Tutorial T-Max Full Glue UV Light Tempered Glass Screen Galaxy Note 9, Note 8, S9+, S8 by UNOMAX

[@ninongaaronstv1654]

Astig nmn

[@EpisodeAnon27]

Can you make an English version of this for instructions? Thank you.

[@mchief190]

I can help out with the translations 0:32 = Wipe the screen layer with the alcohol wipe 0:38 = Wipe the screen layer with the microfiber cloth 0:42 = Protect the earpiece with the "speaker sticker" 0:56 = Release the S-Pen to make things easier 1:02 = Protect all the ports located at the bottom of the handphone 1:22 = Apply the applicator tightly 1:27 = Cut the alcohol wipe into two segments and apply one to each side of the applicator 1:41 = This is to absorb excess glue that goes out of the applicator 1:51 = Clean off any remaining dust with the dust remover 1:57 = Prepare one bottle of the UV Glue and cut its tip 2:04 = Turn anti clockwise and pour out two pools like this 2:17 = Two pools will ensure proper distribution of the glue 2:24 = You do not need to use all the glue, just enough to make a diameter of 2.5 cm per pool, this also ensures the glue does not overflow. 2:32 = Peel off the seal of the tempered glass and position it across the applicator 2:39 = If bubbles like this occur, lift the tempered glass and clean the glue with tissue or the dust remover. 2:55 = Re-position the glue pool toward the center 3:06 = If bubbles still persist, poke them with the tip of the repair card 3:19 = If there are no bubbles, release the tempered glass and let the glue flow freely to the ends of the phone 3:27 = Position the tempered glass on the applicator and ensure that it's centered 3:42 = If bubbles appear to the sides, rub them out gently with the repair card 3:46 = Shine the UV LED on the positions where you made the top and bottom glue pools, each segment will have 15 seconds of UV treatment 4:02 = Release the applicator and discard the protector stickers 4:10 = Prepare the extra alcohol swab 4:18 = Wipe off any excess flue from around the edges of the tempered glass (don't rub too hard) 4:23 = Shine the UV LED on the same positions as before for 45 seconds or when the lamp turns itself off 4:32 = Now shine the UV LED on the top, bottom and middle. 4:50 = T-Max UV Glue is fitted perfectly. That's it, hope this helps.

[@gunawanjva6463]

Kalau beli sekalian pasang dimana bang,dekat jakarta selatan

[@imamsusilo2567]

Ini setelah pasang, di sisi2 TG nya ada lem yg beku2 gt ga jd kotor plus penuu sm debu? Soalny di TG saya model begini kejadian kek gitu. Jd g enak bgt d liat.

[@unomaxid]

lem2 beku itu bisa muncul karena adda lem yang luber tapi tidak dibersihkan sebelum di UV, jadi sebelum disinari pastikan tidak ada sisa lem yang luber dulu kak

[@HanaAnisa-y7c]

Coba donk kak tutorial melepasnya. Biar perya kalo memang pas di lepas ga berbekas

[@unomaxid]

ada kak di video lain ya: kzbin.info/www/bejne/p6jak2qGo8qGsJI

[@choirulanwar4334]

Yg bagus lemnya dipakek semua apa enggak

[@unomaxid]

kalau untuk produk yang belum ultrasonic fingerprint seperti Galaxy S10 ke atas, lem dipakai 1 botol tidak apa2 kak, kalau untuk ultrasonic fingerprint disarankan kurang dari sebotol, ikuti takaran yang dianjurkan, agar fingerprint tetap sensitif ya

[@indraprayoga6840]

Uv glue nya apa aman buat oleophobic coating yg ada di layar hp ?

[@unomaxid]

aman ga merusak lapisan oleophobic kayar

[@TheDerian29]

saya udah beli ini kak. tapi pas pemasangan ada yg meluber di sisi layar pas dikasih UV malah jadi gembung . cara menghilangkan nya gimana yah

[@rizkyinsanitaqwim6168]

Min khusus untuk s9 yang ip68, tempered glass nya apa gak lepas klo pas s9 kena air, seperti kehujanan gitu?

[@unomaxid]

aman kak diajak berenang juga aman ga lepas2 :D

[@mantap_rin]

ini sama white dome lebih bagus mana

[@unomaxid]

kualitas mirip kalau kata customer yang pernah pasang keduanya, tapi jauh lebih ekonomis T-Max kak

[@Do_not_assume]

How can I buy this and get it shipped to the uk?

[@unomaxid]

unfortunately, right now we only sell in Indonesian market

[@rayzajp536]

Kalo untuk pemasangan offline apakah ada biaya tambahan ? Kebetulan toko Offline nya dekat dengan rumah

[@unomaxid]

Rayza Jp pemasangan di store free installation kak :)

[@juliusrian9584]

Gan, kalo nanti di lepas ngebekas ga lemnya pada layar?

[@unomaxid]

aman kak, tidak berbekas kak lem nya, bisa di bersihkan...

[@pj8736]

How much cost uv class??

[@pj8736]

How much cast uv class???

[@novanaldo6372]

Ini aman gk gan di layar , seumpama glass pecah trus pengen ganti , lemnya bisa dibersihkan atau tidak ?

[@unomaxid]

Novan Aldo aman kak dilepas tidak meninggalkan residu sama sekali yaa

[@novanaldo6372]

Oke gan

[@ganatras]

Kalau pakai case UAG lepas ga ya?

[@unomaxid]

pakai case UAG aman kak case friendly

[@BambangFebriono]

@@unomaxid pakai case original samsung aman ndak kak?

[@rizkyinsanitaqwim6168]

Admin, kok untuk camera tidak ada stiker pelindung nya? Apa gak papa kena lem liquid nya? Gak terpengaruh kamera jadi burem gitu?

[@unomaxid]

aman kak ga ngaruh kok kan pas sebelum di UV dibersihkan dulu, ga bikin burem kok

[@ferryrahmansetiawan2492]

Bisa nutupin bekas baret gak?

[@unomaxid]

Ferry r bisa kak bekas baret yg lumayan dalam pun jd tertutup 👍🏼

[@denniesofyan]

Bisa beli sekaligus pasangin gan?

[@unomaxid]

dennie sofyan bisa kak lgsg contact CS unomax yaa

[@niconnelo]

toko offline ada ? bs pasangin

[@unomaxid]

ada kak unomax Ruko Sinpasa D-08, Jl. Bulevar Selatan Summarecon Bekasi Jawa Barat - 17143 maps.unomax.com

[@yayatsupriyatna7989]

Sensitivitas layar berkurang ga min?

[@unomaxid]

Yayat Supriyatna aman sensitivity layar ga berkurang sama sekali kak

[@rocketbunny5429]

Kalau ada bagian yg retak ketutup gak gan?

[@unomaxid]

kalau retak halus bisa ketutup kak, kalau retak parah takutnya malah tidak bisa menempel dengan baik

[@marhan1741]

Kak ini mudah pecah gk?

[@unomaxid]

kuat kak ga mudah pecah, lebih kuat dr TG yg lain

[@kojaysan.]

GAGAL GUA MASANG NYA! UANG YG TERBUANG SIA-SIA 😭

[@unomaxid]

claim garansi aja kak di garansi.unomax.com