “perfect parental Christian relationship” in the dictionary there would be photos of the three of you. Thank you for your witness and all that you do.

[@stancalame2771]

Guys, I just found your channel and this is the second one I've seen. Loved the Dirty Bird. This brings back memories of my dad and I pulling a '50 model ford out of a pasture full of junk. I paid $50 for it when I was 16. My dad labored on that truck mechanically and I did what I could to help. We did it under a car port with very little tools. Painted it inside and out with a borrowed sprayer. Put in a cheap stereo and and some Jensen 6X9s. I couldn't seen to keep it running so my dad swapped me his 70 El Camino. He drove it til it finally died. Great memories. Good messages from God and great music. I got place on Cypress Springs, maybe I'll run into you in East Texas!

[@fester73666]

Absolutely AWESOME video Lance, Wyatt and Christian, that was a lot of very hard work y'all put into that old truck and it's lookin really good now, all the best with gettin it finished and lettin us see the finished result, god bless 👍👍👍

[@anthracitecoal8673]

I have viewed more truck resurrections than I can count on KZbin. This one is, by far, the most amazing resurrection project I've ever seen. I always appreciate the work that you guys put into the projects that are shared with everyone...

[@gregoryblair9810]

Watching how hard your projects usually go makes me feel better when I have to wrench on my cars! When I reworked my bumpside f100 302 the distributor was froxen in. Had to break it out so also replaced with HEI. Ran good. Love your song at the end...perfect! God is good.

[@mamawb7915]

Loved seeing Christian get in on the rebuild. You go, girl! Great job! ❤

[@freidacoleman8719]

My husband and I love watching your videos! Amazing talent, y’all are so blessed to be able to take something that looks like it should be scrapped and bring it back to life !!

[@JACKS-w4o]

I'm a huge ford guy. I'm so glad they made this video on the 1965 Ford F-100.

[@robertlacob8831]

Guys, I can't believe you finally got that engine running after seeing the crud and rust taken out!!! You could say that engine had a semi-rebuild and that the frame and bed were replaced, wow. By the time this truck is done, it will be a different truck with a new identity! Long live the wood hauling "65 F100!!! Can't wait for Part 2!!! Awesome.

[@timmurray7798]

Most enjoyable show on youtube! Especially to watch with the kids. Thanks for another great video to the both of you. God bless you both.

[@XXsupervisor]

You brought that ol boy back from the dead. Respect

[@DD-mp9ok]

That subscription to Street Muscle Magazine really paid off with this channel introduction! I am in complete amazement - & complete joy for you saving that old truck! I had one 30+ years ago & have missed it ever since I sold it. I had restored it a lot mechanically, but circumstances wouldn't let me finish. My only solace came from seeing my former "Old Girl" pass by, heading to a show on her rollback. I was like a proud mama on graduation day. Edit: "How does it get that bad?" I can answer that... animal urine. It is corrosive.

[@flynnjones2008]

Pine needles are very acidic!

[@vernonabernethy3970]

It’s a beauty already! I always thought you were going to get that truck running. You really know what you’re doing. Congratulations!

[@dickdomain719]

LOL they don't have a clue what they're doing, I have never seen an engine so badly hacked by anyone in my entire life.

[@donl4953]

Absolutely loved this episode!!! Great job father and son. And can’t absolutely can not forget daughter!! Great job little sis.

[@rogerborgeson8468]

My father has gotten to old and sick to do this fun stuff. I love watching you guys. Much love from PHX.

[@brucecowgill7672]

What a revival! Many times during the video I thought you were going to give up on that engine and I wouldn't have blamed you. Thanks for sticking it out!

[@paulym5814]

Great job on this one. Just shows you can never give in and stop fighting for what you want. Great editing Christian. Great camera work.

[@1978JonBullock]

Turin Rust and Restored we are blessed to have so much great content from a great family duo. Stay blessed.

[@tectalabyss]

Great job ! All of you. Though I am not a fan of lowering an auto body. I believe in " to each their own "Whatever you al do I am sure it will come out Great. Thank all of you for saving these great old cars and trucks. May God bless you and yours.

[@ThanhTúPhan-h3i]

The restoration process is so impressive, every little detail is meticulously cared for. Can't wait to see the final result!

[@stomper2582]

Good job, guys. A lot of people wouldn’t have bothered with that truck. Glad you saved it, and with the engine that was in it when you got it. 👍🇺🇸🦅

[@flee.The.Cities]

Wow!! Listen to these guys breathing, digging out that beautiful rust bucket, I loved it, those graveyard digging days. I'm watching this on Resurrection weekend and this is so symbolic. After the hard work and restoration then the glorification 🙏🏽❤

[@rickm5806]

Absolutely the best revival of a truck I've ever seen! Great job!

[@mattmav510]

I’m speechless .. great restoration .. y’all went all out on this one for sure 👍

[@Dovey84]

It’s great you dig them out of places, most people wouldn’t even look to bother? That’s why I like your videos you go the extra mile to save them 👍

[@MLFranklin]

We had a '66. I'm having great flashbacks when I see parts that I've not seen in 45-50 years. Thanks so much for making this video.

[@davidnewton3882]

I didn’t think that engine would ever run again

[@bluecollarparadisetonywarf1789]

You guys are awesome just wanted to say thank you and also let you know how refreshing to see Christian brothers and father son team oh yea letting little sister get in on the action as well, keep posting your videos and I’ll keep watching thanks brother!!! Was born in 1965 and live here in Oklahoma so ifn you are ever interested in selling this truck I’m might be your guy

[@marcbarnum9038]

Old Fords seldom die is why it runs so good. Great job and video you three!

[@jeepsblackpowderandlights4305]

it runss good because it was completetly rebuilt dope

[@alexisrivera7650]

Not ashamed. Love the music too. I’ve mentioned it before and say again. You guys inspire me to keep plugging away on my 53 Chevy.

[@muggshot24]

I couldn't figure it out, but something was unsettling about the bed and rear quarter panels, and how they looked "off " ; it just looked wrong, but then you explained that it was GM rear panels. Very nice truck. I love the character of old vehicles and the gems like this one with red dash/interior. I hope the bench seat gets attention and it gets replaced or reupholstered in red too. And what a strong engine even still with the worn cam shaft !?!?. Thank you for saving another classic American icon from the grave. I really like the '55s F-100 body style and especially the front grills of the era, but these '60 models are growing on me too. Thanks for doing what you guys do. It makes me want to get into my own salvage project.

[@AaronBrevik]

Great to HEAR from you all again.

[@gerhelwinters1967]

I wish I could still do that much work on trucks & cars like that, but since I broke my leg, then I broke my neck and lost my son to cancer, not to mention I'm getting old 65. I've gotten a little slow. I still have my 68 C10 to tinker on. I't good I can watch you guys. Thanks, you guys are great!

[@wadebonhomme2142]

Fellas that was an awesome episode, your filming, music and content is exceptional, I enjoyed watching every moment, the truck transformation is almost unbelievable, can’t wait to see what is next on this old truck!

[@haydenadventures1610]

I am thankful that people post vids like this I find it relaxing watching trucks and bikes built

[@danielviau9234]

Great job Lance and family and God bless you and your family

[@JamesBraun-o5t]

I really enjoy it when you guys resurrect something that looks like there is nothing to save. Outstanding.

[@jamesmallinger9555]

Hey Kraven family,I hope you guys are well and I Love ❤️ seeing y'all back at it,I Love when you are,taking a pile of vehicles and saving them from the crusher ,LoveJim J&R mobile service and God Bless y'all and I hope you guys had a great Thanksgiving weekend

[@chadburud5681]

Your dad has one of the strongest don't give up attitude I've ever witnessed.. good job!

[@maggieg1652]

Praise the Lord Jesus Christ

[@Lionswingaming]

Amen

[@YaBoyDrifts1]

Amen

[@mwatkins2464]

Amen 🙏

[@Jesusiscomingsoon613]

Amen!

[@uwaissayed-qo5xu]

Jesus is not God...He is a prophet of God

[@christivie121]

Gentlemen, it was a pleasure to see you pour in your passion into that project. Thanks again for another great episode! God bless 🙏

[@friguy4444]

All things good are because of the Lord God!

[@ccg1171]

🙄 👹👺

[@ghettosled1976]

It wasn’t God that freed up my frozen brakes.

[@ryanehlis426]

Amen brother, God is good!

[@ccg1171]

@@ryanehlis426 👹👺

[@Snotric]

😂

[@gregdavis2364]

Best one yet! that motor was dead and you brought it back. Still can't believe it. Nice job!

[@michaelb.42112]

You guys got that classic beauty looking KILLER ! I love the patina, of course, and the rims give it an extra oomph.

[@greggsvintageworkshop8974]

GREAT JOB, Amazing getting it this far! Brings back memories of one I had the same color and was a 1964. It had a straight six and a 3 in the tree as well. Drove that a when I was sixteen to nineteen. I'm 65 now, so what a treat to watch this! Thank you!

[@loydheckenlively9426]

You resurrected that thing from the dead view. And your father should be very proud of yourselves. For what you have done, most people wouldn't just took it to the scrap yard. But you guys revived it, it sounded great. Congratulations, I'm a just prescribing to you. To channel God bless you both keep up the good work.

[@Powerstroke98]

I would have thought he would have used a snatch-block right from the start, with all wheels locked up, that's quite a pull! Great job on the work you put in on that engine, and the brakes guys, makes it all worthwhile watching to the end, to see the outcome! Great camera work as well, and kudos to the editing work!

[@robertwest3093]

I’m impressed! There’s guys who start off with complete cars as a project and don’t get past the disassembly stage. Then they sell it and it changes hands several more times never to be reassembled and become a complete car again. You started off with barebones and basically ended up with a truck right off the showroom floor!

[@thomaswermager1819]

The F100 has really come together with the short bed! I just can’t get over the time and effort that went into getting that engine running! She’s gonna be a sweetheart when you folks are done! Looking forward to the finished product! Great video and content!

[@MikeBeam-mi8jo]

Beautiful... talk about a Near Death Experience, you guys just wouldn't give up! my first vehicle was a 65 Ford pickup and it was super hard to steer just like this one. Wish I still had it... love your channel - to God be the Glory!

[@sfranklin9073]

I owned a 66 just like it and loved that old truck. I drove the wheels off of it. Thank you for the video.

[@davidmccaffery7977]

Love the old fashioned American enginuity and I love preserving old US automobiles. What a great team..cool truck!. God Bless America

[@TomSnyder-gx5ru]

Absolutely amazing, you guys have to be the only two guys in the world that would take this project on!

[@kande6916]

You guys went above and beyond to save that old ford motor!! On behalf of us die hard Ford guys, Thanks!!!

[@bluecollarparadisetonywarf1789]

You guys are awesome just wanted to say thank you and also let you know how refreshing to see Christian brothers and father son team oh yea letting little sister get in on the action as well, keep posting your videos and I’ll keep watching thanks brother!!!

[@matthewlangowski6398]

What a win! Awesome transformation in such a short time.

[@8056443232]

I saw this months ago, and watched it again today. I honestly can't even begin to imagine HOW that thing could have been running when parked. It looks very much like it was underwater for a long time: specifically, SALT water. Wow. Great efforts guys, great video, God bless.

[@sfcbrick]

First time watching you guys. Very nice to hear credit given to God! You guys rock. ❤

[@scrappyjohnson8138]

If I hadn’t seen it with my own eyes I wouldn’t believed you could get this to run again. You guys are un believable.

[@tomboese367]

God bless you, brothers!!!! I'm soooo proud of your skill and passion for these restorations, but I'm even more proud of the testimonies and credit to God you attribute to it! You really do bless me! Thank you!!!

[@marv.mon.9845]

This truck is coming out great! Can't wait till it's completed. I will stay tuned in for sure! God bless!

[@davidnewton3882]

That motor is toast. You guys are unbelievably patient.

[@terrytye6497]

Can’t wait to see the finished product. I Love that old Ford and thank you for saving it. Someone is going to get a great truck.

[@billmessaros6112]

Great job on this 352. Never seen an engine that rusted and you saved it.

[@pete_rowena]

Hi guys. I'm from Australia and I recall many v years back we found an old prefect buried at old Madura Pass. After dug it out, my father. Made. a tank filled with vinegar. And now it sure was amazing after a day or two we lifted it outlander every nut and bolt moved and only snapped one at the back to remove what was left of a flywheel

[@teemukwamba2749]

Quite inspirational I would have walked away from this project. But I guess these guys are the definition of perseverance.

[@marvinrandolph3731]

I just love this channel a God fearing Family That works together to get the Job done May God keep. Blessin your whole family Amen OH AND BY THE WAY THE 65 F100 IS LOOKING AMAZING YOU GUYS KNOCKED IT OUT THE PARK

[@missionpassed4584]

She shall be named Stumpy and she's a survivor thanks to your amazing skills!

[@wlee4579]

When you pulled the hood off I was thinking this should be interesting. Then when I saw how stuck everything was I thought you sure love a challenge. Awesome!

[@brianstroud6306]

Literally the definition of PERSEVERANCE !!! I really luved watching ! Keep up the great work! GOD BLESS

[@floodway2955]

It's a bit later in the video and I'm sure my heart cried when I saw sister Christian taking part in the video. Great to have her back. Nice

[@joshuataylor4256]

The music choices are perfect for this truck!! Love the fact yall left the pine needles on the front bumper as long as you could This truck will be pretty sweet God Bless !

[@ericcranston8158]

Alot of hard work paid off...unless you've done a rebuild, folks don't realize the time and money that go into it. Nice job...

[@cainsriverhideaway]

I know the old motor took a lot of time and energy but man i love watching it being torn down and built back up.... for me its so rewarding to see it work again ... Hats off to yo and your dad... keep up the awesome work and awesome content on the channel

[@timmy65381]

Wow 🤩 I can not believe you brought that motor back to life!!! Wow 😮 I would have given up, but your patience is admirable! Great job boys!!!

[@1D3adbug]

pretty cool to see some fellow northeast texas boys getting at it. my new favorite channel!!

[@CircleM20]

Love seeing o;d Fords brought back to life with a Ford engine as well. Greetings from a fellow Texan.

[@zumasuma5489]

Guys! What a fantastic film and a hell lot of work. Like your editing and the length of the video for sure. All the best and thank you thank you thank you ! Greetings from Cologne (Germany)

[@robertnauss4815]

Hard work and determination wins .Great motivation video for finding old trucks and resurrecting them .... Awesome job

[@67Stang]

Thats was impressive. So glad yall did not give up. Great to see that old girl moving again. So many would have at least sent that motor to the scrap yard.

[@Blue_VibesOnly]

y’all are awesome, So nice to see the passion in people with what their doing and how they approach it, keep up the good work!

[@thebeardedone1225]

Absolutely awesome video. Glad to see Sis getting her hands dirty, working alongside her brother and father. Can't wait to see you work your rust magic on the bed.

[@shartne]

It amazes me that the crank and pistons are still good and you even used the old cam shaft. I have rebuilt one of those trucks front ends its actually easy and simple. the frame you found is really nice. and the tires and rims are great. It is really working out good for this truck.

[@Axeman3536]

god bless you and may your channel prosper, thank you for the awesome informative video

[@geraldrooke4922]

Your Dad is GREAT. I hope you appreciate him.

[@jeremyconway5793]

Saving unloved forgotten pieces of history,art & almost prehistoric rusted metal monsters who await Gods plan & then you guys show up obviously. 🙏great content ❤&prayers 🙏🦘🐪🪃🇭🇲

[@caroled5734]

What a great job. Never thought that could be brought back to life.

[@Luzeon]

I love it! You guys nailed it!

[@speedybuggy1677]

I love to see it run again you two are very great together working father and son keep up the good work

[@gilbertotaleman]

Alli can say is good to see how you make bring to glory i piece of rust to life .great job to all the crew that work in this progect

[@joshuameldru4004]

Just a joy to watch y’all go through the process, can’t wait to see it all the way through. God bless