Tutorial - Rekord Trigger adjustment

[@raycarl7933]

Thank you sir, I now understand more about my record trigger. The trigger on my HW50S IS the best ‘out of the box’ trigger I’ve ever owned (I’m poor) so haven’t touched it. yet

[@garytaylor6169]

Thanks for the tutorial Neil, it really helped, especially putting it back together. I've just bought a new HW80 and the sears are slightly different but video is still relevant. 😊

[@ronh7882]

Excellent. Well explained and easy to follow. Just bought a s/h HW77 with a very light trigger - won't be for much longer !Thank you.

[@joekelly9369]

Great informative video , iv used your videos to tune a few triggers on newer guns , older triggers seem to polish themselves with prolonged use .. thanks proffessional advice

[@richardcollett3218]

Great video just like all your others, helped me with my HW77k, top man

[@jimvlahos121]

Thanks for the tutorial, my HW97 uses a T8 torx rather than the T9. Very helpful information.

[@ob1488]

Great video thanks I have a new HW95 with no first stage and a heavy pull. So I just need to back out the screw and move the tab forward thanks.

[@shootingatdawn]

I have done a video on how to polish the contact surfaces - look for rekord trigger disassembly and polish.

[@joekelly9369]

Thanks again buddy

[@antonioafonso9929]

Many thanks for the information and congratulations for the excellent video. I have an HW and thought there was only one screw to adjust the trigger.

[@tomhughes5123]

thanks iv tuned both hw97 triggers off this video .. both are smoother and have a more predictive let off , thanks

[@GordonBird]

I followed people who like a really light trigger but with plenty of engagement for safety. That I found was that: at 2 ibs and of course less; the trigger pressure adgusting screw backed out with recoil until it became a hair trigger!.This is on my HW99S!. I like my trigger at about 3.5 lbs!..LA5 UK

[@anthonyroach1148]

Great info ..just set my trigger ..really nice now with more bite to it ..Thanx Anthony

[@tasmedic]

Very helpful. Now, how to polish the contact surfaces?!

[@alant5335]

Simply brilliant,just the job.

[@redpillnibbler4423]

My HW35 has a lot of creep on the second stage,do I adjust the small screw in front of the blade to reduce it please?

[@RadjahZigenhorn]

Hallo i have a 97k, my trigger ajustment screw keeps coming lose KZbin can see it Turning a bit every 10 shots. What can i do about this also i Fired like 2500 shots now wen i Just got the rifle the reciol was east to shoot with a twang, now there is no twang and the rifle is harder to shoot you really have to grip the front then groups are still good about as big as 10eu cent a bit strange a liked the relaxed shooting with no reciol. Pleas help

[@AirRifleSport]

Thank you for a good, informative video. I will make use of it to adjust the trigger on my new hw97k, as it is far too heavy.

[@shootingatdawn]

+AirRifleSport glad it helps :)

[@stephengunrunnerhanson3550]

A very good video and thank you for showing the right way and the wrong way, had my triggers to light and was not happy so now i have the first stage and just press a little harder and it goes off. And finding the shooting is better i think if its about 2.5 to 3.4 pounds of pressure, it makes a good safe trigger and better to shoot, a to light trigger does not mean better thanks

[@JudahMaccabee_]

When you pull the trigger: is there any takeup, then you feel the 1st stage resistence, then it comes to a solid stop and then fires upon further pulling (2nd stage) ?

[@jeremysaunders9916]

Helped a lot, thanks. Jez.

[@leftymadrid]

Great info my friend, my HW97KT has a wonderful trigger, but would like to lighten it just a bit, amazed on how this German air rifle performs!!!

[@mireland6714]

Hey great video. I've a .22 that won't lock and hold when cocking to load. What would the problem be and hoe can I fix

[@stecartmel]

Hi theře mate, I've a 97 and it's put together the action is not separate from the stock. Can you tell me which way to adjust the trigger so my trigger is lighter.. Do I screw it more inwards or outwards so it's lighter to pull. Thanks

[@Keviin2310]

the rekord trigger is awesome. when the necessary parts are polished and added new grease, you can adjust the trigger characteristics almost to a match trigger

[@normanedwards7220]

Good tutorial, thank you😊

[@Freshman210]

Thank you. Has proved to be very useful

[@laurenceduerden4778]

Really good tutorial that. Thanks.

[@joaorebochooaw6321]

I need some help. My Rekord trigger will not reset after I pull the entire first stage. Basically, you pull the first stage all the way until you hit the clear wall of the second stage, and if I let it go here, it just loses all pressure of the first stage, basically just dangling, and when I go to pull it again it's basically just the second stage since the first stage no longer has any weight to it. So strange. This has only happened on this one particular rifle and none other of my weihrauchs. What's happening here?

[@shootingatdawn]

Try increasing the pressure on the trigger using the large screw. If that doesn't sort it, strip it again and check everything - you cannot have a first stage that doesn't reset on its own - its dangerous.

[@joaorebochooaw6321]

@@shootingatdawn fair enough, will give it a shot

[@adambacker8178]

Great informative vid

[@roberttheriot7612]

i have a question: no matter what i do trigger is very very very very very light. i can not make it harder no matter what i do. do you think something is wrong with the whole trigger assembly. also great video

[@jimmy66603]

Great clip as per usual mate. I used your other video tutorial on my first ever strip and rebuild of a rekord trigger about 2 yrs or so ago. It was a success. I polished the sears etc and got it back together nicely. There is nothing wrong with the present trigger on my 97 at all. It's just a standard original silver alloy hw trigger blade. I've just ordered the Rowan set back in brass. It's too late now,...its on it's way and I'll be fitting it. But I was just interested if you have an opinion on these set back triggers, and is there anything I need to know other than knock the pin out, fit the new one, and replace the original adjustment screw with the shorter one that apparently us included in the kit...? 🤝👍👏

[@Fishandchips9028]

How was the new set back trigger? Im thinking of getting one as i find the reach is too far on my hw95

[@aflatminor]

Superb explanation!! Regarding your username- I'll bet poor Dawn is fed up of you chasing her round shooting at her!! :))

[@shootingatdawn]

+aflatminor lol mate - Dawn actually is my other half and I chose the user name just because we thought it was funny.

[@shootingatdawn]

+aflatminor Dawn is actually my Mrs ;)

[@aflatminor]

shootingatdawn Hee hee!! I was only kidding and never thought your good lady wife was actually called Dawn!! :))

[@englanddartsreviews3348]

Yes - the 'shootingatdawn' name was only ever meant as a joke from the start :D

[@altered_imagers]

Thanks , trigger reset to a much safer position

[@tadpoles10]

Thanks for sharing the basics. atvb t ..

[@robbanks6752]

Why is nobody doing a video on the safety catch tab , if you disturb this tab in any way you'll have a job getting the safety catch to stay in place so I thinks video concerning this subject would be very helpful to viewer,s or is it just me.

[@Bigsbeee]

very good..thank you

[@scrinja]

Great video but the Torque screw is a T8 Dude

[@garychillingworth]

Thank you

[@holmes1978]

So intelligent !!!

[@79_air-arms-shooter29]

Cheers fella

[@shootingatdawn]

[@franciscopeixoto6609]

11 kooks disliked a informative Rekord trigger

[@shootingatdawn]