Tutorial: Mixed and Repeated-Measures Factorial ANOVA

0:05 - Setting Up Data
5:03 - Repeated Measures ANOVA
24:50 - Mixed Factorial Anova

[@betsw]

I have been trying to figure out the difference between Mixed factorial ANOVA vs Repeated Measures ANOVA and this video perfectly clarified it. Thank you so much!!

[@Raquelication]

THANK YOU! I'VE BEEN SEARCHING FOR HOURS FOR A VIDEO THAT INTERPRETED THE SIMPLE EFFECTS. I hope your life has been amazing since 2014. and this is coming from 2020.

[@rabbilbhuiyan5666]

Hi Rocchi. Thank you for the excellent video with clear explanation. I have ended up my three days search for such kind of analysis after your video. Thank you so much !

[@dansmith1325]

Great explanation. The clearest I have seen on any video. Thank you.

[@destiny9420]

Thank you for this, I didn't realise I had to look at the between-subjects effects and would have missed out on a big chunk of marks for not reporting my main effect of groups! Thank you thank you thank you

[@jacquelinemichael2201]

I've been struggling with a mixed design assignment, this helped so much, it's explained so clearly. Thank you

[@lawsonkarsyn677]

Instablaster...

[@rafaelalamilla5583]

This was very well done and useful! Thank you for uploading!

[@charliesuruban3218]

Thank you so much for the lesson, I am grateful for what is presented.

[@juliocerono_stone5365]

Excellent video- Nice and clear explanations_ hands on!!

[@danke9818]

Thank you very much for your tutorial! It helped me a lot. Wish you all the best!

[@sahaniiiful]

Thank you so much Meredith, it is a great video,you are explaining very well and the whole video is very informative.

[@RominaGalea]

Thank you so much for explaining in so much detail!

[@bdoolaard]

Thanks a lot for this video! Very useful. Saved me a lot of stress while writing my thesis :)

[@Someleftyb1tch]

Thanks so much, this is the only useful video I've been able to find!

[@linkotalks]

hey for creating sections on KZbin, your first section should start at 0:00. Plus it's very nice helpful tutorial, Thank you so much

[@chungheonlee803]

This is crazy!! Thanks a lot!

[@fmesa8704]

Thank you so much for this video! So helpful!

[@ThatKidHayley]

Thank you for this video!! It has helped me so much with writing my dissertation :)

[@alexanderschmitt3231]

Thanks! Without ur help I would be lost! :-) My PhD father is going to be happy if I show him the new data.

[@arjunyashvardhan8001]

It is very informative video. My all doubts are clear now regarding repeated measures and mix measures. Thank You so much!!

[@crankus]

thank you so much. I was desperate before watching this video :)

[@bahar2151]

You are the best!! Thank you so much!

[@Shredy-1]

Great video! Thanks so much :)

[@taisoetan1]

Thank you for doing this.

[@waelgomaa7347]

Wonderful presentation

[@MsOdot]

COULDNT THANK YOU ENOUGH

[@ilianasevdali1972]

Thank you so much!! So helpful!! :)

[@danielamoako-sakyi4855]

Great video. One question please. How do you correct for a violated levene's test especially when the groups are unequal? Thank you.

[@nikeish]

thank you, how would I do this for intervention vs control group in the same data set? is this possible? or do I need to have 2 different data sets one for experimental group and one for the control group?

[@TheHelenvm]

Hi Meredith! I just watched the video and noticed that when you enter the within-subject variables (Movie, Location) you enter both the variables for action movie as second variable for movie, and next drama as third variable. However, when you are analysing the data, you consider movie 2 as drama and movie 3 as action. Just wanted to let you know.

[@tropicalpesticidesresearch4920]

Educative Video

[@MikeFelding]

I love you right now!!!

[@rajeshgunesh]

Thank you so much :)

[@MrKaushal1988]

Nice video expalining very clearly about the difference between Mixed-ANOVA and repeated measure.......... could you please explain about split plot design,,,,,,..... also how to report the results in APA

[@riotcap]

thank you dr. rocchi, very clear. what happens if the Leven tests spits out p

[@waitinglouistsang9806]

Thank you for the video. I've got one question. What would happen if the some of the subjects does not have data at each single point, i.e. there are some blank cells in my dataset.

[@pachmanx2393]

hi Meredith, really useful, in fact best across all anova videos i watched on you tube! can you post a video on a more complex mixed anova, so where you will have to look at 3 way interactions? and as it may take a while since you may do so, can you help me with a little query? i am looking at a 3 (bet) x 2 x 2 x 4 (all within) anova at the moment, where i have quite a few 3 level interactions. as these are the highest order interactions, assume i should ignore everything else and look at these ones. how shall i do this? based on your video, i run post hocs for all 3 level interactions (so pairwise comparisons for each combination of factors, for example x on y*z, y on x*z and z on x*y - is this correct? and would looking at the effect of each (x, y, z) on the interaction between the other 2 variables would do? sorry, but there seems to be nothing online on 3 way interactions ...

[@nikoschristodoulakis7936]

I have one question. I did an analysis of a 2x2x2x2 factorial anova. The first 3 variables were repeated measures and the last was a between groups analysis. The data in the repeated measures were all reaction speeds. The names of variables were Zoom, Movement, Emotion and Orientation(between). I found two statistical significant interactions between Movement and Emotion, and Zooming and Orientation. Now i want to examine in both interactions which pair of means were statistically different. But I can't do that in the Movement xEmotion interaction with a simple t-test because my dataset has 8 variables and not 4. Also how do I do it in the Zooming x Interaction?

[@sarrasaleh8608]

Ure awesome *-*

[@jgaguimaraes3033]

Firstly, thank you for your help. In the cas of a 3-way split-plot ANOVA (2 between-subjects factors and 1 within-subjects factor), is it enough to add one more factor or should some other procedure be performed? Besides, is it possible to get a "tradicional" ANOVA table with all these results?

[@omaraltamimi8970]

I can not thank you enough

[@bokkieyeung504]

really appreciate it! I have one question regarding the simple effects: why it is a "univariate tests table" for the simple effect of gender, while a "multivariate tests table" for the simple effect of time? is that because gender is between-subjects factor while time is within-subjects factor?

[@riesenpurzel]

I have a question about one statement which is in contrast to what I have heared in another guy's tutorial: I refer to Mixed Anova. Why skipping the 'Multivariate Tests' at 29:26 and instead interpreting time and interaction effects based on the 'Tests of Within-Subjects Effects' at 30:00? What is the different meaning of these two tables, when should I use one or the other? Thanks a lot

[@arjavanbakht]

I have a 3 x 2 x 2 repeated measures ANOVA while one group has almost twice number of subjects than the other group. I could not find a way to do repeated measures ANOVA with bootstrapping in SPSS. Could you please advise how I can take care of this problem in SPSS. Thank you

[@santoshagrawal1833]

What if we want to do fast analysis without writing syntax. Will it give pairwise comparisons for two different treatment grs

[@venkatakrishna176]

hai,i have 10 groups(4 animals in each) and 0,60,120,180,240 days measurment of Testosteron hormone . how to do the repeated measures

[@spiceynectar]

I dont know how to do this if there is only one variable with the different conditions or levels, it wont let me add to the factors to create a mixed model anova

[@Gains2Brains]

For your mixed anova let's say you added in caffeine consumption as a between subjects factor with 3 levels: Group 1 consumes 0mg of caffeine, group 2: 100mg/kg of caffeine and a third group that consumes 200mg of caffeine. While still having gender as a between subjects variable and energy as a repeated measures what analysis would you run?

[@zubinbhavsar6655]

hello, can you please show me how to perform 2x2x8 Mixed ANOVA in SPSS between subject factor 2 levels 1)CAI 2) Control, within subject factor 2 levels 1) Injured 2) Uninjured , with 8 levels of directions (AL,A,AM,M,PM,P,PL,L) I am Sports Physio. & i am doing study on tennis players with ankle instability for my Thesis ( masters). I have done the experiment, I have collected the data, but i am facing huge difficulty in feeding it into SPSS and analyzing it. Can you please help me with it. So that i can submit my thesis before deadline. It means a lot to me.

[@salahadidi3273]

But how these new variables( home_comedy, home_drama...) Were created???