Рет қаралды 171,999
This is a 2-part series on how to easily, quickly & cheaply make your very own PCBs! Part 1 is an introduction, explaination and me preparing the board for etching! Part 2 is the etching, drilling and evaluation.
You will need:
Copper Clad PCBs/Boards
Acetone
Isopropanol
Ferric Chloride
Travel Magazine/Brochure
Mixing Bottle & Syringe
Wire Wool
2 x Food Trays
Tissue Paper
Scissors
Drill & 0.8mm Drill Bit
Laser Printer
For those who wish to support the channel, my Patreon account is here: / antonycartwright