TUSA Paragon S Mask Quick Look | Safe Diving

[@delisaweyhrich378]

Please show a video on how to apply the antifog film or the freedom film

[@TheFlyer333]

My fav scuba channel...cheers

[@disabledarmyveteran]

I ordered the black and white version.

[@SafeDiving]

Good mask, and black/white goes with everything

[@e.t.7778]

this lens permit the use of tooth paste or burn lens method to avoid fog? thank you

[@leopoldbloom4835]

I usually don’t wear my mask above surface for more than two minutes per dive, so the Paragon is a very elegant solution for a problem I don’t have.

[@Ibrahimmohamed-ck2yr]

Any recommendation between Tusa paragon and scubapro d mask in terms of quality of the material?

[@leemoore8154]

Would you expect the Paragon S to fit the same as the Paragon (in terms of how well the skirt seals on your face)?

[@SafeDiving]

Yeah, the only difference should be the small bridge between the eyes. The sealing surface should be exactly the same.

[@noaweingarten420]

Hi Mark, would you say that the Paragon S provides a greater visual field than the normal Paragon because it doesn't have the nose bridge?

[@AviMus82]

Some of us like to keep our masks on even above the water such as myself, so this mask is very nice for those of us who do like it I keep our masks on above the water. I understand that not everyone does though.

[@ZachShannon]

I’ll have to go try one of these on! I really want the x deep frameless mask because of my big nose, but none of my local shops carry x deep products.

[@SafeDiving]

XDEEP are pretty new and they're expanding their dealerships. Keep asking your LDS though, if they know there's a demand for a brand then they may look into becoming a dealer...

[@franklytart]

Hi Mark. I’ve got the VX1 UV cut mask, but I’ve been wondering how I pre-treat it before diving. How do you pre-treat UV masks? Can you use the same technique as a clear lens? I don’t want to scratch it! Thanks

[@SafeDiving]

No, I'd be very careful with any coated lenses. One of the reasons why the UV VX1 took a while to be released is that they couldn't get the coating to stick properly. Ask Apeks what they recommend, and let us know if you could. I don't want to recommend anything that could damage your mask...

[@franklytart]

So Apeks said “We would just recommend a high quality optical lens cleaner and gently clean with a soft cloth.” Do you reckon that would be enough to stop the fog?

[@SafeDiving]

Most likely, remember that your lenses didn't just roll off the same production belt as most mask lenses so they shouldn't have the same impurities, so they probably don't need such an aggressive treatment like other masks. I'd go easy, try their method and wear the mask around the house for a bit and repeat if it fogs up. But for any treatment test a little bit in a small corner first. And the water facing side of the lens doesn't need any treatment

[@franklytart]

Thanks Mark. I was going to use Sea Gold probably, and just give that a little buff with a cloth then rinse. Or could use Sea Drops...but will test first before applying to the whole lens. It’s such a good looking mask! Looking forward to using it this summer

[@dannyfryer4746]

EmmaH89 hey I’d like to know the results of your tests 😉 I’m in the same situation

[@rildn7]

Many of us use a red filter on our cameras, why not a mask with built in red filters….. to the workshop…