[TUTORIAL] Mechanism - installation video

[@rrahim3523]

Official video without sound? You can't be serious....🤦🏻😞

[@angelak6244]

No sound? It would be helpful!

[@TitusAduxas100]

I have fitted dozens of these. Its a good idea to have all the parts in the one pack, I never had to go to my merchants to get additional bits because something didn't fit. The fill valve is good but the flush valve is a total pile of junk, they never work properly. The big problem is the valve closing a second after the flush starts. They shut regardless of where the float is set. I regrettably no longer use them. What is the point of demo video with a dry cistern in mid air, I suspect its because if it was done wet it would show the flush problem. Also the two tiny lugs that hold the cable mechanism to the push button snap real easy !! that's just poor design.

[@jim586]

I couldn’t agree more.

[@matthaigh5296]

Not very helpful at all! What is the threaded plastic and sliding thingy on the side of the flush unit? what is the adjustment process for that?

[@jim586]

That’s what I’d like to know. I asked a plumber and he didn’t know. He said avoid!

[@ezekiasmkhabela4376]

Thanks for the video 🙏🏿🙏🏿

[@heloisehunterbmh2810]

How does the wire connect to the main flushing mechanism? It was detached in the box, and we can't get it working.

[@loupmoche6029]

Merci vous avez sauvez mon caca

[@BigBlueRabbit]

Video as as unhelpful as the instructions. Lack of sound also shows they didn’t even check the upload. Unbelievable.

[@gallan671]

Have I gone deaf?

[@raphaellesevestre4724]

Peut on l 'installer sur une cuvette qui a le poussoir sur le côté ?

[@mktweb441]

Le câble et son bouton peuvent tout à fait se monter sur le côté du réservoir. Il faut s'assurer au préalable que le trou est de dimension suffisamment grande (c'est à dire au mini 14mm) pour faire passer le bouton. Trou de 14 mm = en applique se reporter à la notice. Le bouton serait donc à l'opposé du robinet flotteur (en face). Le câble est conçu pour fonctionner dans toute position du moment où la longueur de ce dernier est suffisante. Si besoin de plus d'info contactez notre service SAV (www.wirquin.fr). Merci de votre confiance

[@MrTizy75]

bonjour il n'y a pas de son c'est normale ?

[@prostoUser233]

Да всё хорошо. нужна реклама.в Леруа выбора нет. ассортимент фирмы урезан все импорт унитазы были куплены 10 лет назад, никто не понимает ,можно ли Геберит выкинуть и поставить Виркин.