Tutorial: iPod Touch 4th Generation Screen Replacement Repair Glass | GadgetMenders.com

  Рет қаралды 805,023

GadgetMenders

GadgetMenders

Күн бұрын

Пікірлер: 425
@domandhisipod
@domandhisipod 11 жыл бұрын
I have watched this video a million times now, its the best tutorial I've found on the web. I've fixed three iPods now. Guys, IF YOUR WIFI IS NOT WORKING ALL HOPE IS NOT LOST. Get back under the board and make sure your wifi antenna IS PLUGGED IN SECURELY. If you are getting connection only 1 foot away, your antenna probably became disconnected is only barely touching the connector when you put the board back down.
@thefacelessbiz
@thefacelessbiz 11 жыл бұрын
This is the most detailed screen repair video I've seen so far. Thumbs up for showing potential pitfalls! Why would people "Dislike" this? Thanks.
@kyashiicha
@kyashiicha 12 жыл бұрын
This is the best repair video i have seen so far. Very informative and the video quality and directory is great. You can really see what's going on.
@rickseiden1
@rickseiden1 11 жыл бұрын
Thank you. Just used this video to guide me through replacing the screen on my son's iPod.
@StainzToXin
@StainzToXin 11 жыл бұрын
I love these videos :P everything you have taught me has given me enough information to work at my local computer repair shop :P I now get paid 14$ an hour to do this all day and its great :D
@bestofseinfeldclips
@bestofseinfeldclips 10 жыл бұрын
This should be the standard for all video tutorials. Excellent!
@z06dave
@z06dave 9 жыл бұрын
I followed this step by step and it works great, thanks for your detailed tutorial. It's nice to get an informative tutorial with close up and good descriptions without stupid music playing over and bits missing. Thanks again.
@iliraliko1510
@iliraliko1510 10 жыл бұрын
Thanks man really helped. U have the most best instructions for this replacement on KZbin. Keep up the good work
@MrSM413
@MrSM413 9 жыл бұрын
This is the second time I have use this video to help me replace an iPod screen. Thank you for making such a comprehensive video. Both times Successful.
@03cryptic
@03cryptic 12 жыл бұрын
Thankyou for this in depth video, I got mine done in about 3 hours. Thought I might have been screwed when I realized the shattered part of the digitizer was right over where the WiFi antenna was. I had to carefully remove each tiny piece of glass one at a time so as not to tear the WiFi ribbon cable. Also had a hard time getting the new screen in because of the misshapen top left edge that sustained damage from the drop but it actually turned out really well in the end! Thankyou again :)
@allyourgeekfireflytardis4737
@allyourgeekfireflytardis4737 10 жыл бұрын
Thanks. I used this video to change my screen out today. When the screen turned white I thought it was done for... then reviewing the tail end I realized... 1) I had my digitizer cable bent the wrong way. apparently this will make the screen turn white when putting pressure at the top. 2) I had to reset the ipod power. After I did both of those it worked well. :)
@jeannieglazebrook6027
@jeannieglazebrook6027 11 жыл бұрын
This is one of the most informative and well done videos on You Tube! Well done!
@Sch00lDr00ler
@Sch00lDr00ler 9 жыл бұрын
You are the man/woman!!! Best instructional video as I replaced my screen without a problem. Thanks G-Menders
@paulmcmahon99
@paulmcmahon99 11 жыл бұрын
Thanks for the video. It allowed me to get the job done! For me, the hardest part was plugging in the lcd on the front, not the digitizer on the back.
@captainpantaloons
@captainpantaloons 10 жыл бұрын
Great guide, very detailed and nothing left out.
@BlickEnforcer
@BlickEnforcer 11 жыл бұрын
Your the best, the rest set thing worked, your way better then those crappy phone doctors, thanks man.
@coachBCN
@coachBCN 11 жыл бұрын
Great tutorial! Thanks. I did it, it took me two hours and a half, and main problem for me was at the end of the process to adjust the screen and the ipod. The screen flushed on the top (the screen bus was bent the wrong way), and the adhesive was not strong enough. I had to reopen the day after, put the bus well bent, and use the Super Glue gel. It works now well.
@TheAark
@TheAark 12 жыл бұрын
Great video. This was the first time I have done something like this to an iPod and I can say that this video guided me through it perfectly. Good luck! and be careful.
@palmcoast35
@palmcoast35 10 жыл бұрын
Thank you. Just replaced my screen. Only problem was a white screen. Referred to another video that stated to hold the volume & home button at the same time. That worked for me.
@michiganrulez1
@michiganrulez1 11 жыл бұрын
thanks man it works perfect only complaint is the adhesive that i got off ebay it wsnt precut except around the edges
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Stripped screws are tricky to deal with. If you push down hard while twisting it can work. Otherwise, you're left to drill out the stripped screw.
@mikemain1237
@mikemain1237 11 жыл бұрын
Mandy, where did you buy the replacement parts from? You have to beware of cheap replacement parts as this can be a trap. when you hold the power button and home button, do you continue to hold it until it restarts? If not then give that a try, but from what you are saying, it sounds as though the digitiser maybe faulty or you may have kinked a connector ribbon when reinstalling. Let me know how you go
@MichelleR_Art
@MichelleR_Art 11 жыл бұрын
Great video! I replaced my whole screen and was doing the test before I put everything together, but the top half isn't touch sensitive, only the bottom half is working, what could be the problem?
@GuitarTunage
@GuitarTunage 12 жыл бұрын
Couldnt get the IPOD screen to come on, checked again the logic board connection. LOOSE! Wrapped again with copper tape and made sure the logic board was connected IT WAS! Finally! Nothing happened! Tried the reset trick at the end of the video. NOTHING! Connected the IPOD to my AC home charging unit and the IPOD came on! Amazing! thanks GadgetMenders!
@LemonKade
@LemonKade 11 жыл бұрын
do you need the lcd screen if the previous one has no damage? is it possible to just replace the glass only with out the lcd screen? Thanks your video is great!
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Yes, we also have a variety of other colors available. The parts are the same just different colors.
@bengribstad5004
@bengribstad5004 12 жыл бұрын
Thanks for the detail that other videos have left out!
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Check the digitizer cable and be sure it's securely snapped in place. This is the cable that plugs in under the board and is tricky to plug in.
@David20villa
@David20villa 11 жыл бұрын
Thanks! I was having trouble sleeping. But this video really helped with that!
@formaltaco127
@formaltaco127 11 жыл бұрын
Is adding the superglue gel to the adhesive required? Or is it optional?
@jensenskates
@jensenskates 12 жыл бұрын
THANK YOU worked great saved me $80 at times it was difficult but eventually I figured it out thanks for the help.
@CptShock
@CptShock 11 жыл бұрын
@GadgetMenders Hey there, I followed your tutorial thank you for the instructions! One question though; I forgot to place the metal cover for the rear camera back, is this bad? Should I take off the screen again and put it on again? What's the actual use for the bracket anyway? Thanks a lot!
@gadgetmenders
@gadgetmenders 11 жыл бұрын
We recommend applying super glue gel on top of the adhesive to make for a stronger bond. The clamps allow the adhesive to set well.
@1026Productions
@1026Productions 11 жыл бұрын
Thee best instructional video for ipod touch 4th gen!
@Matisbue
@Matisbue 11 жыл бұрын
Great tutorial!! I successfully change my iPod screen! Amazing job guys!
@kingsleydanso4750
@kingsleydanso4750 11 жыл бұрын
duuude am soooo thanksfulll, your freaking awesome i was able to fix it. it means alot to me, i coulda bought another one buh my gf gave it to me on our anniversary so it has sentimental value to it thanks so much am a big follower now
@tecknofuel1
@tecknofuel1 12 жыл бұрын
Thanks for this tutorial followed it and have saved myself a few pounds.... great.
@Bossbmx8
@Bossbmx8 11 жыл бұрын
Hi is it possible to skip lots of steps and just take the screen out take of adhesive and put the screen back in? Will it still work?
@darkshadows1254
@darkshadows1254 11 жыл бұрын
One question do we have to put super glue gel or only if you want to please respond
@Aurachix
@Aurachix 11 жыл бұрын
What about the little copper tape where the digitizer attaches at 11:40? The screen replacement on yours doesn't have one, and mine doesn't either.
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Check the screen cables. Also, reset by holding the power button and home button simultaneously for 7-10 seconds.
@willfixyourpc
@willfixyourpc 10 жыл бұрын
Hi there, so is better to buy the whole thing? I actually got only the digitizer, is that not a good idea to replace only the digitizer?
@tharphoe9
@tharphoe9 11 жыл бұрын
I accidently cut the blue wire tbat is on the left side of the speaker. the question is why I got black screen? what does blue wire do? How can I fix it? Can I leave it alone? would my screen can be fixed? if so how?
@hispana4644
@hispana4644 11 жыл бұрын
How much would a service like this cost? For a 4th generation it ouch that has a shattered glass corner. All features still work, but the cracks are many with a small hole in the corner. There is no dent, though? Please and thank you!!
@gadgetmenders
@gadgetmenders 11 жыл бұрын
This is likely the power/volume cable. This will need to be replaced. It can be tricky and does require soldering but it's very doable. You can also consult with a local repairman if you don't feel comfortable attempting on your own.
@blakehart3237
@blakehart3237 10 жыл бұрын
Thank you so much for the solution to the whit and black screen it worked! :)
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Reset by holding the power button and home button simultaneously for 7-10 seconds. Small amounts of super glue gel on top of the adhesive make for a stronger hold.
@OnlyRosh14
@OnlyRosh14 11 жыл бұрын
do you have to put the golden copper tape back on the lcd screen ?
@ForeverSkating789
@ForeverSkating789 12 жыл бұрын
Is the metal bracket that goes up by the digitizer cable necessary? Mine is missing. Please reply
@gadgetmenders
@gadgetmenders 11 жыл бұрын
The wires are soldered under the board, however, you have access to the solder points above the board and that's all you need to do.
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Check the digitizer cable and ensure it is securely snapped into place. This is the cable that plugs in under the board.
@freezoneproject567
@freezoneproject567 9 жыл бұрын
Great video. I'm looking to do this repair for a friend, but I'm seeing model A1357 on the back of a white model. Since I don't own one of these, I checked and that model number seems to be associated with the charger, not the device which everyone lists as A1367. Can I assume I'm looking at an iPod Touch 4?
@gadgetmenders
@gadgetmenders 9 жыл бұрын
Christopher Boose I would assume that its a 4th gen. If you could find out when they bought it you could compare it to the 4th gens release date.
@sewosugar
@sewosugar 10 жыл бұрын
Well took my brother and i 3 hours to do this lol. But then guess what! The ipod wouldn't power on. We found an explanation to rectify that though. (ground the battery terminal). The ipod works great now, no more flickering screen.
@joshrotondo6199
@joshrotondo6199 10 жыл бұрын
Where can i get those clamps from and how much are they? Is there anything I can use as a substitute?
@lfhlaw
@lfhlaw 10 жыл бұрын
Does the Screen have to be on for the iPod to Charge or connect to the computer?
@paulypaulwall25
@paulypaulwall25 12 жыл бұрын
Can you put in the new screen without the top metal bracket from the old Ipod? Apparently when my Ipod fell I lost this piece.
@Miatamafio
@Miatamafio 11 жыл бұрын
Thank you guys so much for this, i would have broken it if not for you guys! i am 14 and did this successfully
@juluajuan
@juluajuan 11 жыл бұрын
Thank you, very helpful tutorial!!
@calliehf1
@calliehf1 10 жыл бұрын
I just completed the new screen / LCD digitizer installation and everything is working fine. The screen is not completely flush on the left side because I damaged the bezel at a spot about 3/4 of the way down on the left. It is almost all the way down but not quite. I do not want to try & force it flush because when i had this problem with my 2nd GEN it cracked when i tried to do that. I am happy the way it is, should i just put it in a fairly strong case to protect it. Will a small amount of Super Glue gel along that left edge help?
@mightyarnold2439
@mightyarnold2439 11 жыл бұрын
Thanks, I've fixed my brother's ipod thanks to you! (:
@miachastain5252
@miachastain5252 10 жыл бұрын
Is the super glue gel an option?
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Replacing the screen is the best option. I cannot guarantee that replacing the screen will correct the issue.
@holty666666
@holty666666 11 жыл бұрын
Thanks for this video I found it very clear and precise and I fixed my ipod thanks again!!!!!!!!
@sumitojha
@sumitojha 10 жыл бұрын
after waiting this 19:33 long video I understand that it's not possible for me to replace the screen at home. is this possible to send you ipod and you will resent after fixing it
@gadgetmenders
@gadgetmenders 11 жыл бұрын
You will need to verify that the digitizer cable is snapped in securely. This is the screen cable that plugs in underneath the logic board.
@TheSubwinch
@TheSubwinch 12 жыл бұрын
Hi, I followed all the steps, and my ipod turns on fine and looks great, but the bottom half of the screen is unresponsive (the 'slide to unlock button') while the top half works great (the 'volume adjustmen't, after you double click the home button) do you know where I went wrong? Any feedback is appreciated :)
@edgoodman9660
@edgoodman9660 11 жыл бұрын
hi I got to the step where you were testing but the touchscreen isn't calibrated so I cant turn off my device, does this matter? and do you know what I have done wrong?
@gadgetmenders
@gadgetmenders 11 жыл бұрын
You can re-install just make sure the two pieces of copper tape are touching. It's not actually 100% necessary to re-install the tape, just recommended.
@TomWhitchurch
@TomWhitchurch 11 жыл бұрын
does the digitizer cable snap in or does it just sit?
@tracypauldowns6791
@tracypauldowns6791 9 жыл бұрын
I purchased the Screen Replacement/Digitizer and completed the removal/install. I first got the white screen, but then reset it and now can see the screen saver. All is good. Picture on the whole screen. However, it does NOT respond to touch. Reset again. Still no response. What now??
@tracypauldowns6791
@tracypauldowns6791 9 жыл бұрын
never mind...thought about it and figured that the digitizer cable was probably not connected properly. It was not. Reconnected that...probably the hardest part of this whole process. Now it works. One note, though, my screen did NOT have the 2nd layer of plastic mentioned at 12:14. When I tried to remove this, I ended up damaging the screen, by trying to peel off something that wasn't there, so that there is now a big black spot in that part of the screen. Very frustrating to come so far and actually accomplish the task, only to have the big blob on the screen...
@eliasworld17
@eliasworld17 11 жыл бұрын
would it still work if i was not able to recover the metal piece from the top on the old one?
@msabel318
@msabel318 11 жыл бұрын
whatdoes the golden part of the middle silver plate do mine got into two piece i hope its not needed if yess is it replaceable plz let me know
@rweaver5087
@rweaver5087 9 жыл бұрын
what do you do if you did everything on the replacement and then the touch screen doesn't work and you cant unlock the screen?
@gadgetmenders
@gadgetmenders 9 жыл бұрын
R Weaver Check to see if the digitizer cable is full plugged in correctly and not torn. If it is, its possible that you got a bad digitizer. If purchased from us we will exchange defective parts.
@widlerjay5021
@widlerjay5021 11 жыл бұрын
Hello I have a quick question Since my Sister dropped my ipod its all cracked , the touchcsreen does not work also If i replace the lcd as on this video will it work
@glennbrogan8125
@glennbrogan8125 11 жыл бұрын
Thanks a million for this. You're a life saver
@SantosProd
@SantosProd 10 жыл бұрын
my iPod power button is jammed, so i use assistive touch to lock it.. is it even worth to try and fix my screen? what if i have to reset my iPod the power button doesn't work.
@josephm2041
@josephm2041 11 жыл бұрын
hey bro waht kind of gel do you use can you telme the name i am new in this
@emilyscott1368
@emilyscott1368 11 жыл бұрын
I wanted to fix my friends Ipod but it seems more difficult than I thought do you guys have people who send in ther ipods and stuff and fix it for them? if so how much would that coast
@MilliTheChosen
@MilliTheChosen 12 жыл бұрын
which way are you twisting the screws because the last one next to the rear camera won't come out
@RichR8057
@RichR8057 11 жыл бұрын
Hi, It did end up turning on and the screen works expect for a small portion of the screen( where the 7/8/9 numbers are on the lock screen) any suggestions? also I've tried the digitizer about twice
@yabuddy00
@yabuddy00 11 жыл бұрын
My iPod screen is wicked cracked and I can de the black part under the screen my moms getting me a screen for Christmas will this still work even though its badly cracked?!?
@OtakuFish13
@OtakuFish13 11 жыл бұрын
How do you know when the wires at 13:07 are completely connected? Will it click?
@Mandyizthename
@Mandyizthename 11 жыл бұрын
heyy I did everything correctly, got the ipod to boot up, connects to wifi, and the I can control the volume up and down,home button works, but the touch screen is not responsive. I was very careful. I have not fully restored the ipod yet, but i have tried holding the home button and lock button down multiple times. Do I need to get a new digitizer again or is something maybe not plugged in correctly?
@esmeraldarobles8880
@esmeraldarobles8880 12 жыл бұрын
is there a way for my sister to still replace the screen if the kit we ordered didn't come with the LCD screen? all we got was the glass replacement screen...
@jennifert6074
@jennifert6074 10 жыл бұрын
Does it matter what screws go where?
@faaiths5844
@faaiths5844 11 жыл бұрын
Would it still work with the lcd I have from the previous screen, your world I need to have anew one? I got the parts today my I pod, but the lcd yiy wasnt with it. Does that mean I can't fix it or what?
@Hmm265
@Hmm265 11 жыл бұрын
wondering if you can help me? my screen isnt so much smashed, its the thing behind the screen thats smashed and it looks like a puddle of ink and theres a white screen when i can just see my apps etc, do you have any recommendations as to what i can do if its possible?
@musicwavv5850
@musicwavv5850 10 жыл бұрын
hey uhhm what if the old ipod screen had seriusly bad dead pixels like black and white al that will this fix it? please get back to soon as possible!!!! im fixing right now and before i put it all in i need to know will it fix that also.
@gadgetmenders
@gadgetmenders 11 жыл бұрын
Make sure the digitizer cable is snapped in securely.
@hannahbednarek5108
@hannahbednarek5108 11 жыл бұрын
Will this help if the whole screens pixels are dead
@sarahbeaulieu5797
@sarahbeaulieu5797 10 жыл бұрын
Can I repair my broken black ipod screen with a white replacement one?
@oskireyes3335
@oskireyes3335 10 жыл бұрын
whats the point of the white paper behind the lcd ,i fix cellphones ,android and apple products ,and ive always wondered what the white paper does behind the lcd
@xxmwxxforlife
@xxmwxxforlife 11 жыл бұрын
thanks(: but how much for everything in this video about!?
@gadgetmenders
@gadgetmenders 11 жыл бұрын
The home button flex cable is adhered to the front and backside of the metal insert. You can find this part on our website.
@jesussoria7137
@jesussoria7137 10 жыл бұрын
I accidentally bent the plastic bezel inside and around the metal housing.. Is there a way to fix this? I also have a portion of my screen that is white when I turn it on but the digitizer works fine.. any clues? Hard reset didnt work
@gadgetmenders
@gadgetmenders 11 жыл бұрын
This will need to be replaced. It can be tricky and does require soldering but it's very doable. You can also consult with a local repairman if you don't feel comfortable attempting on your own. You can connect the device to your computer to retrieve the pictures and videos.
@tackyshacky
@tackyshacky 11 жыл бұрын
and of course i brake the power volume flex cable now my iPods not working is there a way that all my stuff can be transfer to that iPod to a new one or is it fixable if i broke it?
@iConeyyx
@iConeyyx 11 жыл бұрын
I broke the glass on mine but not the screen do I replace the whole unit as one or just the glass? Thanks
@Kristinapedia
@Kristinapedia 11 жыл бұрын
Go into settings, general and software update. If there is an update available it'll be listed. If it isn't, and it says, "Your iPod is up to date" then your ipod cannot be updated to that iOS. iPod Touch 4 can be upgraded to iOS6 but many features will not work. iPod 3 can only go up to iOS 5. iPod 2 can only go to the last version of iOS4 (4.2?)
@isaactbone7804
@isaactbone7804 12 жыл бұрын
how much does it cost to replace it? i cracked mine to days and i got it on christmas and i just want to no
iPod 4th Gen Battery Replacement/Repair
23:08
How2Tech
Рет қаралды 415 М.
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
iPod Touch 4th Generation Screen Replacement
12:59
DirectFix
Рет қаралды 126 М.
His Wife Threw his Gaming PC out the Window… Can I Fix It?
19:43
Linus Tech Tips
Рет қаралды 1,2 МЛН
iPod 4th Generation Click Wheel Reassembly Video
4:27
iPod Repair Clinic
Рет қаралды 12
I built the Dream Smart Kitchen
22:56
Mrwhosetheboss
Рет қаралды 2,3 МЛН
How to Repair a 4th Generation iPod Touch
7:51
Powerbook Medic
Рет қаралды 646 М.
How to: Replace iPod Touch 4th Gen Battery | DirectFix
8:52
DirectFix
Рет қаралды 213 М.
iPhone 5 Screen Repair Tutorial Instructions | GadgetMenders.com
10:53
iPhone 6 Plus Screen Replacement Tutorial Detailed How-To Repair
49:34