Tusk SubZero ATV Snow Plow Installation

[@jeremeytaylor2433]

To anyone looking to buy I recommend this plow. I bought one back in 2014 and have had no issue with it. Use it all the time in the winter

[@michaelmotorcycle6586]

Just got my plow a few days ago.Quick shipping (as usual). Just finished putting together in living room. Wife loves that!! Very easy to assemble. Tomorrow will mount plate. Took about 35 minutes.Seems like its built well. Keep you posted. Thanks Rocky Mountain!

[@c.stevensracing7029]

Solid plow and probably the best customer service I've dealt with. They answered my call and then even called back the next day to check in. Keep up the good work. Good customer service is still appreciated.

[@rmatvmc]

That's great to hear! We love the feedback, thanks for sharing that with us!

[@rmatvmc]

the complete kit with a 50" blade is only $299.99 and it ships free in the lower 48 states! This price includes the blade, push tubes, and mount.

[@luvdr350]

Wish it was still 299… FJB

[@rmatvmc]

Yes, there is built in flex with the plow assembly to allow the blade to move slightly with the varying terrain. For example when you approach a driveway on the sidewalk it will dip down and so will the plow to follow it. You'll find when you get the plow fully assembled everything will be tight and secured into place so to answer your question yes, that little bit of movement you are seeing is normal.

[@JustGlassin78]

Thanks RMATV. That Tusk plow is super easy to install just threw it on today. Now all I need is some snow.

[@rmatvmc]

asdeere78 Great! We just got ours setup on our new fully enclosed Ranger so now we wait! We are sure that you'll enjoy your new plow system and we want to encourage you to leave a review on our website for your chance to win either a $100 or $500 gift card! Thanks for watching!

[@rmatvmc]

Yes if you buy the "Snow Plow Kit" it will come with the snow plow mount for your machine. The kit includes everything you need to start plowing as long as you have a winch.

[@rmatvmc]

You are referring to the forward and backward angle right? This is set with the 4 way tilt stops and it's up to you which way you want to run it. if you are plowing ice or light snow the steeper attack angle is better. If you have deep snow you want the top of the blade angled back more so a shallower attack angle.... The moderate attack angles are good for all around plowing...

[@rmatvmc]

It's going to vary from machine to machine with how much it's going to weigh down the front end but with as much as the machine is carrying the actual weight of the plow it shouldn't affect it to the point that springs have to be replaced. We haven't heard of anyone having to replace front springs on an atv because the weight of the plow.

[@rmatvmc]

Like any plow this one is going to weigh down your machine a little bit but you won't need HD Springs to run this plow system. Our plow system is very comparable to all the other plow manufacturers with the 50" blade weighing in at about 60lbs and the tube runner weighing about 55lbs and then if you were to get the 60" blade it weighs approximately 70lbs so . . .

[@JOLLLL1]

just putting the pushtube assembly/push pivot together. Installed the front bolt tight, then backed off 3/8 - 1/2 turn; installed the rear bolt tight. Is it normal to have roughly an 1/8" of "wiggle room" between the pushtube assembly and the blade angle bracket at the rear of the assmebly? Seems like the bushing I received might be a bit too wide. Thanks!

[@nickiticki]

i am looking at the 60" blade. I see on your website you can buy the snow plow mount separately but with the kit does the mount come with it? Like i wouldnt need to buy the snow plow kit plus the snow plow mount correct?

[@miguelvelazquez4564]

Is there any full motion(electric) plows out yet? Only seen some home made ones.

[@Puck_and_plow]

Will this fit a 2005 Honda ricon 680.

[@littletoy01]

thanks for your help

[@ianmiller5867]

Will this work with a 2014 Honda forman 500

[@rmatvmc]

Sorry, I'm not sure what you're asking

[@littletoy01]

what should the angle of the blade be .

[@jacobpearson547]

where you get the kit is it easy to put on

[@HeimataSq]

Does Tusk make a mid mount system for a 2014 Polaris RZR 570 LE EPS? I'm only seeing front Mount subzero kits. I have an OEM Polaris Grille Guard that I do not want to remove in order to have plow mount on. thank you.

[@rmatvmc]

Yes we do. In a 60" & 70" blade. Our part# is 1469340004

[@HeimataSq]

Rocky Mountain ATV MC that's the front mount system though isn't it? I have an OEM grille guard that I do not want to have to remove. that's why im looking into a mid mount system.

[@Dimzia92]

Can I install this at my Buyang fa-d300?? Thank you!

[@rmatvmc]

Unfortunately, the mounts for the plow are machine specific and we do not currently have them for your ATV. Sorry about that and thanks for watching!

[@deepndirty8820]

I tried to buy one but did not let me select my atv

[@rmatvmc]

If your ATV wasn't an option, we may not make it for that model. What model do you have?

[@deepndirty8820]

@@rmatvmc 2000 Honda fourtrax 350

[@pinetag14]

I got this system for my Suzuki King Quad in Dec. We just had our first snow (6") and I plowed 5 driveways with it. It did a great job and I would recommend to anyone looking for an atv plow. Here is my vid from over the weekend. kzbin.info/www/bejne/pHXRXpyIosSUo6c

[@rmatvmc]

Nice job. Glad you're liking your new Tusk SubZero Snow Plow. Enjoy. ~Vinny

[@outdoorguy845]

How is he working with that thing hanging from his neck, that would bother me. Seems like it's always in the way.

[@BillStihlPolitics]

Video too dark when putting in the pins underneath

[@jerseyriders9036]

Will this fit on a Honda recon 250